Sabarish kumar

• Once we got the project we need to conduct kick off meeting with client.
• We need to get 100% DEP from the designing team, and then need to start preparing MARs.
• After that start placing PR & PO to LLI.
• We are using different type of materials in this project like P11, SS321 & CS.
• We contact supplier to arrange materials on time to work.
• We need to perform PWHT activity in P11 materials.
• We need to demolize the existing foundation & paving area to replace new foundations for
installing spring supprts.
• We need to errect Scaffolding to install the piping job.
• Performed hydrotesting Activity for pipelines & R.T Conducted for weld joints.
• After completing the hydrotest we flushing (Air blowing) total line in before commisiong.
• Conducted walk through with client after finishing the project.
• After finishing punch list and handover to client.
• We prepare MAR to get approval with client, Make P.R & P.O for material purchasing.
• We contact supplier to arrange materials on time to work.
• Performed hydrotesting Activity for pipelines & R.T Conducted for weld joints.
• Conducted walk through with client after finishing the project.
• After finishing punch list and handover to client.

Role & Responsibility:
• Once we got the project we need to conduct kick off meeting with client.
• We need to get 100% DEP from the designing team, and then need to start preparing MARs.
• After that start placing PR & PO to LLI.
• We need to install 24nos ON/OFF control valve at existing line.
• For that we want to modify the existing line as per IFC.
• We need to errect Scaffolding to install the piping and 24 nos ON/OFF control valve job.
• Performed hydrotesting Activity for pipelines & R.T Conducted for weld joints.
• After completing the hydrotest we flushing (Air blowing) total line in before commisiong.
• Conducted walk through with client after finishing the project.
• After finishing punch list and handover to client.

Role & Responsibility:
• Demolization of old DG set & Radiator unit & replacement for new DG set & Radiator installation,
Glanding & Termination Activty.
• We prepare MAR to get approval with client, Make P.R & P.O for material purchasing.
• Performed hydrotesting Activity for pipelines & R.T Conducted for weld joints.
• Conducted walk through with client after finishing the project.
• After finishing punch list and handover to client.

• Installation of furnace Chamber, MLI & Drain line Activity for all 8 nos Steam Drums.
• Everyday meet client meeting we give status report from the project.
• We prepare MAR to get approval with client, Make P.R & P.O for material purchasing.
• We contact supplier to arrange materials on time to work.
• Performed hydrotesting Activity for pipelines & R.T Conducted for weld joints.
• Conducted walk through with client after finishing the project.
• After finishing punch list and handover to client.

Role Responsibility:
• Pipeline and Piping Operations: Comprehensive knowledge of pipeline and piping systems,
including installation, maintenance, inspection, and repair procedures in the oil and gas industry.
• Team Leadership: Proven ability to lead and supervise teams of technicians and tradespeople,
fostering a collaborative and productive work environment.
• Project Management: Proficient in planning, organizing, and executing pipeline projects, ensuring
adherence to schedules, budgets, and quality standards.
• Safety and Compliance: Deep understanding of safety regulations and protocols within the oil and
gas industry, ensuring compliance with industry standards and promoting a safe work environment.
• Equipment and Material Management: Skilled in coordinating equipment and material
procurement, inventory management, and ensuring availability for project needs.
• Troubleshooting and Problem-Solving: Strong analytical and problem-solving abilities to identify
and resolve issues in pipeline and piping systems efficiently.
• Communication and Collaboration: Excellent interpersonal and communication skills, facilitating
effective collaboration with stakeholders, clients, and team members.

Roles and Responsibilities:
• Conducting gas test in proper intervals.
• Planning and undertaking scheduled maintenance.
• Supervising engineering and technical staff.
• Creating maintenance procedures.
• Managing stocks of supplies and equipment.
• Arranging permits for critical work done.
• Conducting special tool usage skills to labors.
• Checking safety apparatus conditions.
• Preparing QAQC inspection requests.
• Conducting tool box permit for each job.
• Managing time and man-hour according to the duration.
• Manage to progress on shift basis.
• Reading P&ID and isometric to describe about job and work location to both operating authority.
• Carrying out Piping erection operations and construction of fuel gas line including all related
supports and steam tracing and construction of BS11 and BS21 area of the brown field.
• Witness and examine all test data including dye penetration test, MPI, RT & UT.
• Construction of different modules in the pipe rack for the working plant.
• Review and understand Engineering policies and procedure, participate in any improvement.
• To ensure that the pipeline and all the facilities have been completed according to the Project
Specifications and that commissioning and related operations will take place safely and effectively.
• Check all the components of pipeline, pipeline assembly, welding joints according to isometrics,
orientation, alignment and plumpness and the quality of installation, their compliance with the
drawings and specifications and manufacturers instructions are followed.
• Security fences have been installed and emergency vehicle access is provided to all above ground
high pressure pipeline facilities.
• Conducting hydro test of CS and GRE pipes and responsible for line checking after hydro test to
complete the post punch list prior to sign-off the test packages before signing the completion of
piping / mechanical.
• Dewatering and drying of the pipeline that has been completed in accordance with specifications
and approved procedures.
• Testing and adequate flushing of all piping systems, removal of all blinds or spool pieces used
during hydrostatic testing and proper positioning of spectacle blinds.
• All pipeline pressure and leak tests have been completed and check all relevant certified test
documents have been received.
• Preservation of pipelines are carried out to maintain pre-commissioning conditions either with dry
air or nitrogen.
• Preparation and execution of leak test including high pressure nitrogen leak test.
• Steam blowing of pipe lines.
• Coordinate equipment procurement handing the work at sleeper and rack for BS11 and BS21 of
brown field.
• Supervising installation of underground storage tanks and pipeline.
• Torque tightening of bolts in flanges of different ratings.
• Review project documents including the scope of work, project specifications and its related
drawings.
• Reviewing and raising MTO(s) for all materials required for the different modules for hydro test and
pneumatic test and highlight any shortage to procurement team.
• Responsible for in accordance with schedule, Procedures, Specifications, Priorities and Availability
of Construction Drawings. QAPCO

Role & Responsibility:
• Experience in TIE-IN Shut down works.
• Experience in Shut down for Reactor, Columns and Drums work.
• Experience in building construction, supports and foundation work.
• Experience in valve interlock installation and calibration system.
• Supervised Hydro testing activity for various pipelines and piping.

Role & Responsibility:
• Carrying out final P&ID check of installed piping systems in the module.
• Responsible for carrying out Mechanical Clearance, Conducting Hydro and Pneumatic tests,
fulfilling commissioning and Pre-Commissioning requirements for the project.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that
there is no prolongation of project.
• Performing Site Modification of Design Drawings related to Piping & Equipment arrangements.
• Renovation of the reformer during shutdown with the replacement of 960 tubes and replacement
of damaged refractory linings.
• Coordinating in the manufacturing of Ethylene tank.
• Performing & coordinating the As-Built & Commissioning.
• Attend the progress meeting with Client and meetings regarding the closure of work packs.
• Extensive experience in performing the project requirements and with Safety, on-time completion
as per standard requirement and planning.
• Coordinating with Engineering and Construction Department and liaise with the Client on
engineering requirement details.
• Elaborates construction feasibility analysis evaluating the available materials & drawings.