الحد الأقصى لحجم ملف التحميل: 3MB أنواع الملفات المسموح بها: jpg, jpeg, gif فقط

اضغط على زر البحث، قم باختيار صورة معينة، ثم اضغط على حفظ الصورة
المبادئ التوجيهية
  1. قم بتحميل صورة لنفسك فقط.
  2. سيتم رفض صور الأطفال أو المشاهير أو الحيوانات أو صور الشخصيات الكرتونية.
  3. سيتم رفض الصور التي تحتوي على عري أو الصور العنيفة وقد تؤدي تلك الصور إلى إلغاء حسابك الخاص.
  4. سيتم رفض صورة جواز السفر أو صورة عن بطاقة الهوية أو تلك التي تحتوي على أي معلومات شخصية مثل عنوانك ورقم جواز السفر، أو أرقام الاتصال الخاصة بك وذلك من أجل أمنك الشخصي.

المبادئ التوجيهية

Riyaz Ahmed Khan

Project Engineer

Zuhair Fayez Partnership Consultants

البلد:
المملكة العربية السعودية - جدة
التعليم:
بكالوريوس, Mechanical engineering
الخبرة:
16 سنة, 7 أشهر

الخبرة العملية

ما هي خبرتك المهنية؟ في الواقع، إن الخبرة المهنية هي من أهم أقسام سيرتك الذاتية.
يمكنك ذكر كافة مهاراتك والمسؤوليات، والمشاريع والإنجازات التي قمت بها في كل دور وظيفي. إن كنت قد تخرجت مؤخراً، يمكنك إضافة الأعمال التطوعية أو فترات التدريب التي قمت بها.
إضافة الخبرة

مجموع سنوات الخبرة:  16 سنوات, 7 أشهر   

أغسطس 2010 إلى حتى الآن

Project Engineer

في Zuhair Fayez Partnership Consultants
البلد : المملكة العربية السعودية - جدة
Main responsibilities include reviewing design & shop drawings, calculations & material
submittals of the project for approvals to match with specs and standards including with
pre-qualification of sub-contractors and simultaneously supervising, inspecting & testing
the mechanical systems.

Scope of work (SOW) includes but not limited to design & review for HVAC system: Heat
load calculations, Ventilation calculations, External static pressure calculations, Duct sizing,
Smoke management systems, Chilled water pipe sizing, Chilled water pumps flow and head
calculations based on applications.

Plumbing System and Irrigation system Calculations which includes pump head calculation,
Pipe sizing and Selection of pumps as per codes & project specifications.

Firefighting system calculation which includes hydraulic calculation, head/head loss
calculation, pipe sizing, distribution of sprinklers, fire hose cabinets & selection of pumps
in compliance with NFPA & civil defense requirements.

To Ensure the implementation of all design requirements during construction, as per work
scopes, engineered drawings, specification and standards including ASHRAE, SMACNA,
NFPA, UPC, NPC, IPC and SASO.

Inspection of all related works as per quality management forms and requests in compliance
with standards which includes but not limited to HVAC equipment's, ducting works, piping
works, Water supply equipment, piping & treatment works, Sewage & storm water system,
Fire sprinkler systems, LPG systems, Building Management system (BMS) etc.

Performing Inspections of material delivered at site & approvals in line with quantities and
bills as per tender B.O.Q's.

Coordinate the development of non-conformance report for quality issues identified during
construction phase and monitor the construction progress inline with on-site health & safety
implementations to ensure the alignment in accordance with project schedule.

Provide technical support for request for proposals, contracts, specification, preliminaries
and variation.

Record changes on site and review mark-up drawings/As-built drawings.

To act as interface between construction contractor and client. Updating project progress to
the client thru complete reports and documentation.

Works with project management team to resolve issues/comments.

Weekly meetings with contractors for any technical issues, project progress schedules,
quality & cost controls and deliveries.

Reviewing and approving testing and commissioning of all systems and issuing handing
over certification with all deliverable.

Assist the discipline staff on projects in resolving any technical issues, claims, disputes
arising and requiring input for satisfactory close out.

Projects:
1. Public Realm Uplifting of Al Dahab Square in Jeddah Historic District. (Present Project - Jeddah).
2. King Abdul Aziz University (KAAU - Rabigh).
3. STC Warehouses. (Jeddah, Madinah, Dammam)
4. Maad Towers. (Makkah)
5. American School Residential Compound & Sara Housing Compound (Jeddah).
6. Al Haramain Complex(Jeddah)
7. Hani Attas beach house (jeddah).
8. Al Rajhi Banks. (Abha, Khamis Mushait, Gizan & Farasan Island)
9. King Abdullah Foundation project for Immigrants Housing, (Gizan )
فبراير 2008 إلى فبراير 2010

Mechanical Engineer

في Innovative Electromechanical L.L.C
البلد : الإمارات العربية المتحدة - دبي
Reviewing contractual documents (specifications), doing take offs & procurement,
preparing BOQ’s Plans for Sending inquiries, preparing material submittals & shop
drawing, submitting & getting approvals. Preparing cost analysis for various projects.

Coordination with equipment suppliers etc. Preparation of contract documents with
suppliers & end clients.

Follow ups of commencement of work on site along with its progress & simultaneously
updating manager with complete reports.

Site supervision & maintaining work schedule sheet on project basis & reporting to
authorities. Preparation of percentage of completed works on site for invoicing.

Providing complete technical detail to site staff for easy and smooth execution of project.

Handing over of the projects after proper testing & commissioning.

Actively involved in generating business & getting new projects thru marketing for the
company covering all electro-mechanical projects including AC maintenance contracts from
hotels, commercial buildings & villas.

Projects involved:
1. HVAC works for Glass House Hilton Dubai Creek.
2. Complete HVAC Systems for private villa in Mankhool.
3. AHU and associated ducting works for Aujan Industries.
4. Water purification system utilizing UV lamps in Shangri-La Hotel.
5. Chilled water system works for H.E Humaid Bin Al Tayer Villa.
6. Chilled water system work for Dubai Marine Hotel.

التعليم

ما هي خلفيتك التعليمية؟
اسمح لأصحاب العمل بالإطلاع على المزيد حول خلفيتك التعليمية. كن واضحاً ومختصراً.
مايو 2006

بكالوريوس, Mechanical engineering

في Jawaharlal Nehru Technological University
البلد : الهند - حيدر اباد
المعدل: 67 من 100

Specialties & Skills

COMPUTER HARDWARE

CONCEPT DEVELOPMENT

CONTRACT MANAGEMENT

COST ANALYSIS

CUSTOMER RELATIONS

MS-Office- Word, Excel, Power point

HAP Software

Elite Software

Duct & Pipe Sizers

DOCUMENTATION

Plumbing

fire fighting

اللغات

كم من لغّة في رصيدك؟
إن تكلم لغات متعددة من الأمور الأساسية في بعض الوظائف لذا عليك إضافة المهارات اللغوية من أجل تحقيق نتائج أفضل.

العربية

متمرّس

الانجليزية

متمرّس

الهندية

متمرّس

الأوردو

متمرّس

العضويات

هل أنت من أعضاء أي جمعية أو نادي مهني؟
عليك إضافة العضويات المهنية إذ أنها تظهر تطلعاتك المهنية.
المؤسسة : Saudi Engineering Council
العضوية/الدور : Mechanical Engineer
عضو منذ : June 2015

تحميل
تحميل...
تحميل...