SAFETY OFFICER
Rabban Readymix WLL
Total years of experience :27 years, 10 Months
SAFETY OFFICER
January 01, 2011 to November 12, 2013
Company: Rabban Readymix WLL (Concrete Supplier)
P.O. Box 45061
Doha, State of Qatar
Job Description: ➢ Works toward making a development of an incident and injury free workplace.
➢ Conducts induction on new employees.
➢ Arranges outside safety training for staff employees.
➢ Identifies, eliminate or control the hazards at workplace.
➢ Ensures the safety of all workers and facilities from potential hazards.
➢ Conducts site safety observation inspection at random and report to concerned personal.
➢ Ensures unsafe acts and unsafe conditions are reported and corrective actions taken.
➢ Responds to employees' safety concerns.
➢ Records and report all accident/incidents to its concern and take investigations.
➢ Presents Monthly HSE Performance Report to Management and Safety Representatives.
➢ Monitors and record environmental waste disposal, i.e. scrap batteries, waste and used oil, lubricant, waste water or any hazardous chemicals.
➢ Conducts monthly inspection on fire equipment and have it serviced as required.
➢ Assist site Managers to conduct tool box talks to its workers, if necessary.
➢ Conducts regular safety inspection on site.
➢ Attends client safety meetings and coordinate.
➢ Conducts a yearly fire emergency mock drill at worksites, offices, workshop and accommodations.
➢ Prepares method statement and risk assessment for any accident cases, if necessary.
➢ Prepares safety procedures for highly risk activities.
➢ Conducts a monthly fire extinguisher inspection and alarm testing once a month.
➢ Conducts internal safety audit and assist external audit surveillance.
➢ Prepares safety procedures for highly risk activities as required.
12. Fire Warden Course- March 26, 2011, Venture Gulf Training Centre, Doha, Qatar
16. ISO 9001:2000 Quality Systems Implementation Course - Nov. 11-12, 2003, Doha, Qatar
17. ASEP 7th International Convention on the Theme: "Structural Engineering: Facing The Challenge Of Economic Growth" - May 15-17, 1997, Manila, Philippines
1. Electrical Safety Awareness - November 13, 2012, Enertech Qatar, Doha, State of Qatar
2. IOSH Managing Safely Course - August 09, 2012, Enertech Qatar, Doha, State of Qatar
3. Safety Officer Course - Feb. 20, 2012, Doha Industrial Safety Services (DISS), Doha, Qatar
4. Level 3 Award In Health And Safety In The Workplace Training And Assessment Programme - January 20, 2012, DISS, Doha, State of Qatar
5. Level 2 Award In Fire Safety Principles Training And Assessment Programme - December 23, 2011, DISS, Doha, State of Qatar
6. Level 2 Award In Principles Of Risk Assessment - Dec. 02, 2011, DISS, Doha, Qatar
7. Level 2 Award In Environmental Principles And Best Practice Training And Assessment Programme - November 18, 2011, DISS, Doha, State of Qatar
8. NSC First Aid Course Standard - November 25, 2011, DISS, Doha, State of Qatar
9. NSC CPR Course (CPR and AED) - November 25, 2011, DISS, Doha, State of Qatar
10. IMS Internal Auditor Qualification Program- June 18-20, 2011, Doha, State of Qatar
15. Completed CBT Safety Training Courses and ILM Safety And Leadership Courses at PVTC, Shell Pearl GTL Project, Ras Laffan, State of Qatar - Oct. 2010 to Dec. 2010
TECHNICAL MANAGER
May 16, 2010 to December 31, 2010
Company: Rabban - Medgulf J.V. (Concrete Supplier)
Project: Shell - Pearl GTL Project
Ras Laffan, State of Qatar
Job Description: ➢ Ensures the concrete quality complies with the client standards and specifications.
➢ Monitors concrete slump/flow, concrete temperature, ambient temperature, fresh density, air content, cube sampling, concrete curing, sand moisture content, sieve analysis, soundness, chloride and sulphate content, 10 % fine values, aggregate crushing value, abrasion test, materials finer than 75 micron, clay lumps content, specific gravity and absorption ( all tests are conducted by Exova Technicians from external agency)
➢ Monitors chilled water temperature, water chemical analysis, cement physical and chemical test report, calibration of concrete batching plant and laboratory equipment, including compressive strength test and statistical analysis.
➢ Conducts site inspection for product conformity to the specs.
➢ Ensures that safety measures were observed by all lab personnel.
➢ Observes and follow the client's site safety rules and regulations.
MATERIALS ENGINEER
January 1, 2005 to May 15, 2010
Company: Rabban Ready Mix WLL (Concrete Supplier)
P.O. Box 45061
Doha, State of Qatar
Job Description: ➢ Conducts aggregate test base on British Standard such as for the sieve analysis, materials finer than 75 micron, loose and dry rodded aggregate unit weight, specific gravity, water absorption, particle shape (elongation and flakiness), 10% fines value, and sand moisture content as per Qatar Construction Spec's. (QCS)
➢ Monitors concrete slump/flow, ambient temperature, concrete and water temperature, air content, plastic density, yield, cube sampling, curing, and cube compressive test.
