Richard Anaetoh

 Plan, Organise and Coordinate all offshore/onshore installation activities from pre-fabrication to commissioning level. Supervision, manage and evaluate project needs, timeframes, and costs for the project.

 Provide all method statement/site installation procedure for all the offshore Piping/Structural Installation work.
 Interview, select, and maintain an effective work force and recommend solutions and changes for improving service levels.

 Responsible for all site piping engineering activities. Prior to deployment to site, coordinate and supervise sub-contractor’s workshop fabrication (piping/structures) ensure that fabrication are done in accordance to AFC drawings and standard. Ensure that engineering problems at source are resolved. I was required to liaise at site with the sub-contractors engineering personnel and to co-ordinate piping installation with relevant supervisors.


 Involve in site visit survey inspection and preparation of site installation procedure/work pack.

 Preparation of daily site progress report/WBS.

 Checking the Welding Activities is in Compliance with Applicable Code, Standard & Specification and also Checking that the Welding Procedure to be used are approved and duly qualified as required.
 Prepare a QA/QC Manual and Procedures covering all key quality activities for the Project and follow up all review. Implement all comments during review with respect to approval.

 Involved in the qualification of Welding Procedures, PQR and Welders to ASME Sec.IX.

 Inspection of incoming materials and review of the Material Certificates to ASTM & DIN Specifications.

 Inspection during fabrication of piping to ASME B 31.3 Specifications and other relevant codes as per requested by Client.

 Monitoring compliance with job specifications and ensuring proper use of materials.

 Carrying out visual inspection of welds, NDT and interpretation of results besides verifying the conformance of dimensions fit-up and weld preparation to requirements. Further ensure the correctness of welding consumables and the storage of filler materials.

 Holds dual responsibility for performing welding and NDT works.
 Supervision of all Post Weld Heat Treatment activities during fabrication.

 Compile and issue weekly and monthly project progress reports, as well as other reports as required by the Project.

 Plan, Organise and Supervision of coating/Painting of prefabricated spools/welded joints.

 Precommissioning checks, Pre-start checks, Pneumatic, Hydro testing and Flushing of all Piping Installed.

 Review all documentation generated during fabrication and ensure that obsolete drawings for fabrication are not issued.

 Preparation of updated spool (weld) Summary Report, Material Traceability Record and Spool Released Request form of all the completed spools.
 Follow up on all dimensional control both yard fabrication and offshore installation.

 Generating necessary reports and maintaining records of the same.

 Also follow up on all the construction work associated with corroded spool replacement both onshore/offshore & preparation of related reports.
 Preparation of As-Built documentation.

 Plan, Organise and Coordinate all offshore/onshore installation activities from pre-fabrication to commissioning level. Supervision, manage and evaluate project needs, timeframes, and costs for the project.

 Provide all method statement/site installation procedure for all the offshore Piping/Structural Installation work.
 Interview, select, and maintain an effective work force and recommend solutions and changes for improving service levels.

 Responsible for all site piping engineering activities. Prior to deployment to site, coordinate and supervise sub-contractor’s workshop fabrication (piping/structures) ensure that fabrication are done in accordance to AFC drawings and standard. Ensure that engineering problems at source are resolved. I was required to liaise at site with the sub-contractors engineering personnel and to co-ordinate piping installation with relevant supervisors.


 Involve in site visit survey inspection and preparation of site installation procedure/work pack.

 Preparation of daily site progress report/WBS.

 Checking the Welding Activities is in Compliance with Applicable Code, Standard & Specification and also Checking that the Welding Procedure to be used are approved and duly qualified as required.
 Prepare a QA/QC Manual and Procedures covering all key quality activities for the Project and follow up all review. Implement all comments during review with respect to approval.

 Involved in the qualification of Welding Procedures, PQR and Welders to ASME Sec.IX.

 Inspection of incoming materials and review of the Material Certificates to ASTM & DIN Specifications.

 Inspection during fabrication of piping to ASME B 31.3 Specifications and other relevant codes as per requested by Client.

