مجموع سنوات الخبرة: 48 سنوات, 9 أشهر
يونيو 2012
إلى حتى الآن
Chief Quality Assurance Manager
في NeOz Energy Pvt. Ltd.
البلد :
الهند - غازي اباد
Over all responsible for Oil and Gas sector Centralizer manufacturing work at Ghaziabad unit .
مارس 2007
إلى مارس 2012
Quality Assurance Manager
في Manco international General Contracting , Doha-Qatar
البلد :
قطر - الدوحة
ISO 9001 :2008 Quality system Manager, Trained lead auditor and internal auditor .based at Doha Head Office in an oil and gas EPIC contracting company specialized in crude oil and gas storage Tanks and associated pipe line and refinery area M.E/I/C and control room works.
Now I am available in Ghaziabad, India.
Kindly contact me at my mobile or email : or
+91 1202783073
+919873165649
Now I am available in Ghaziabad, India.
Kindly contact me at my mobile or email : or
+91 1202783073
+919873165649
ديسمبر 2006
إلى مارس 2007
General Manager
في Ludwig Pffifer Gypsum Structural India Pvt. Ltd.
البلد :
الهند - دلهي
Overall responsible for Construction activities of Oil and gas pipeline using Microtunneling technique in Assam-Guwahati for oil india crude and gas pipeline in 7 rivers.
يناير 2006
إلى نوفمبر 2006
Sr.QA/QC Engineer (officiated as Qualty Manager)
في Gammon India Almatar JV
البلد :
عمان - مسقط
taking up a prestigious water transmission system (pipe line laying) project at SOHAR port . The 300 km pipe line has MS and DI pipes(148Km) as well as Seven water service reservoirs and pumping stations. A water desalination plant is setup at Sohar port and water to be transported to three places viz. Shinas, Buraimi, Al- Suwaique (700 Crore project)
• Overall responsible for Quality system and quality control of water pipe line project.
• Documentation as per tender document technical specifications.
• Client approval for stage inspection i.e. Excavation, Trenching, Bedding, Stringing, PE film wrapping/Epoxy coating(SAW Pipe), fit up and jointing, hydro test( partial and final ) .
• Weld joint approval using Radiographic non destructive examination , Welder qualification test approval etc.
• Raw material inspection (DI Pipes, SAW pipes and weld electrodes ) and client approval.
• Pipe laying and jointing insp. before taking approval of client M/ S Energo power projects.
• Deployment of manpower, machinery and other resources.
• Daily progress monitoring and periodic visits of various sites.
• Attending management meetings and conducting departmental meetings. Taking corrective and preventive actions.
• Overall responsible for Quality system and quality control of water pipe line project.
• Documentation as per tender document technical specifications.
• Client approval for stage inspection i.e. Excavation, Trenching, Bedding, Stringing, PE film wrapping/Epoxy coating(SAW Pipe), fit up and jointing, hydro test( partial and final ) .
• Weld joint approval using Radiographic non destructive examination , Welder qualification test approval etc.
• Raw material inspection (DI Pipes, SAW pipes and weld electrodes ) and client approval.
• Pipe laying and jointing insp. before taking approval of client M/ S Energo power projects.
• Deployment of manpower, machinery and other resources.
• Daily progress monitoring and periodic visits of various sites.
• Attending management meetings and conducting departmental meetings. Taking corrective and preventive actions.
سبتمبر 2003
إلى ديسمبر 2005
Deputy General Manager
في Maharashtra Seamless Ltd.
البلد :
الهند - نافي مومباي
(A D.P. Jindal Group Co. , ISO-9001:2000 CERTIFIED)
Company Profile :
Company produces Seamless Steel Pipes of size ranging from 1” to 14” OD. For 1 inch to 7 inch CROSS ROLL PIERCING / PUSH BENCH Technique in coloborration is used whereas for higher OD sizes, DOUBLE PIERCING / PLUG MILL / REELER /SIZING MILL technique is used. The Heat Treatment is done for extra strength . Company products are approved by API, ASTM & IBR. and exported to Middle East and European countries, ONGC, GAIL, Oil India Ltd., etc
Also company is producing ERW Pipes of size up to 20 “ O.D.
