System Architect
UST GLOBAL
Total years of experience :16 years, 8 Months
Project Commisioning
G.E Energy OIL & GAS
ð Worked in Standardization of Functional Logic Diagram for STEAM TURBINE
and Electric Motor driven Compressor
ð Developed the standard Logic for the Auxiliary system i.e. Lube Oil system,
Jacking Oil, Turning gear, Condensate System, Lube Oil Cooler system Sequences
of Steam turbine System
ð Trip valve Sequence, Drain Valve Sequence etc.
ð Standard Functional Logic Diagram Preparation for all the Logic
ð Worked on the Core control Logic Development and Testing of Antisurge Control
System, Master Control, Load Control, Governor System
ð Standardization of Tags to be used for Project in PLC and HMI side
ð Simulation and Testing of Control software
ð Preparation of Cause and Effect Diagram
ð Building I/O list
ð Making the Document for checking of Ex-I Loops
ð UCS layout preparation
ð GAS Turbine Software Control
Working on the Preparation of Control Software for PGT25 Base DLE machine in
Mark VI-e System with Mark VI-eS Safety System and Cimplicity HMI
ð Preparing the IO Base Rack Assignment
ð Preparation of HMI Document
ð Modbus Serial Communication List
ð Purchase Specification document
ð Power supply schematic
ð BOM assignment
ð Vetco Gray Subsea Control
ð Working on the MCS Control System for NEX GEN MCS Project
ð Making of Functional Design Specification for control
ð Documenting the Test Procedure for different Logic
ð Testing of Logic as per the Test Procedure
ð Logic Development for different module EPCM, SCM, CAN Bus Connectivity
with SCM, Shutdown Sequence, Acoustic Sand Detector, Intrusive Sand Detector
Logic in RSLogix software with Intouch Scada
ð Developing Functional Logic Diagram in Microsoft Visio
Having experience of working in plant EOEG, PVC/VCM, and Gas cracker unit (GCU) at Reliance industries Ltd
Field Instrumentation:- Commissioning, Selection, testing and troubleshooting of various types of flow, level, pressure and temperature instruments, Hookup drawing, Loop diagram, Cable scheduling of DCS HONEYWELL as well as PROVOX DELTA V system, Instrument layout diagram, Datasheet preparation, Selection of Instruments.Wiring diagram
PLC - Siemens s7 & s5, AB plc Rslogix5, SLC 500, Control logix,
SCHNEIDER & Omron PLC and Overview of Siemens PCS 7, G.E FanucESD & Turbine PLC-ABB August, Triconex, Mark VI-e SCADA- INTOUCH wonderware and Siemens WinCC SCADA SYSTEM, Cimplicity DCS - Honeywell and Provox DeltaVDCS and Yokogawa centum CS (Configuration & operational activities and further testing.)
PROJECTS & COMMISSIONING
Worked in the project of Reliance Industries Ltd. And O.N.G.C Ethane Pipe line and Ethane Fractionating Column commissioning in Gas Cracker Unit
1. Selection of Field Instruments & Isolators, Barriers Taking care of HazardousZone Classification, IP protection class as per Different Standards
2. Preparation of Loop Drawing for all the Instrument Loop from Field to Control Panel
3. Cable and JB Scheduling for the Instrument Loop
4. Preparation and Testing of Trip and Interlock Philosophy of all the Loops
5. Configuration and Development of Logic in PLC
6. Calibration of Instrument
7. Loop checking
8. Hydro-testing of all the Instrument Tubing
ð Up gradation Project of ABB august PLC to Triconex PLC
1. I/O listing
2. Planning of job in MS project,
3. Selection of PLC from different offer,
4. Making of wiring and Interconnecting diagram,
ð Up gradation of BN-3300 to BN-3500
1. Selection of BN Module and cards
2. Planning of Job in MS project
3. Making of wiring and Interconnecting diagram
4. Selection and Placing order for Panel as per Hazardous area Requirement
5. Preparation of Interlock and Trip Logic philosophy
6. Preparation of Loop Drawing and LCP Wiring Diagram
7. Cable and JB scheduling
ð Solely Handled the Modification of Robotics in Bagging Area of PVC plant.
In this job I have done the PLC programming in SIEMENS S7-300 &.done all the input output listing and Interlocks Philosophy keeping the Safety in Priority.
ð Worked in the Project of Ethylene Oxide Area commissioning,
Where done the Installation & Calibration of Field Instruments with proper hookup drawing, Transmitters, Valve, Temperature elements, Loop & Interlock testing of PLC and DCS with proper cable and JB scheduling.
ð Done the MOC (Management of change) in Bagging area of HDPE plant
In this I have changed the Wieland plc Module to Siemens S7-300 and done the software and hardware configuration.
ð Worked in the Project of REFRIGERATION UNIT commissioning
1) Done the Commissioning of 40 tone VCR unit in EOEG plant
2) Done the Commissioning of 700 tone VAR unit in PVC plant
• PLC loop and Interlock testing
• Installed the Field Instruments according to Hook up diagram
ð Done the Commissioning of De-super heater line for Dryer in PVC Plant
• Installation of Forbes-Marshal PRDS valve
• Loop checking and Interlock checking
• configuration of Loops and I/O points in Emerson Provox DCS
• Installation and Calibration Checking of Transmitters, Valves.
ð Having shutdown Experience of MONO ETHYLENE GLYCOL Plant, POLY VINYL CHLORIDE PLANT and VCM plant
Key Result Areas
Undergone process training in EOEG/VCM/PVC plant which
included
ð Study of process, PFD study P&ID study, Distillation column controls, start up and shutdown procedure, Interlock study.
which included study of Pumps, Compressors, Heat Exchangers, Vessels.
overview of Power Distribution in Gandhar Complex and Single Line Diagram of EOEG Plant.
2007 - B.E. (Instrumentation & Control) Percentage Marks-79.1% (Honours Degree) R.K.D.F Institute Of Science and Technology, BHOPAL
