Stanley Nwosu, Safety Engineer

Stanley Nwosu

Safety Engineer

Al Khaleej Engineering Industrial Consultancy (KEIC)

Location
Qatar - Doha
Education
Bachelor's degree, Mechanical Engineering
Experience
15 years, 3 Months

Share My Profile

Block User


Work Experience

Total years of experience :15 years, 3 Months

Safety Engineer at Al Khaleej Engineering Industrial Consultancy (KEIC)
  • Qatar - Doha
  • January 2021 to November 2023

 Developed and ensures the implementation of both KEIC and contractors approved project safety plan.
 Managed the Health & Safety aspect of the project as a Supervision Consultant.
 Reviewed and approved main contractors’ HSE documents.
 Reviewed and approved HSE personnel of all Contractors on the project.
 Monitored and enforced standards of safety in compliance with KEIC Health & Safety management system and Client’s requirement.
 Conducted inspections and raise reports for non-conformances and other related project elements.
 Reviewed contractor’s compliances and performance.
 Audited Contractors HSE management system and its implementations and other task specific Audits.
 Prepared monthly trend analysis as per the raised observation and send to the contractor for an action plan and close out recommendations.
 Prepared technical guidance and direction for safety and occupational health program implementation.
 Performed audits and inspections of work sites, as required to assure compliance with safety and health program requirements: prepares technical reports of inspections findings; and develops corrective actions.
 Carried out hazard and job safety analysis to ensure proper use of machinery and equipment, personal protective equipment and procedures.
 Conducted accident investigations to ascertain causes and to develop preventive safety measures.

HSE Engineer at Petroleum Technology (Petrotec)
  • Qatar
  • March 2017 to December 2020

 Developed and ensured the implementation/compliance all projects HSE plan
 Reviewed, monitored and ensured implementation of Health & Safety management system.
 I delegated and supervised all site Safety heads/Supervisors/Officers to various company projects.
 Ensured effective communication with contractor’s management, by managing and supervising their activities to ensure compliance with the client’s Health and safety requirement.
 Conducted monthly focus audit on high-risk site activities to ensure adequate implementation.
 Prepared and carried out various mock drill exercise with the management and staffs.
 Reviewed and approved HSSE Plans for projects and subcontractors.
 Chaired accident investigations team.
 Carried out daily workshop and site inspection and ensured compliance to closed out reports.
 Designed, implemented, and monitored Company’s Penalty Matrix and Safety Awards.
 Identified training needs for various sites, design, implement and monitor Company’s Training matrix/plan.
 Trained project team on emergency procedures and general site safety procedures. Also identified training needs and developed training matrix to suit the project training needs. Reviewed, approved, implemented, and monitored project emergency evacuation plans and firefighting systems.
 Attended management meetings on safety concern matters.
 Management representative on all external HSSE related operations and matters.
 Prepared monthly and Bi-weekly report for Clients and Petrotec office.
 Monitored facility for good and quality operations of installations and functional areas
 Identified and reported for defect and non-compliance within the facility.
 Used of checklists for inspection of installations and facilities
 Audited and record reviews of Health & Safety related documents and scopes.
 And several other responsibilities.

Safety Engineer at Gulf Consolidated Contractors (GCC)
  • Qatar - Al Khawr
  • February 2014 to January 2017

 Developed and ensure the implementation of the project safety plan
 Reviewed contractors & Sub-contractors Site HSE management systems.
 Monitoring of contractors' compliance to QCS 2014 regulations & other applicable HSE related regulations/requirements.
 Reviewed & approved all Contractors’ HSE Documents
 Reviewed & approved all project Risk Assessments & Method Statements (RAMS)
 Reviewed & approved CVs, Interview & Approval of all Contractors' HSE personnel to be mobilized to project.
 Conducted project HSE meetings & preparation of MOM.
 Involved in project war room/progress meetings and decision making.
 Ensured Client's interest as regards HSE is secured during project execution.
 Conducted several scheduled Audits of contractors & activities & prep of report, monitor Contractors’ Close-outs
 Conducted routine/non-routine Site inspections & prep of report, monitor Contractor’s Close-outs.
 Conducted Incident investigations & reporting and Incident analysis.
 Conducted various HSE related trend analysis and gap analysis.
 Conducted trainings for Contractors' & other site team members.
 Developed Environmental impact reduction strategies.
 Carried out site focus audit monthly to ensure compliance of safe system of work on site.
 Developed and issue to contractors Fire prevention & firefighting strategies for implementation.