 Monitoring compliance with job specifications and ensuring proper use of materials.

 Carrying out visual inspection of welds, NDT and interpretation of results besides verifying the conformance of dimensions fit-up and weld preparation to requirements. Further ensure the correctness of welding consumables and the storage of filler materials.

 Holds dual responsibility for performing welding and NDT works.
 Supervision of all Post Weld Heat Treatment activities during fabrication.

 Compile and issue weekly and monthly project progress reports, as well as other reports as required by the Project.

 Plan, Organise and Supervision of coating/Painting of prefabricated spools/welded joints.

 Precommissioning checks, Pre-start checks, Pneumatic, Hydro testing and Flushing of all Piping Installed.

 Review all documentation generated during fabrication and ensure that obsolete drawings for fabrication are not issued.

 Preparation of updated spool (weld) Summary Report, Material Traceability Record and Spool Released Request form of all the completed spools.
 Follow up on all dimensional control both yard fabrication and offshore installation.

 Generating necessary reports and maintaining records of the same.

 Also follow up on all the construction work associated with corroded spool replacement both onshore/offshore & preparation of related reports.
 Preparation of As-Built documentation.

PROJECT NAME: OML 123 INTEGRATED FACILITY UPGRADE(TOPSIDE)
ORON W-S PLATFORM (ADDAX FIELD).
8” WATER INJECTION PIPELAYING (ORON WS PLATFORM TO ADSI
PLATFORM).
RISER INSTALLATIONS AND JACKET LEG ANODE INSTALLATIONS
OFFSHORE
* Provide Piping and Facilities Engineering Support to Construction and
topside Equipment Installation Team.
* Providing effective planning/scheduling functions on projects in
accordance with Clients/company policies procedures, specifications, and
project baseline.
* Monitoring, controlling, and tracking of all project variables resources, cost,
time, scope, and quality of deliverables to ensure that the team is making
satisfactory progress to the project goals.
* Interfacing with clients, attending regular meetings, and giving reports on
project progress.
* Ensures that all As Built, Closeout/Weld history documentations were
completed on schedule.
* To assist Senior Project Engineer to carry out Front-End Engineering
through to commissioning with the objective to execute all projects safely,
on time and within budget.
* Document control and drawing transmittal were also site-based functions,
which came under the remit of the Construction Engineer.
* Generating necessary reports and maintaining records of the same for the
project.
* Monitoring/inspection and control of fit-up, weld production, NDT of
various classes and material audit/control on the 8” Water Injection Pipe
laying.
* Interpretation of various mechanical drawings and NDT reports.
* Ensure conformance with the approved procedures/planning and
establishing inspection coordination.
* Supervision of WPS qualification for various classes.
* Liaising with the Client Rep on the modifications/progress of the work and
follow up.
* Follow up logistics and operations associated with the project.
* Supervision and monitoring of all construction/installation works at Oron
WS Platform (OFFSHORE - TOPSIDES) which includes the following:
• Anode installation on the 6 CP’s
• Boat landing installation on CP B1.
• Pipe system installation (riser clamp, 8” riser spool fabrication and 4”/10”
riser spool modification)
• Topside module load out/Transportation.
• Topside installation + Escape ladder.
• Laying of 8” water injection pipeline from Oron WS platform to ADSI.
• Extra works: Modification on the platform facilities.
• Ascertaining correct installation of shrink sleeves and anode plate as well
as ensuring compliance to projects quality plans and specifications.
* Also worked as Acting Barge Superintendent in absence of Barge
Superintendent.
* Ensure project execution is in accordance to design, quality policy
specification, procedure and project drawings are approved for
construction.
ONSHORE
* Responsible for all site piping engineering activities. Prior to deployment to
site, I was located at the piping sub-contractors workshop to oversee the
spool fabrication and to solve engineering problems at source. I was
required to liaise at site with the sub-contractors engineering personnel and
to co-ordinate piping installation with relevant supervisors.
* Evaluate, Monitor and Coordinate Engineering progress and Performance,
Execution strategy, work Schedule Impacts and Deviations, Contracts
execution strategy planning, manage interface with Clients, vendors, and
subcontractors, Maintain constant communication with Clients as need
arises.
* Taking overall responsibility for reporting and planning all projects.
* Ensure conformance with the approved procedures/planning and
establishing inspection coordination.