• Overall responsible for Quality Control of the product ranging from 1 inch to 14 inch OD and wall thickness from 6 mm to 40 mm. (seamless) and 2” to 20 “ O.D. ERW pipes.
• Monitoring Raw material inspection including chemical analysis and macro analysis.
• Monitoring Process Control including Heat treatment, Threading & Coupling.
• Monitoring Final Inspection using EMI, MPI, U.T., HYDROTEST
• Interaction with Third Party Inspection agencies (IBR, PDIL, Beauro Veritas, LLOYDS, ONGC, Central Engineers India Ltd, TATA Projects, TOYO etc.
• Approval of Test Certificate
• Reviewing and Approval of Quality Manual / procedures / work instructions.
• Organizing ISO-9001Quality Audits
• Leading, Planning, Organizing, Motivating and Training a team of various level managers and engineers.
• Attending management meetings and conducting Quality meetings
• Approving and Setting Quality Norms
• Yield improvement
• Reporting on performance of department / function with regard to achieving objective of the department and the information required to be further processed within the organization
Company Profile :
Company produces Seamless Steel Pipes of size ranging from 1” to 14” OD. For 1 inch to 7 inch CROSS ROLL PIERCING / PUSH BENCH Technique in coloborration is used whereas for higher OD sizes, DOUBLE PIERCING / PLUG MILL / REELER /SIZING MILL technique is used. The Heat Treatment is done for extra strength . Company products are approved by API, ASTM & IBR. and exported to Middle East and European countries, ONGC, GAIL, Oil India Ltd., etc
Also company is producing ERW Pipes of size up to 20 “ O.D.
• Overall responsible for Quality Control of the product ranging from 1 inch to 14 inch OD and wall thickness from 6 mm to 40 mm. (seamless) and 2” to 20 “ O.D. ERW pipes.
• Monitoring Raw material inspection including chemical analysis and macro analysis.
• Monitoring Process Control including Heat treatment, Threading & Coupling.
• Monitoring Final Inspection using EMI, MPI, U.T., HYDROTEST
• Interaction with Third Party Inspection agencies (IBR, PDIL, Beauro Veritas, LLOYDS, ONGC, Central Engineers India Ltd, TATA Projects, TOYO etc.
• Approval of Test Certificate
• Reviewing and Approval of Quality Manual / procedures / work instructions.
• Organizing ISO-9001Quality Audits
• Leading, Planning, Organizing, Motivating and Training a team of various level managers and engineers.
• Attending management meetings and conducting Quality meetings
• Approving and Setting Quality Norms
• Yield improvement
• Reporting on performance of department / function with regard to achieving objective of the department and the information required to be further processed within the organization
سبتمبر 1996
إلى أغسطس 2003
Construction Manager
في Technip india ltd
البلد :
الهند - فادودارا
Company had prestigious projects of M/s Oil India in Narmada -
Godavari Basin at Gujarat 500 Km Oil and gas dual pipe line.
Responsibilities :
• Overall responsible for Planning, Execution and Monitoring of the project CAPEX.
• Recruitment, Selection and Deployment of Resources .
• Approval of contractors.
• Arrangement of Logistics/Health /Safety /Legal aspects
• Project commissioning and handover to client .
• Reviewing and Approval of ISO 9001:2000 Quality Manual / procedures / work instructions.
Discussing and resolving Quality issues with clients and subcontractors
• Attending Management meetings and conducting Project meetings.
• Reporting to Top Management .
Godavari Basin at Gujarat 500 Km Oil and gas dual pipe line.
Responsibilities :
• Overall responsible for Planning, Execution and Monitoring of the project CAPEX.
