Senior Mechanical Technician
Maaden Waad Al-Shamal Phosphate Company M/S JAL Human Resources Co Saudi Arabia
Total des années d'expérience :19 years, 10 Mois
• Conducting tool box talk before the job starts on daily basis regarding company’s health, safety & environmental policy, work permit & procedures.
• Carried out Pre-Commissioning, Commissioning and Start-up activity and Reporting to plant PC&SU leader.
• Preparing Safe work permits, hot work, Cold work lifting and confined space permit as well as JSA (job safety analyses) prepare and receiving permit.
• Carried out Preventive & Corrective maintenance program activities for Rotating and Static equipment’s.
• To perform minor and major overhaul such as centrifugal pumps, compressors, and positive displacement pumps, compressor and all kind of valves.
• Rectify the shaft alignment of rotating equipment laser alignment and knowledge about mechanical seal replacing and seal plan problem solving
• Performing other works such as preparation of documents site maintaining spare parts, create work requesting and closed work orders in oracle and transportation of material and site cleaning.
• Trouble shooting and repair all type of valves attend the leaking, passing and stuck-up for repairing and overhauling.
• Trouble - shooting and fault findings on Rotating Equipment failure and Inspection of equipment & machinery to lubricate for smooth operations.
• Perform & witnessing the System final box up, Mechanical Running test, lube oil flushing, System leak test and inert gas purging.
• Knowledge about METSO crusher and wobblers’ feeder and Grizzly feeder. Replace the wobblers bar & bearing and Replaced Grizzly cassette and screen panel and jaw die change.
• Knowledge about jaw dies hydraulic cylinder replacement and belt conveyor roller and frame replacement.
• To perform maintenance works on high pressure equipment and hydraulic tensioning and tightening of high pressure joints.
• Carried out Conveyor belt alignment and replaced the head pulley, bend pulley and impact roller, roller frame.
• Carry out blinding and de‐blinding of connecting pipelines to equipment.
• Ensuring that all the tools are properly utilized and Keeping tools & workplace clean on daily basis
• Updating and closing the PM&CM Work orders and reported to maintenance supervisor at the right time.
• Performing other works such as preparation of documents site maintaining spare parts, create work requesting and closed work orders in oracle (SAP) and transportation of material and site.
• Having Good Knowledge in Computer applications, Updating for daily and weekly report in emails
•Attending tool box talk before the job starts on daily basis regarding company’s health, safety & environmental policy, work permit & procedures.
•Carried out pre-commissioning, commissioning & start up activities in equipment such as motors, pumps, blowers, steam turbines, boilers, air compressors.
•Carried out the gas and steam turbine corrective maintenance replaced the carbon seal and bearing replaced.
•Carried out Preventive & Corrective maintenance program activities for Rotating and Static equipment’s. Assisted the vendor in replacement of journal bearings, thrust bearings of steam turbine and pumps.
•Rectifying the shaft alignment of rotating equipment and knowledge about mechanical seal replacing and seal plan problem solving
•Carried out Alignment for Rotating equipment of Pump, Compressor, Blower (Rim and Face, Reverse method and laser alignment)
•Perform & witnessing the System final box up, Mechanical Running test, lube oil flushing, System leak test and inert gas purging.
•To perform minor and major overhaul of rotating equipment such as pumps, compressors, blowers and all kind of valves.
•Trouble shooting and repair all type of valves attend the leaking, passing and stuck-up for repairing and overhauling.
•Trouble - shooting and fault findings on Rotating Equipment failure and Inspection of equipment & machinery to lubricate for smooth operations.
•Carried out Motor solo run and done monitoring of parameters (vibration, Temperature and RPM)
•To perform maintenance works on high pressure equipment and hydraulic tensioning and tightening of high pressure joints.
•Carry out blinding and de‐blinding of connecting pipelines to equipment.
•Ensuring that all the tools are properly utilized and Keeping tools & workplace clean on daily basis
•Having Good Knowledge in Computer applications, Updating for daily and weekly report in emails.
•Attending tool box talk before the job starts on daily basis regarding company’s health, safety & environmental policy, work permit & procedures.
•To perform maintenance works on high pressure equipment and hydraulic tensioning and tightening of high pressure joints.
