Shaja Ul hassan

• Carried out preventive and corrective maintenance of Electrical & Instruments equipment
during normal operation and shutdown of plant including LV, MV and HV.
• Ensure that all site electrical instrumentation and control equipment is operating safely and
at maximum efficiency.
• Walk construction sites, climb ladders, climb stairs, climb poles, walk on uneven ground,
exposure to sun and weather conditions.
• Responsible for coordinating work to ensure the maintenance and integrity of the high volt
system, Transmission & distribution, Transformers, Motors and Switchgears.
• Familiar to work on High voltage electrical Power Systems and ensuring compliance with
safety regulations and standards. Working on Low voltage and High voltage transmission
lines, transformers and switch gears.
• Diagnose problems by interpreting and working from engineering drawings, blueprints,
schematics and equipment manufacturers literature.
• Familiar with mass flow meters, pressure transmitters, temperature transmitters,
burner control systems and other like equipment found in an automated plant
required.
• Performed preventive maintenance on high voltage systems, reducing failure
rates and improving performance.
• Also do maintenance work in Power Plant and Substations.
• Trained junior electricians on high voltage safety practices and maintenance procedures.
• Conducted thorough inspections and testing of high voltage equipment, including
transformers and switchgear.
• Providing technical reports and documentation, according to company standards.
• Capable of preparing maintenance proposals and technical reports.

• Conduct the Preventive, breakdown maintenance and planned overhaul activities of
electrical equipment based on QA/QC procedures and centered reliability techniques.
• Access the task and ensure that the job is performed as per SOP and requirements
complete the maintenance activity sheet and closeout the Maximo work order.
• Isolation and connection/ disconnection of LV and HV machines and equipment.
• Conduct the toolbox meetings wherever essential to ensure the safe execution of a job.
• Diagnosis and repair of breakdown equipment to ensure timely repair and back in service.
• Participate in the assigned plant Turnaround / shutdown activities and ensure timely
completion of jobs.
• Identification of areas for improvement in the activities performed and assists the senior
section personnel to carry out modifications and improvements to the system.
• Carry out visual inspection and vigilant to identify any developing problem in the area
assigned, and report to the relevant supervisor.
• Inspection and testing program of electrical hand tools and portable equipment.
• Emergency Response during blackout.
• Act independently in the field.

• To manage the troubleshooting and keeping minimum breakdown time and maximum
efficiency.
• Carried out preventive and corrective maintenance of Electrical & Instruments equipment
during normal operation and shutdown of plant including LV, MV and HV.
• Ensure that all site electrical equipment is operating safely and at maximum efficiency.
• Diagnose problems by interpreting and working from engineering drawings, blueprints,
schematics and equipment manufacturers literature.
• Involved in the Electrical System commissioning, take over process & Operation
maintenance of the Entire Fluorine Chemical Complex.

• I am capable of serving as the catalyst for achieving organic growth through effective
contributions.
• I possess 04 years enriched experience in the areas of Operations & Maintenance,
Strategic Planning & Execution, Quality Management System, Cross-functional
Collaboration, Resource Management, besides others.
• I am associated with Marfa International Power Company, Abu Dhabi in CCGT, OCGT and
STG Area.
• Successfully managed projects from conception to completion dealing with Construction,
Procurement, Engineering, Quality Assurance/Quality Control (QA/QC) and Health, Safety
and Environment (HSE).
• Attained saving through cost saving measures.
• Implemented specific operational policies/plans & programmed in concert with general
policies.
• Effective leader with excellent motivational skills to sustain growth momentum while
motivating peak individual performances.
• Carried out preventive and corrective maintenance activities during normal operation and
shutdown of plant.
• Preventive maintenance of SEW drives, VFDs, Siemens and Schneider Drive.
• Detection and rectification of MV switchgear and LV including motors LT panels, VFD
drives.
• Responsible for keeping the electrical equipment in good working condition.
• Inspect electrical components, such as transformers and circuit breakers.
• Identify electrical problems with a variety of testing devices.
• Putting of electrical components in place either at centralized locations or at a site.
• Execute plans of electrical wiring for well-functioning lighting.
• Install safety and distribution components (e.g. switches, resistors, circuit-breaker panels
etc.).
• Prevent breakdown of systems by routinely inspecting and replacing old wiring and
insulated cables, cleaning circuits etc.
• Providing technical reports and documentation, according to company standards.
• Capable of preparing maintenance proposals and technical reports.