• Recruitment, Selection and Deployment of Resources .
• Approval of contractors.
• Arrangement of Logistics/Health /Safety /Legal aspects
• Project commissioning and handover to client .
• Reviewing and Approval of ISO 9001:2000 Quality Manual / procedures / work instructions.
Discussing and resolving Quality issues with clients and subcontractors
• Attending Management meetings and conducting Project meetings.
• Reporting to Top Management .
سبتمبر 1999
إلى فبراير 2000
Sr. QA/QC Engineer
في DSS Construction Co. Ltd
البلد :
إيران
: Gas Pipe Line Laying Projects.
Responsibilities :
• In-charge of Quality Department.
• Overall responsible for Inspections like NDT, Hydro Test, Leakage Test, Die Penetrating Test, MPI Test, Welding Test using Radiography.
• Interaction with client for approval.
Responsibilities :
• In-charge of Quality Department.
• Overall responsible for Inspections like NDT, Hydro Test, Leakage Test, Die Penetrating Test, MPI Test, Welding Test using Radiography.
• Interaction with client for approval.
يونيو 1992
إلى أغسطس 1996
Quality Control Manager
في LML Limited
البلد :
الهند - كانبور
Products : Two Wheeler Scooters
Responsibilities :
• Chalking out corrective action plans for Design improvement, cost reduction, waste reduction and productivity improvement.
• Installation & commissioning of Hydraulic, Pneumatic M/c. Planning for production schedule and meeting the target in time.
• Process improvement, Process capability study.
• Feasibility study of import substitutes, improvement in production methods and product reliability of sheet metal parts of S.S., M.S., Copper and Aluminum.
• Dies manufacturing and modification / repair in our fully equipped tool room having CNC Milling, CG, SG, LATHE, EDM and WIRE CUT M/C.
• Development of jigs and fixtures and special purpose machines for production and Quality.
• Reduced the rejection rate to 1%.
• Interaction with suppliers for product improvement and development of new products.
• Attending warranty analysis meetings. Prepared Warranty Trend Analysis graphs for eliminating the need of warranty analysis meeting as well as important management tool for R&D activities.
• Setting Quality targets and norms. Heading Quality Audit team, Members of Steering Committee of Quality Circle.
• Problem solving of Head light cracking problem . Team member of Engine Fuel Efficiency Improvement by Magneto design modification.
• Organizing seminars with the help of outside agencies.
• Working experience on MS-Windows, MS-Office and MS-Project. Knowledge of CPM, PERT Methods.
Responsibilities :
• Chalking out corrective action plans for Design improvement, cost reduction, waste reduction and productivity improvement.
• Installation & commissioning of Hydraulic, Pneumatic M/c. Planning for production schedule and meeting the target in time.
• Process improvement, Process capability study.
• Feasibility study of import substitutes, improvement in production methods and product reliability of sheet metal parts of S.S., M.S., Copper and Aluminum.
• Dies manufacturing and modification / repair in our fully equipped tool room having CNC Milling, CG, SG, LATHE, EDM and WIRE CUT M/C.
• Development of jigs and fixtures and special purpose machines for production and Quality.
• Reduced the rejection rate to 1%.
• Interaction with suppliers for product improvement and development of new products.
• Attending warranty analysis meetings. Prepared Warranty Trend Analysis graphs for eliminating the need of warranty analysis meeting as well as important management tool for R&D activities.
• Setting Quality targets and norms. Heading Quality Audit team, Members of Steering Committee of Quality Circle.
• Problem solving of Head light cracking problem . Team member of Engine Fuel Efficiency Improvement by Magneto design modification.
• Organizing seminars with the help of outside agencies.
• Working experience on MS-Windows, MS-Office and MS-Project. Knowledge of CPM, PERT Methods.
