Rolando Caguioa

Autocad Operator / Draftsman·Contracting & Constructions Enterprises LTD.

الفلبين

الثانوية العامة أو ما يعادلها, Architectural Drafting

الخبرة العملية

مجموع سنوات الخبرة: 21 سنوات, 4 أشهر

Autocad Operator / Draftsman

أكتوبر 2013 - أكتوبر 2016

Contracting & Constructions Enterprises LTD.

الرياض، المملكة العربية السعودية

وجدت هذه الوظيفة عبر بيت.كوم

أكتوبر 2013 - أكتوبر 2016

• Prepared Electrical shop drawings in accordance with the schedule of submittals as directed by the project by the project coordinator.
I. Detailed Electrical & Instrument Cable Layouts, Sections, Isometric.
II. Earthing layout, Single line diagrams, Lighting layouts, Power layouts, CCTV, Systems, Fire Alarm System, IntegratedSecurity Systems, Voice Evacuation System, Car Management system, Telephone, Building Management, AV Systemand Data Voice & KNX (EIB) System Layout.
III. Lightning Protection, Grounding system, Electrical Room Details, Low Current Riser Diagrams, Communication Room Details &A/V Room Details, Data Cabinet Layout, Cable Tray Routing and Trunking Layouts.
• Prepared Electrical As Built Schedule.
• Coordinate to electrical engineer and foreman for As-built drawing preparation.

مجال الشركة:: البناء والتشييد
الدور الوظيفي:: التشييد والبناء

Autocad Operator Electrical

يوليو 2012 - يناير 2013

Ramco/Samko International Co.W.L.L

الدوحة، قطر

وجدت هذه الوظيفة عبر بيت.كوم

يوليو 2012 - يناير 2013

• Assisted in Electrical Engineer for preparation
Shop drawing of electrical system and details
• Responsible for doing the CCTV Layout, CCTV
Manhole, CCTV-Piping Layout and Fiber Cable
with 3Cx4mm² wire to External ground Floor
Plan
• Do dimensioning CCTV-Pipes Layout, CCTV-
Manhole and the final CCTV- External
Coordination.
• Preparing of electrical revised plan from the
engineer
• Coordinate to Electrical Engineer and Foreman
for preparing As-Built Drawings.

مجال الشركة:: البناء والتشييد
الدور الوظيفي:: الهندسة

Autocad Operator Electrical

أكتوبر 2011 - أبريل 2012

Powergear, Inc.

Manila، الفلبين

أكتوبر 2011 - أبريل 2012

• Assisted to mechanical Engineer for preparation Shop drawing of Genset plan such as generator front, side, top view with layout exhaust pipe, muffler, Radiator ducting & Fuel day tank.
• Preparing of Mechanical plan drawing for mechanical permit to genset installation such as Genset floor plan, structural plan, Site Development plan, Vicinity map, Genset specification and fuel day tank details.
• Produce of shop drawing request thru email by Project in charge for genset installation.
• Produce of shop drawing fabrication for genset installation.
• Preparing of Mechanical genset As-built plan for permit requirement.

مجال الشركة:: التصنيع
الدور الوظيفي:: الهندسة

Autocad Draftsman

يوليو 2007 - مايو 2010

Qatari Arabian Construction Co.

الدوحة، قطر

وجدت هذه الوظيفة عبر بيت.كوم

يوليو 2007 - مايو 2010

• Assisted in Structural Engineer for preparation shop drawing of structural plans and details of
Layout bars such as slab, staircase, corewall and pile.
• Assisted in Electrical Engineer for preparation Shop drawing of electrical system and details.
• Preparing of structural & electrical revised plan from the engineer and redraw it with editing.
• Coordinate to Electrical Engineer and Foreman for preparing As-Built Drawings.

