Muhammad Tauseef

• I am Responsible for Operation, Maintenance, Overhual, Repair, Spare Change & Schedule Inspection of 02 GE LM6000 PG Gas Turbines 47MW
each (Power Generation), 04 Rolls Roys AVON-200 Gas Turbines for water injection pumps, 01 GE LM 2500 Gas Turbine for water injection pump,
01 Gas Turbine P&W for water injection pump, 04 Gas Turbine Dresser Rand for Gas Generator and 03 Waukesha Gas Engine P48 at Upper Zakum
Oil Field and 05 GE Frame 5P Gas Turbine 22MW each for Power Generation, 03 Waukesha Gas Engine L7042, 05 Waukesha Gas Engine P-48 at
ZIRKU Oil Field.
• Prepared and implementation of LTSA with OEM, CI Inspection, Hot Gas Path Inspection, Major overhaul of Gas Turbines, Operation and
Maintenance procedure, correspondence with OEM regarding Technical issues modification according to service bulletin.
• Prepared and implented COO Call Off Order, COC Call Off Contract with different contractors according to requirment of project/Overhual/Repair
and Maintenance jobs.
• Prepared tender docouments for projects/retrofit project/up grade/maintenance and repair of different machinery such as Gas Turbines etc.
• Attend tender board meeting and provide justifition to ADNOC top managment for tender approval according to requirment.
• Particapate, witnes and approved Machinery Inspection(Specialy Gas Turbines) after overhual with OEM according to ISO or OEM standard.
• I am Responsible for Reciprocating Air Compressors, Screw Air Compressors, Centrifugal Pumps Single Stage & Multi Stage, Valves, Heat
Exchangers, Fans aintenance, overhauling, Cleaning, Repairing Spare Change & Schedule Inspection.
• I am responsible for Preventive Maintenance of Centrifugal Gas Compressor.
• I have done 03 miner inspection of Centrifugal Gas Compressor.
• Prepares work permit and risk assessment for routine maintenance / repair work, decommissioning / work of machinery and equipment.
• Application of cause and effect analysis on plant abnormalities, identifying root cause and implementation of corrective actions.
• I am responsible for replacement of Gas Turbine closer/mat filters, pre filters and HD filters.
• Completed more then 01 Major Overhauls of anger solerand Screw Air Compressors.
• I am responsible for maintenance of computerized preventive Maintenance system of the plant, equipments and through MAXIMO.
• Monitoring, scheduling, man power deputing for plant maintenance Liaison between operation and maintenance.
• Familiar with Distributed control systems (DCS), Central monitoring system of Plant.
• Assist in the development of operation, maintenance and safety procedures.
• Analyze and record instrument readings and equipment malfunction.
• Troubleshoot, perform corrective action or minor repairs as required.
• Clean, lubricate machinery and components and use computerized Preventive Maintenance System.
• Maintain daily log of operation, maintenance, safety activities and w rite plant or building operation reports.
• Design and Implementation of maintenance policies including best practice preventative / predictive maintenance.
• Optimizing the coordination of plant maintenance including shutdowns.
• Promoting & Fostering teamwork and empowering and developing maintenance teams to deliver optimum maintenance capability.
• Active participation in preparing Annual Operating Plans (AOPs) and maintenance budgets.
• Management of stores, optimization of parts holding & cataloguing.

• Completed 02 no of minor inspection siemens gas turbine V94.2 (150 MW) at IPP Roush Power Plant Pakistan.
• Completed 01 no of major overhaul siemens gas turbine V94.2 (105 MW) at IPP (KAPCO) Kot uddho Power Plant Pakistan.
• Completed 02 no of HGPI inspection siemens gas turbine V94.2 (105 MW) at Baiji Power Plant Iraq.
• Completed 01 no of major overhaul siemens gas turbine V94.2 (105 MW) at Baiji Power Plant Iraq.
• Completed 01 no of HGPI siemens gas turbine V64.3 (67 MW) at Defence Co-Generation Plant DCL Karachi Pakistan.
• Performed visual Inspection of Siemens GT V94.2 Tools including Special Tools at Roush Power Plant Pakistan for Life Time Extension Overhaul.
• Completed 02 Major Overhaul of Siemens V94.3A(250MW) Gas Turbine at Al Taweelah A2 Combined Cycle Power & Desalination Plant UAE
• Completed 01 Minor & 02 HGPI Overhaul of Siemens V94.3A(250MW) Gas Turbine at Qatar Power Company Ras Laffan Combined Cycle Power & Desalination Plant Doha Qatar.
• Completed Life Time Extension Major Overhaul of Siemens V94.2 Gas Turbine at 450MW Roush Power Plant (CCPP) Pakistan.
• Completed 02 Major Overhaul of Westinghouse Gas Turbine (2X52MW) at Fauji Kabirwala Combined Cycle Power Complex Pakistan.
• Completed 03 HGPI Overhaul of Siemens V94.3A Gas Turbine (3X250MW) at Qatar Power Company Ras Laffan CCPP & Desalination Plant Qatar

• Involved with EPC Team in the Erection, commissioning & startup of GE LM 6000pc & Rolls Royce RB 211 GasTurbines and supporting auxiliary.
• Supervise, Direct and demonstrate the Day to Day Maintenance Activities, Engineering Requirements, Trouble Shooting and Overhauling.
• Responsible for Safe and Smooth Maintenance Activity of Gas Turbine Rolls Royce RB211 Facility.
• Performing risk assessment & job hazard analysis for the various work areas.
• Supervise all Preventive & Corrective Maintenance activities according to MP2.
• Operation, maintenance of GE LM-6000PC & Rolls Royce RB 211 Gas Turbines.
• Major overhauls of Rolls Royce RT 62 Power Turbine, Engine replacement & installation activities.
• Work with GE’s Field reps for replacement GT hot section and combustion chamber components top casing LP, HP Compressor dressing.
• Perform independently maintenance on GE LM-6000PC & Rolls Royce RB 211 Gas Turbines, troubleshooting of GT components such as fuel oil,
fuel Gas systems and fuel Metering valves, chip detectors, lube oil inlet screens.
• Supervising the execution of day-to-day preventive and corrective maintenance & Activities related to mechanical plant and process equipment.
Condition monitoring (Inspection of abnormal sound, Temperature, vibration etc.) of all plant auxiliary are in operation to avoid any damaging

• I am Responsible of 02 Gas Turbines 13MW X 2 GE Frame 5LA Operations, Maintenance, Repairing, Spare Change & Schedule Inspect.
• Completed 02 overhaul of GE Frame 5LA Gas Turbine with GE Experts.
• I am Responsible of 01 GE JMS 320 GS Jenbacher Gas Engine Power Generator (1064KW), 02 Waukesha Gas Engine Power Generator (685KW)
VGFGLD P48, B&W HFO Diesel Generator(800 Kw) & Reciprocating Air Compressors, Screw Air Compressors, Gear Boxes, Centrifugal Pumps
Single Stage & Multi Stage, Valves, Heat Exchangers Maintenance, overhauling, Repairing Spare Change & Schedule Inspection.
• Completed 02 Top End Overhauls of P48 Waukesha Gas Engine and 01 Top End Overhauls of GE Jenbacher JMS320GS Gas Engine.
• Prepares work permit for routine maintenance / repair work, decommissioning / work of machinery and equipment.
• Application of cause and effect analysis on plant abnormalities, identifying root cause and implementation of corrective actions.
• I am responsible for complete operation and maintenance of 1 no fire tube boiler with steam generation capacity 8 ton/hour.
• Completed more then 10 Major Overhauls of Different Types of Screw Air Compressors Boge, Sullair and Ekomake.
• I am responsible for maintenance of computerized preventive Maintenance system of the plant and equipments.
• Monitoring, scheduling, man power deputing for plant maintenance Liaison between operation and maintenance.
• Completed installation and commissioning of gas generator 1 MW GE Jenbacher JMS 320 GS.
• Familiar with Distributed control systems (DCS), Central monitoring system of Plant.
• Assist in the development of operation, maintenance and safety procedures.
• Analyze and record instrument readings and equipment malfunction.
• Troubleshoot perform corrective action or minor repairs as required.
• Clean, lubricate machinery and components and use computerized Preventive Maintenance System.
• Maintain daily log of operation, maintenance, safety activities and w rite plant or building operation reports.
• Design and Implementation of maintenance policies including best practice preventative / predictive maintenance.
• Optimizing the coordination of plant maintenance including shutdowns.
• Promoting & Fostering teamwork and empowering and developing maintenance teams to deliver optimum maintenance capability.
• Active participation in preparing Annual Operating Plans (AOPs) and maintenance budgets.
Management of stores, optimization of parts holding & cataloguing.

• During this period worked on assembling, alignment and overhauling of different types of pumps, Diaphragm pumps, Centrifugal
pumps, Rotary positive displacement pumps.
• Worked on assembling and overhauling of different types of Screw Air Compressors and Reciprocating Air Compressors.
• During this period worked on instillation and commissioning of different types of Valves, Pumps etc

I have worked with Saudi Electricity Company Staff during annual overhauling in the area of GE Frame 7 Gas Turbines.

• I have worked on different types of Pumps, Valves, Reciprocating Air Compressor, Centrifugal Compressors & Boiler Plant Repairing &
Maintenance Carried Out.
I have worked on Gas Turbines with Experts.

• During this period Worked on Overhauling & Alignment different types of Pumps, Valves, Heat Exchanger, Fans Reciprocating
Air Compressors.
Complete overhauling of ABB steam turbines unit TP 6/4 (6 MW x 3) at 40 bar with ABB Experts

• During this period Worked on different types of pumps i.e. Horizontal & Vertical different types Of valves, Air Compressor, FD Fans, ID Fans,
GR Fans, Heat Exchanger overhauling cleaning and repairing work carried out on water tube boiler unit 650 ton/hr capacity.
Completed 02 major overhaul of Steam Turbine Unit 1 & 2 Hitachi 210MW Each (TCDF) with Hitachi Experts