HSE Lead at TERNA
  • Qatar - Ar Rayyan
  • February 2010 to August 2012

 Developed and ensures the implementation of both Terna and contractors approved project safety plan.
 Reviewed and approved main contractors’ HSE documents.
 Prepared monthly trend analysis as per the raised observation and send to the contractor for an action plan and close out recommendations.
 Reviewed contractor’s compliances and performance.
 Constantly keep employees and sub-contractors aware of the risks associated with their task and conducted trainings & Inductions for New workers/Staff.
 Conducted weekly training for workers in relation to their various specialized jobs.
 Conducted site emergency mock drill and supervised by Client’s Representative
 Coordinated site HSE Officers under my authority, Fire Watchers and Hole Watchers as per project requirements
 Aided and guidance on all On-site issues to achieve project HSE objectives & Targets.
 Continuously present at various sites i am deployed and close monitoring of all work activities, to ensure all safe systems of work and PTW are complied with.
 Encouraged good housekeeping and waste segregation at site.
 Ensured Toolbox talks are conducted Daily by Supervisors and I conduct once weekly in compliance to Client's stipulated procedure. Encourage workers to embrace a positive Safety Culture.
 Compiled and provide accidents/incidents/near misses report and also analysis, whenever it is requested of me, including recommendations for presentation to my Lead-HSE Engineer.
 Identified and manage Unsafe Act/Unsafe Condition and other forms of violation at site.
 Ensured Job Safety Analysis \{JSA\}, Permit to Work, Method Statements are complied with by the workforce.
 Conducted daily internal PERMIT TO WORK audit and ensure corrective actions to the deviations found.

Safety Engineer at National Electric Power Authority (NEPA)
  • Nigeria - Port Harcourt
  • February 2007 to December 2009

 Executed safe road diversions to ensure that new diversions are safe and workforces are protected against moving traffic.
 Inspected & monitored all lifting operations preparation of the needed JSA.
 Witnessed and contributed to the daily toolbox meeting.
 Hazard identification and suggesting controls to my Project Safety Engineer.
 Taking daily instructions from my direct superior Safety Engineer and implementing accordingly.
 Monitored Permit to Work is obtained from client office before start of every task and ensure that it is implemented on site.
 Monitored work activity to ensure workers follow safe work procedures and avoid shortcuts.
 Carried out weekly housekeeping and maintaining adherence to clients waste segregation policy.
 Involved in weekly/monthly site inspection/walkthrough alongside with Client & company Safety personnel.
 Monitored hot work activities on site.
 Other routine & non-routine HSE related activities on project

Education

Bachelor's degree, Mechanical Engineering
  • at Federal University Of Technology
  • September 2006

Specialties & Skills

Multitasking
Microsoft Excel
Organisational Skills
Internal Audit
Internal Training
Road Safety
Safety Auditing
Safety Audits
Site Inspection
Risk Management

Training and Certifications

NEBOSH HSE certificate in Process Safety Management (Certificate)
Date Attended:
September 2019
ISO 45001:2018 (Certificate)
Date Attended:
July 2021
ProQual Level 6 Diploma In Occupational Health & Safety Practice (Certificate)
Date Attended:
May 2021
CMIOSH (Certificate)
Date Attended:
October 2022

Hobbies

  • Reading , travelling and professional development