مجال الشركة:: البناء والتشييد
الدور الوظيفي:: الهندسة

Autocad Operator

يناير 2005 - يناير 2007

Electrical Abdullah Al-Shuwayer Trading Co

الإمارات العربية المتحدة

وجدت هذه الوظيفة عبر بيت.كوم

يناير 2005 - يناير 2007

• preparation of shop drawings panel board of enclosure such as MDP, Unitized Panel, N1 & N3R Enclosure'
• Produce shop drawings of wiring diagram from engineer design and attached to panelboard.
• Preparing As-built panel board dwg. and coordinate to engineer and foreman.

مجال الشركة:: التصنيع
الدور الوظيفي:: الهندسة

Electrical Panel

يناير 2002 - يناير 2005

Electrical Total Power Box Solution Inc

Manila، الفلبين

وجدت هذه الوظيفة عبر بيت.كوم

يناير 2002 - يناير 2005

• Assisted in Production engineering for preparation of shop drawings panel board of enclosure such as MTS, ATS, GCP, MCC, MDP, LVSG, Unitized Panel, N1&N3REnclosureand Cable Tray.
• Produce shop drawings Fabrication such as cuttings schedules layout of panelboard sheets.
such as Body frame, top, bottom and front cover.
• Produce shop drawings Fabrication of cuttings schedules Busbars layout.
• Produce shop drawings of wiring diagram from engineer design and attached to panelboard.
• Preparing As-built panel board dwg. and coordinate to engineer and foreman.

مجال الشركة:: التصنيع
الدور الوظيفي:: الهندسة

Draftsman

يناير 1991 - يناير 2000

Electrical Integrated Electrical Control Corporation

Manila، الفلبين

وجدت هذه الوظيفة عبر بيت.كوم

يناير 1991 - يناير 2000

• Assisted in Production Manager for preparation of shop drawings panel board of enclosure such as MTS, ATS, GCP, MCC, MDP, LVSG, Unitized Panel, N1&N3REnclosureand Cable Tray.
• Produce shop drawings Fabrication such as cuttings schedules layout of panelboard sheets.
such as Body frame, top, bottom and front cover.
• Produce shop drawings Fabrication of cuttings schedules Busbars layout.
• Produce shop drawings of wiring diagram from engineer design and attached to panelboard.
• Preparing As-built panel board dwg. and coordinate to engineer and foreman.

مجال الشركة:: التصنيع
الدور الوظيفي:: التصنيع

التعليم

Technology,Guzman Institute Of Technology

مايو 1982

الثانوية العامة أو ما يعادلها، Architectural Drafting

الفلبين

1. Architectural Plan 2. Structural Plan 3. Electrical Plan 4. Plumbing / Sanitary Plan 5. Mechanical Plan

Skills

CAD

Intermediate

PRIME

Beginner

AUTOCAD

Intermediate

MECHANICAL

Intermediate

MERIDIAN

Beginner

BASIC

Beginner

CABLING

Beginner

COM

Beginner

EDITING

Beginner

ELECTRICIAN

Beginner

اللغات

الانجليزية

متوسط

التدريب و الشهادات

التدريب

AutocadTraining

CAD Vision Engineering Techlnogies ,Recto, Manila, Philippines

Oct 2001

الأشخاص شاهدوا أيضاً

Musaddiq Amin

Management Consultant
Tecno

aila mesina

SALES COORDINATOR

Sami-Us-Shan Alvi

Senior Procurement & Logistics Supervisor
(Jeddah Islamic Port- JIP) JEDDAH (AB TECH Information & Technology Co)

Sana Al-Hindi

Boutique Manager
Piaget Jewelry & Watches, Jeddah – Al-Khayyat Center

Ahmad Ba-azeem

مدير موارد بشرية
لايوجد

Rolando Caguioa

مشاركة سيرتي الذاتية

الخبرة العملية

Autocad Operator / Draftsman

Autocad Operator Electrical

Autocad Operator Electrical

Autocad Draftsman

Autocad Operator

Electrical Panel

Draftsman

التعليم

Technology,Guzman Institute Of Technology

Skills

اللغات

الانجليزية

التدريب و الشهادات

التدريب

AutocadTraining