QA/QC Painting & Coating Inspector
Samsung Engineering
Total des années d'expérience :12 years, 5 Mois
1- Pipe Line FBE coating Inspection
2-Girth Weld area surface preparation inspection
3-Girth Weld inspection of Wrapping Consusa Tape.
4-high Voltage Holiday Test.
5-Thrust Boring Road Crossing pipe line coated with Thermo wrap Application.
6-Inspection of line before backfilling.
Conforming and recording climate and surface conditions like humidity, due point, air temperature and metal temperature using hygrometer / digital heliometers to decide the job to proceed or not.
Verifying the surface condition before starting the job.
Witnessing and recording surface preparation for painting.
In process inspection of application of primer coat including checking wet film thickness, and after drying inspection and recording of dry film thickness.
In process and final inspection of intermediate and final coating applications.
Holiday testing of coated pipes and inside tank for burial and immersion services / sponge holiday detector.
Familiar with Aramco Standards and Approved Protective Coating Systems (APCS).
Witness of surface preparation, paint application, FBE coating, testing and coating of field joints, flanges, blind flanges, spectacle plates PWHT joints pipe supports, reinforcement pad.
Calibration experience in calibrating various gauges such as pressure, temperature, etc and also different type of transmitters and valves
Make sure that activities are being done according to Health, Safety and Environmental Specifications approved by international organization and client.
Educate the workers whenever required about the job site to meet the standards.
• Monitoring daily progress and keeping records of Coated Girth Weld.
• Perform 100 percent High Voltage Spark Test for Internal FBE Coated Girth Welds prior to client inspector random inspection.
• Witness DFT, Adhesion and Curing Tests as per applicable Aramco/Client Standards.
• Review of Videos and Manual Reports prior and after cleaning or coating of internal coated girth welds.
• Close coordination with our SMD & Q.C Departments for any dispute regarding coating application method, coating materials used and type of work.
• Coordinate closely with Executive and Safety Department to ensure work permits are obtained and Safety Procedures are followed.
• Acts as an adviser at site to propose and implement solutions to complex coating issues on behalf of the company.
• Inspection of piping and structural painting / coating activities.
• Conducting receiving inspection of all paint materials including abrasives, paints and thinner, FBE Powder.
• Conforming and recording climate and surface conditions like humidity, due point, air temperature and metal temperature using hygrometer / digital heliometers to decide the job to proceed or not.
• burial and immersion services / sponge holiday detector.
• Familiar with Aramco Standards and Approved Protective Coating Systems (APCS).
• Witness of surface preparation, paint application, FBE coating, testing and coating of field joints, flanges, blind flanges, spectacle plates PWHT joints pipe supports, reinforcement pad.
• Calibration experience in calibrating various gauges such as pressure, temperature, etc and also different type of transmitters and valves
Ø Inspection of piping and structural painting / coating activities.
Ø Inspection all painting equipments like compressor, blasting pot, nozzles
and connecting hoses, airless and conventional spray units.
Ø Inspection and testing of paints.
Ø Conducting receiving inspection of all paint materials including abrasives,
paints and thinner, FBE powder.
Ø Conforming and recording climate and surface conditions like humidity,
due point, air temperature and metal temperature using hygrometer / digital
heliometers to decide the job to proceed or not.
Ø Verifying the surface condition before starting the job.
Ø Witnessing and recording surface preparation for painting.
Ø In process inspection of application of primer coat including checking
wet film thickness, and after drying inspection and recording of dry film
thickness.
Ø In process and final inspection of intermediate and final coating applications.
Ø Holiday testing of coated pipes and inside tank for burial and immersion
services / sponge holiday detector.
Ø Familiar with Aramco standards and Approved protective coating
systems(APCS).
Ø Witness of surface preparation, paint application, FBE coating, testing and
Ø coating of field joints, flanges, blind flanges, spectacle plates PWHT joints
pipe supports, reinforcement pad.
Ø Calibration experience in calibrating various gauges such as pressure,
temperature, etc and also different type of transmitters and valves
Inspection of piping and structural painting / coating activities.
Ø Inspection all painting equipments like compressor, blasting pot, nozzles
and connecting hoses, airless and conventional spray units.
Ø Inspection and testing of paints.
Ø Conducting receiving inspection of all paint materials including abrasives,
paints and thinner, FBE powder.
Ø Conforming and recording climate and surface conditions like humidity,
due point, air temperature and metal temperature using hygrometer / digital
heliometers to decide the job to proceed or not.
Ø Verifying the surface condition before starting the job.
Ø Witnessing and recording surface preparation for painting.
Ø In process inspection of application of primer coat including checking
wet film thickness, and after drying inspection and recording of dry film
thickness.
Ø In process and final inspection of intermediate and final coating applications.
Ø Holiday testing of coated pipes and inside tank for burial and immersion
services / sponge holiday detector.
Ø Familiar with Aramco standards and Approved protective coating
systems(APCS).
Ø Witness of surface preparation, paint application, FBE coating, testing and
Ø coating of field joints, flanges, blind flanges, spectacle plates PWHT joints
pipe supports, reinforcement pad.
Ø Calibration experience in calibrating various gauges such as pressure,
temperature, etc and also different type of transmitters and valves
Inspection of raw materials including limestone, shale, iron ore, silica sand.
Ø Inspection of material after mixing in raw mill.
Ø Inspection of clinker after raw mixture passing through kiln.
Ø Checking the quality of cement after passing through cement mill.
Ø Witnessing and recording the packing of cement.
Ø Controlling the iron ore (4%) in ordinary port land cement (OPC) and
iron ore (8%) sulphite resistance cement (SRC).
Ø Physical testing of cement like hardness, strength, cracks, compression
strength.
Ø Checking quality of cement through X-Ray Analyzer.
Ø Maintaining the temperature of kiln.
BGAS-CSWIP Qualified Painting Inspector Grade 2
1st divison (78.06%)