PROJECT NAME: EPC FOR 24" GAS PIPELINE FOR SWAMP AREA GAS
GATHERING PROJECT OB-OB (NAOC PROJECT).
* Project planning/Scheduling, administering, monitoring and developing
reports to Project management using Project planning Software.
* Collation of all relevant data for Cost control purpose with respect to
actual hours for work stoppage, Equipment status and Man-hours.
* Design, programming and implementation of project man-hour and cost
tracking I reporting and forecasting systems
* Budget and schedule risk analysis studies. Development of Integrated cost
and planning systems.
* Preparation of progress forecasts using Primavera Software (rev. 5).
* The monitoring and update of progress for all activity for the Project.
* Identifying and analyzing variance (data, resources/cost etc) for the Project.

PROJECT NAME: FORCADOS YOKRI INTEGRATED PROJECT
(ONSHORE).
* Inspection of fabrication and welding works in the project covering
pressure piping in accordance with section IX, API 1104, ASMESEC-V
, Standards and approved quality control plan and inspection, test &plan in
pipeline/plan job.
* Complete accurate visual and dimensional inspections on fit up/welded
parts and check components to confirm compliance with customer part
welding specifications and quality standards.
* Review ITP of project, PQR and welding procedures to guide production
and welding personnel relating to specification restrictions, material
processes, pre- and post-heating requirements.
* Inspection of pipes, fittings, valves with regards to the actual tractability
against manufactures Certificate.
* Evaluate new developments in welding field for possible application to
current welding problems or production processes. Execute basic
calculations pertaining to inspection requirements.
* Inspect the finished work to determine its compliance with regulations
governing construction.
* Prepare a daily log of construction and inspection activities as well as
maintain reports and records.
* Coordinate staff on site to solve problems; assist same for smooth
progression of work on site.
* Monitor work in progress in order to ensure that the procedures
implemented and materials utilized conform to the contract documents and
applicable codes.
* Preparation of Welded Joints (Welds) free from defects for Post Weld Heat
Treatment (PWHT) as per isometric drawing/specification.
* Piping spool inspection - dimensional checks of fabricated spools as per
isometric drawing and material traceability.
* Inspection of painting and sand blasting work/documentation.
* Preparation and review of the Heat Treatment Plan/Record in accordance
with the Client Quality Plan.
* Verifying the Heat operations and sign off on the Heat Treatment Record
and Charts.
* Review all documentation generated during fabrication and ensure that
obsolete drawings for fabrication are not issued.
* Follow-up of all the welding process and ensure that welding is in
accordance with approved welding procedure specification and performed
by qualified welder only.
* Preparation of updated spool (weld) Summary Report, Material Traceability
Record and Spool Released Request form of all the completed spools.

* Mobilization of Equipment Materials and Personnel to Project Sites.
* Piping spool inspection - dimensional check of fabricated spools as
per isometric drawings.
* Monitoring of movement of materials/materials audit and control
* Relate with Projects and Maintenance Department on the deployment
of Equipments.
* Keep updated Record of Company Equipments.
* Liased with Maintenance Department for any maintenance work
required for Equipments at Site.
* Follow up of various Projects request and supplies.
* Preparation of updated Operations daily/monthly progress reports on
Projects.
* Identification and tagging of completed Spools.

* OML 58 OFS PRESSURE VESSELS CLEANING AND PREPARATION FOR
INTRUSIVE INSPECTION
* OML 99 SECTIONAL REPLACEMENT OF 16’’ HP CRUDE EXPORT LINE AT
AMD1/D2. PROJECT STATUS: COMPLETED
* OML 99 REPAIR OF 46 GX-731 A/B/C DISCHARGE PUMP SPOOL. PROJECT