•Carry out blinding and de‐blinding of connecting pipelines to equipment.
•Performing other works such as preparation of documents site measurements, maintaining spare parts, transportation of material and site cleaning.
•To perform minor and major overhaul of rotating equipment such as pumps, compressors, blowers etc
•Carried out Alignment for Rotating equipment of Pump, Compressor, Blower (Rim and Face, Reverse method).
•Carried out Motor solo run and done monitoring of parameters (vibration, Temperature and RPM)
•Perform & witnessing the System final box up, Mechanical Running test, lube oil flushing, System leak test and inert gas purging.
•Carried out Preventive & Corrective maintenance program activities for Rotating and Static equipment’s.
•Trouble - shooting and fault findings on Rotating Equipment failure and Inspection of equipment & machinery to lubricate for smooth operations.
•Carried out Preventive and corrective maintenance program activities.
•Developing schedules on daily & weekly basis for preventive & corrective maintenance
•Make schedule, daily and weekly routine of preventive and corrective maintenance and prepare Safe work permits for appropriate works like, hot work permit, lifting permit, and confined space permit.
•Preparing Safe work permits, hot work, Cold work lifting and confined space permit.
•To perform maintenance works on high pressure equipment and hydraulic tensioning and tightening of high pressure joints.
•Carry out blinding and de‐blinding of connecting pipelines to equipment.
•Perform Maintenance, Troubleshooting and Overhauling of different kinds of: (API & ISO Standard Equipment) Centrifugal Pumps, Positive displacement pump, Centrifugal Compressors, Gear box, Blower.
•Carried out Alignment for Rotating equipment of Pump, Compressor, Blower (Rim and Face, Reverse method).
•Carried out Maintenance of different kinds Static equipment like, Gate Valves, Butterfly valve, Plug valve, and Ball valve, Globe Valve, Heat Exchanger Vessel and Silos.
•Carried out daily activity of lubrication greasing, oil replacing and updated the system data for make equipment history.
•Having Good Knowledge in Computer applications, Updating for daily and weekly report in emails.
•Keeping tools & workplace clean on daily basis
•Carry out erection of structural, piping, scaffolding and other related mechanical jobs.
•Perform mechanical equipment installation like Agitators, Chemical Dosing Tanks/pumps.
•Carried out Alignment for Rotating equipment of Pump, Compressor, Blower (Rim and Face, Reverse method).
•Carried out Preventive & Corrective maintenance program activities for Rotating and Static equipment’s.
•Maintaining and monitoring Rotating equipment’s vibration and temperature performance.
•Perform Maintenance, Troubleshooting and Overhauling of different kinds of Rotating Equipment like, Centrifugal Pump (Horizontal and Vertical), Submersible Pump, Compressors, Positive Displacement Pumps, Gearbox, Blower, and Centrifuge Sludge Separation Machine.
•Carried out Maintenance of different kinds Static equipment like, Gate Valves, Butterfly valve, Plug valve, and Ball valve, Globe Valve, Heat Exchanger Vessel and Silos.
•Perform corrective mechanical maintenance by troubleshooting cause of malfunction using visual inspection and replacing or repairing broken parts such as gauges, gaskets, bearing, valves, and pumps.
•Carried out Alignment for Rotating equipment of Pump, Compressor, Blower (Rim and Face, Reverse method).
•Carry out erection of structural, piping, scaffolding and other related mechanical jobs.
•Perform mechanical equipment installation like Agitators, Chemical Dosing Tanks/pumps.
•Carried out Preventive & Corrective maintenance program activities for Rotating and Static equipment’s.
•Preparing Safe work permits, hot work, Cold work lifting and confined space permit.
•Rectifying the shaft alignment of rotating equipment.
•To perform maintenance works on high pressure equipment and hydraulic tensioning and tightening of high pressure joints.
•Carry out blinding and de‐blinding of connecting pipelines to equipment.
•Carried out Maintenance of different kinds Static equipment like, Gate Valves, Butterfly valve, Plug valve, and Ball valve, Globe Valve, Heat Exchanger Vessel and Silos.
•Perform corrective mechanical maintenance by troubleshooting cause of malfunction using visual inspection and replacing or repairing broken parts such as gauges, gaskets, bearing, valves, and pumps