➢ Monitors and evaluate cube sample compressive strength test report at 3D, 7D, and 28D for statistical analysis.
➢ Prepares monthly test report for submission to clients.
➢ Conducts visual inspection of aggregates in the stock yard.
➢ Checks batch plant computer various inputs on concrete mix design if correctly entered.
➢ Checks the sand moisture content reading in the computer and in the panel board against the actual sand moisture content sample taken from the aggregate bin.
➢ Conducts plant and laboratory concrete trial mix of various design mix as per clients request.
➢ Checks cement, water, and chemical admixture from independent laboratory test reports.
➢ Monitors concrete durability test report conducted by independent laboratory personnel as per client requirement; such as Water Permeability as to DIN 1048, Rapid Chloride Permeability (RCP), and Chloride Migration Coefficient (CMT)
PRODUCTION ENGINEER
October 10, 2002 - December 31, 2004
Company: Khalid Cement Industries Complex (Concrete Supplier)
P.O. Box 3330, Street 41, Industrial City
Doha, State of Qatar
Job Description: ➢ Supervises foreman, plant operator, laboratory technicians, pump operators, mixer drivers and plant helpers regarding their daily works.
➢ Prepares daily pouring schedules.
➢ Monitors the flow operation of pump operators and mixer drivers.
➢ Checks plant mix design in-put and its chemical dosage being used.
➢ Checks daily sand moisture content.
➢ Checks concrete temperature, ambient temperature, and slump.
➢ Monitors site and laboratory concrete samples for 3d, 7d, and 28d compressive strength test for statistical analysis.
➢ Monitors the quality of aggregate, water, admixture and cement.
➢ Ensures that all delivery notes are submitted to accounts office.
➢ Assist in concrete trouble shootings.
➢ Monitors plant and vehicle cleanliness and maintenance.
➢ Monitors aggregate sieve analysis, specific gravity, water absorption, elongation index and flakiness index, and 10% fines value.
➢ Checks and evaluate statistical analysis of various concrete grades.
➢ Checks worker daily time sheet and overtime work.
➢ Coordinates with the foreman regarding the daily pouring schedules.
➢ Assist the needful requirement of labors, operators, and mixer drivers.
➢ Checks the client accounts prior to delivery, if in good term payment.
➢ Conducts plant and laboratory trial mixes for customer satisfaction and approval.
LABORATORY ENGINEER
July 8, 1999 - September 2002
Company: Dar Saba Najd Establishment (Concrete Supplier)
P.O. Box 641, Riyadh 11392
Kingdom of Saudi Arabia
Job Description: ➢ Prepares mix design and trial-mixes for concrete grade C 40, C 35, C 30 and C 20 as per Saudi Government requirement and specifications.
➢ Conducts test on aggregate samples such as sieve analysis, percent passing sieve no. 200, fineness modulus, moisture content, clay lump and friable particles, specific gravity & absorption, dry-rodded and loose unit weight, aggregate blending proportions.
➢ Sends aggregate materials to independent testing laboratory for quality test such as aggregate flakiness & elongation, soundness of aggregate, abrasion test by Los Angeles machine, sand equivalent, time setting of concrete, organic impurities, chlorides and sulfates content, potential alkali reactivity, petrographic examination, and water chemical analysis.
➢ Checks and monitor fresh concrete workability, temperature, curing, compressive strength, density, air content, re-dosing, and concrete yield.
➢ Checks statistical analysis of concrete cube strength test results.
➢ Measures the actual site concrete volume if there is any complaint of volume discrepancy between supplier and client.
➢ Conducts Schmidt rebound hammer test as a preliminary investigation test if there is any doubt of low concrete strength prior to coring test.
QC SUPERVISOR
March 10, 1997 - April 30, 1998
Company: Unicon-Phinma Concrete Corporation (Concrete Supplier)
164 Salcedo St., Legaspi Village, Makati City, Philippines
Job Description: ➢ Assigns technician to their respective jobsites in order to check and monitor deliveries of concrete, its workability, and make concrete samples for strength test.
➢ Monitors concrete slump, temperature, flexural and compressive strength.
➢ Monitors aggregate sieve analysis, loose and dry-rodded unit weights, fineness modulus, origin, specific gravity and absorption.
➢ Checks concrete statistical analysis on coefficient of variation, standard deviation, and mean strength.
➢ Monitors stock of aggregates, OPC, SRC, Fly Ash, Silica, and chemical admixtures.
➢ Conducts rebound hammer testing, core drilling, capping, and compressive strength test for low strength test.
CONSTRUCTION MANAGER
18. PICE Continuing Professional Education Program on the Theme: "Prime Focus On Professional Development And State Of The Art Engineering" - April 25-26, 1997, Makati Sports Club, Alfaro cor. Gallardo St., Makati City, Manila, Philippines
July 3, 1990 - June 30, 1995
Company: R.T. Benitez Construction (Single Proprietor Contractor)
Tacloban City, Philippines
Job Description: ➢ Enters bidding to Government agencies.