• Maintenance, repairing and troubleshooting of Residential and Commercial Buildings.
• Execute plans of electrical wiring for well-functioning lighting.
• Disconnection and removal of the existing cables, electrical control panels, light fittings
and associated electrical equipment and components for renewal.
• Fabrication and fixing of support brackets necessary for electrical installation.
• Installation of electrical wiring on board and do terminations as drawing provided.
• Selection and usage of basic electrical test equipment.
• Installation & termination of SEW drives, VFDs, Siemens, ABB and Schneider Drive.
• I have experience in the PV Solar system.
• Supervise the installation of solar photovoltaic (PV) systems, including wiring and
mechanical components.
• Diagnose and resolve technical issues related to solar systems and electrical components.
• Oversee the testing and commissioning of solar PV and grounding systems.
• Prepare and submit daily work execution reports, progress reports, and project status
updates to management.
• Lead, motivate, and coordinate installation crews, technicians, and subcontractors to
ensure efficient workflow and project completion.
• Assign tasks to crew members based on their skills and the needs of the project.
• Manage materials, equipment, and inventory on-site, verifying deliveries and reporting
shortages.

• Conduct the toolbox meetings wherever essential to ensure the safe execution of a job.
• Diagnosis and repair of breakdown equipment to ensure timely repair and back in service.
• Participate in the assigned plant Turnaround / shutdown activities and ensure timely
completion of jobs.
• Identification of areas for improvement in the activities performed and assists the senior
section personnel to carry out modifications and improvements to the system.
• Conduct the Preventive, breakdown maintenance and planned overhaul activities of
electrical equipment based on QA/QC procedures and centered reliability techniques.
• Access the task and ensure that the job is performed as per SOP and requirements
complete the maintenance activity sheet and closeout the Maximo work order.
• Isolation and connection/ disconnection of LV and HV machines and equipment.
• Gladding and Termination of power cables.
• Fabrication and fixing of support brackets necessary for electrical installation.
• Installation of industrial wiring distribution boxes, circuit breaker boxes etc.

• Conduct the Preventive, breakdown maintenance and planned overhaul activities of
electrical equipment based on QA/QC procedures and centered reliability techniques.
• Access the task and ensure that the job is performed as per SOP and requirements
complete the maintenance activity sheet and closeout the Maximo work order.
• Isolation and connection/ disconnection of LV and HV machines and equipment.
• Conduct the toolbox meetings wherever essential to ensure the safe execution of a job.
• Diagnosis and repair of breakdown equipment to ensure timely repair and back in service.
• Participate in the assigned plant Turnaround / shutdown activities and ensure timely
completion of jobs.
• Identification of areas for improvement in the activities performed and assists the senior
section personnel to carry out modifications and improvements to the system.
• Carry out visual inspection and vigilant to identify any developing problem in the area
assigned, and report to the relevant supervisor.
• Inspection and testing program of electrical hand tools and portable equipment.
• Emergency Response during blackout.
• Act independently in the field.
• Installation of industrial wiring distribution boxes, circuit breaker boxes etc.

• Identification of areas for improvement in the activities performed and assists the senior
section personnel to carry out modifications and improvements to the system.
• Inspection and testing program of electrical hand tools and portable equipment.
• Emergency Response during blackout.
• Gladding and Termination of power cables.
• Fabrication and fixing of support brackets necessary for electrical installation.
• Installation of industrial wiring distribution boxes, circuit breaker boxes etc.