أغسطس 1987
إلى يونيو 1992
Dy. Manager
في Jain Tube Company
البلد :
الهند - غازي اباد
Products : ERW PIPES.
Responsibilities :
• Process Quality Control, Administration.
• Development of Quality procedures for the pipes as per ASTM Standard.
• Implementation of Quality Plans. Visual & Dimensional Inspection, taking product test samples, Co-ordination with lab for test results.
• Training and Manpower development.
Seminars : Attended “Quality and reliability - ISO 9000
Implementation” at ETDC, Jaipur.
Responsibilities :
• Process Quality Control, Administration.
• Development of Quality procedures for the pipes as per ASTM Standard.
• Implementation of Quality Plans. Visual & Dimensional Inspection, taking product test samples, Co-ordination with lab for test results.
• Training and Manpower development.
Seminars : Attended “Quality and reliability - ISO 9000
Implementation” at ETDC, Jaipur.
أغسطس 1985
إلى أغسطس 1987
Assist Engineer-Production
في Hindustan Aeronautics Limited
البلد :
الهند
Products : Jaguar Aircraft Cockpit Accessories - FDR, LRMTS, INS,
COMED
Responsibilities :
• Overall responsible for Production,
• Setup of production activities, Installation & Commissioning of
Machines, Production Facilities, Productivity and yield
• Improvement, meeting production schedule and targets of time.
• Improving cost and quality by process improvement. Training,
• Motivating and leading a team of Senior technicians
COMED
Responsibilities :
• Overall responsible for Production,
• Setup of production activities, Installation & Commissioning of
Machines, Production Facilities, Productivity and yield
• Improvement, meeting production schedule and targets of time.
• Improving cost and quality by process improvement. Training,
• Motivating and leading a team of Senior technicians
أبريل 1975
إلى أغسطس 1985
Jr. Engineer
في Bharat Electronics Ltd
البلد :
الهند - غازي اباد
Products : RADARS, Police Wireless Communication Sets.
Quality Control Dept.
Responsibilities :Process Inspection and Final Insp. Of sub assemblies and Final Assys.
• Installation and commissioning of Machines,
• Set up of Production facilities, Productivity and yield improvement,
• Meeting production schedule and target of time. Improving cost and quality by process improvement.
• Preparation of Test program on DITMCO Circuit analyzer for
inspection of wiring connections of wired chasis, Prod &
• Supervision of sheet metal parts - Brackets, Chasis, hinges, door
latches etc.
• Printed circuit board assy. Using hand soldering, Wave Soldering on ASTRA-400m/c conforming to Military & Air Force specs.
• Sub Assy. Of RADAR - IRMA, TROPO, IFF, PSM - 33 Microwave guides, Power supply etc. including Cable, Cable Forms & Wiring harness.
Seminars : “Quality Circles” in year 1981
“Supervisory development” in year 1982
Approved Inspector of DTD&P (Air) and I of L for BEL products
Quality Control Dept.
Responsibilities :Process Inspection and Final Insp. Of sub assemblies and Final Assys.
• Installation and commissioning of Machines,
• Set up of Production facilities, Productivity and yield improvement,
• Meeting production schedule and target of time. Improving cost and quality by process improvement.
• Preparation of Test program on DITMCO Circuit analyzer for
inspection of wiring connections of wired chasis, Prod &
• Supervision of sheet metal parts - Brackets, Chasis, hinges, door
latches etc.
• Printed circuit board assy. Using hand soldering, Wave Soldering on ASTRA-400m/c conforming to Military & Air Force specs.
• Sub Assy. Of RADAR - IRMA, TROPO, IFF, PSM - 33 Microwave guides, Power supply etc. including Cable, Cable Forms & Wiring harness.
Seminars : “Quality Circles” in year 1981
“Supervisory development” in year 1982
Approved Inspector of DTD&P (Air) and I of L for BEL products
انشر على فيسبوك
انشر على تويتر
مشاركة عبر البريد الإلكتروني