➢ Conducts site inspection prior to bidding.
➢ Prepares program of work (PERT/CPM), manpower and equipment schedule, and project cost estimates.
➢ Secures business permits for contract agreement.
➢ Conduct joint inspection for billing and turn-over of project, and clearances for final billing and collection.
➢ Monitors and purchases construction materials for site distribution.
➢ Monitors manpower performance, attendance, and safety.
➢ Supervises site works as to project plans and specifications.
19. PICE Mid-Year Convention on the Theme: "Civil Engineers as Partners in Socio-Economic Recovery" - June 24-26, 1993, DPWH, Tacloban City, Leyte, Philippines
20. La Mesa Filter Plant Operation Course - September 7-18, 1981, Metropolitan Waterworks and Sewerage System (MWSS), Diliman, Quezon City, Philippines
21. MWSS 5th Cadet Engineers Training Program - July 15 to October 27, 1981, Metropolitan Waterworks and Sewerage System, Diliman, Quezon City, Philippines
I hereby certify that the information given above are true and correct to the best of my knowledge and ability.
Applicant
ASSISTANT SUPERINTENDENT
March 1988 - May 1988
Company: G.I.T. (Waterproofing Specialist)
Dubai, United Arab Emirates
Job Description: ➢ Prepares daily activities and deploy manpower to jobsite.
➢ Waterproof roofs using application of polyurethane foam.
➢ Applies hot felt waterproofing membrane.
➢ Apply reflective paints or colored flakes on waterproof membrane.
➢ Rubberize tennis court floorings.
➢ Reports daily accomplishment to the management.
MATERIALS ENGINEER
August 1985 - March 1988
Company: Al Hamra Engineering Company (Waterproofing Specialist)
Sharjah, United Arab Emirates
Job Description: ➢ Prepares cost estimate, quotation and contract with clients.
➢ Prepares detailed drawings and apply waterfroofing works using Holland Eshagum hot & cold applied membrane, eshakote, esha primer, light weight foam concrete, Sika PVC felt membrane, Sika tiles, Rubberoid PVC felt membrane, Rubberoid elastomeric membrane, Vandex super white waterproofing cement. Installs rigid polyurethane insulation, Roofmate insulation, vapor barrier, bitu-thane damp proof membrane, aluminum flashing works, joint sealant, and Trocal roof waterproofing sheet products.
➢ Conducts water leak test prior to turn-over of project works and billings.
MATERIALS ENGINEER
October 1982 - September 1983
Company: Al-Dakheel Construction Corporation
Project: Medina-Yanbu Diversion Road Project
Kingdom of Saudi Arabia
Job Description: ➢ Prepares program of work (PERT/CPM), design drawings details, cost estimates, manpower and materials schedule, daily activities, materials testing, and monthly payment certificates.
➢ Requests site inspection and pouring schedule prior to concrete pouring.
➢ Supervises concrete box culvert construction, formworks, steelworks, concrete sampling, curing, and concrete strength test.
JUNIOR ENGINEER
July 1981 - October 1982
Company: Metropolitan Waterworks & Sewerage System
Diliman, Quezon City, Philippines
Project: PG-5, Quezon City & Pasig Reservoir Project
Special Project of Camp Dresser & Mckee
Job Description: ➢ Conducts quality test for steel bars, concrete compression and flexural test.
➢ Conducts aggregate sampling and testing such as the concrete slump, concrete temperature, aggregate unit weight, and sieve analysis.
➢ Blends aggregate stockpiles, reduce aggregate temperature by sprinkling water.
➢ Uses crushed ice blocks to correct concrete temperature and add cement to control concrete slump prior to pouring.
PROJECT ENGINEER
August 1980 - July 1981
Company: JBB Construction & Development Corp.
Timog Ave., Quezon City, Philippines
Project: NHA Project at Tatalon Estate, Quezon City and
NHA Project at Hulo Estate, Mandaluyong City
Job Description: ➢ Supervises project implementation, daily manpower and equipment activities.
➢ Conducts joint site inspection with government representatives and prepare payment certificate for billing.
➢ Conducts materials sampling and testing.
ENGINEER IN-CHARGE on SOIL & MATERIAL TESTING
July 1979 - July 1980
Company: PHILROAD Construction Corp.
Philippine Village Hotel, Paranaque City
Project: Widening of EDSA Road from Guadalupe to Mantrade,
Concreting of Sucat Road and Novaliches Road Projects
Job Description: ➢ Supervises soil stabilization using lime and polymer including cement base preparation and conventional method of road compaction.
➢ Conducts nuclear field density test, material sampling and testing.
➢ Applies curing compound or water ponding method on pavement.
➢ Prepares monthly testing certificate for billing.
TRAININGS / SEMINARS ATTENDED: