Abdul Wasi

• Maintenance, Monitoring: Continuous surveillance of network performance includes monitoring signal strength, data throughput, and system health indicators.
• Monitoring Operation and Maintenance of VSAT Hub Systems.
• Providing technical support to resolve operational issues, conducting diagnostics and implementing corrective actions.
• Used iDirect Evolution, Newtec Dialog, and SCPC (Single Channel Per Carrier) are used to employed Earth Stations (ESs) to enhance bandwidth efficiency and service delivery.
• Used TAS (Telecom Application Systems), to manage, monitor, and enhance the delivery of services.
• Used RAK for remotely access to a network or device, typically for maintenance, troubleshooting, or administrative purposes.
• Provisioning VSAT links for VVIP missions and enterprise customers.
• Used satellite Link Budget Calculations and Sun Interference Data for determines the overall performance of a satellite communication link and critical aspects of managing and optimizing a VSAT (Very Small Aperture Terminal) system.
• Indicates positive Link Margin and negative link margin for signal strength performed adjustments like higher power transmission
• Monitoring satellite signal quality communication of VSAT Terminals during sun interference.
• Update RF team and record data Store data locally or in the cloud for long-term reference and historical analysis.
• Measure and analyze continuously monitor RF spectrum analyzer and other tools at both the hub and remote locations.
• Report and act for interference or significant noise increases and take corrective actions as necessary.
• Attend Customers Complaint TT.
• Maintain shift-operating logs, performs rounds, and support vendors on phone to overcome both alarm and system issues.
• Carry on other scheduled activities in daily operational plan and request from vendors and company in the NOC

Duties included LAN/WAN daily operations: Router & switch configurations/Access lists.
Maintained router and switch configurations updated and changed configurations depending on corporate requirements and documentation.
Apply user policy and per Worked order and test speed, worked on L2 MPLS circuits.
Worked with Network Operations installing, monitoring and troubleshooting Cisco devices.
Configured LAN Switching: Cisco Catalyst Core and Edge Switches.
Configured OSPF for assign Area and troubleshooting.
Coordinate with site engineer and troubleshooting in Physical connectivity and configuration issues.
Configured and maintain networked equipment (Switches, ADSL Modems, MPLS connectivity)
Create and maintain networked related documentation like IR Report and RFO for providing different vendors.
Recommend, schedule, and perform Worked improvements, upgrades.
Configured, Troubleshooting and management routing protocol (OSPF)
Configured, and troubleshooting STP and Virtual VLANS.
Created spreadsheets for all outages, giving start and end times, their duration and cause.
Troubleshooting of Worked problems - Made physical changes to routers, switches in order to increase performance.
Performed installations, technical support, troubleshooting and maintenance of Worked equipment
Configured, troubleshooting, and management BGP.
Configured and troubleshooting EBGP and IBGP.
Worked with L2 and L3 Etherchannal.
Using Route map in OSPF and BGP for set the policies as per Worked requirement.
Design and Worked implementation: cabling, Wireless.
Configuration, troubleshooting, cut in and performance acceptance test for Cisco switch and router,
Configuring and troubleshooting VLANs, VTP, and STP.
Review the configuration of new projects for Cisco and Packet-Front devices.
Live the site offices to the du Worked which involve layer 2 and layer 3 switches.
Expertise in make new Worked diagram and upgrade central Worked diagram.
Project Plan and Operation.
Troubleshooting with sites engineer on Fixed networked.

2. Design:
• Simple LAN using Cisco Technology, IP addressing and subnetting scheme, select appropriate routing
Protocol based on user requirements; apply an access list to meet user specifications, Choose WAN services to meet customer requirements
3. Implementation:
• Configured routing protocols, IP addresses, subnet masks, and gateway addresses on routers and hosts, an initial configuration on a router and on a switch, implement access lists and WAN Area Protocols.
4. Troubleshooting:
• Troubleshoot in LAN and VLAN, routing protocols, IP addressing and host configuration, an access list and WAN Area, Security Issues against attacks.
5. Evaluation:
• Evaluate the characteristics of routing protocols, TCP/IP communication process and its associated
Protocols, components of Worked devices, Evaluate key characteristics of WANs.
1. Worked Security:
VLAN design based on core Cisco 4506, 4003 and 3550, 3560 POE switches to isolate traffic/broadcast between different departments.
Designing and implementation of a Worked in call center for termination of E1s for a bandwidth and LAN Connectivity using Cisco Routers and layer 2 Switches in Warid Telecom
Switches used are Catalyst 1900, Catalyst 2950, Catalyst 2960 and Catalyst 3550 (Multi-layer switch)
Configuring & Troubleshooting V-LAN & VLAN Trunking Protocol (VTP).
Configuring & Troubleshooting Spanning-Tree Protocol (STP).
Active member in IT-Support team responsible for technical support of campus Worked of nodes/clients of
DWP Group of Companies (www.dwp.com.pk) distributed over 3 buildings.

Providing Services to these clients.
Telenor Telecom, Warid Telecom, Mobilink Telecom, MCB Bank, Visa, CNBC News, Dawn News, Standard Charted, Mobil Oil, SECP, ABN AMRO Bank, NCR ATM Systems, Get Pharmacy, GAC Shipping, Tapal Tea, OOCL Shipping, Star Technologies, UFone Telecom, Allied bank, HBL Bank.