syed akhtar ali, Lead Mechanical Sit Engineer PMC (Building Construction )

syed akhtar ali

Lead Mechanical Sit Engineer PMC (Building Construction )

Ital consult s.p.a PMC ( Project Management & Supervision Consultant KSA)

Location
Saudi Arabia
Education
Master's degree, Mechanical Engineering
Experience
30 years, 6 Months

Share My Profile

Block User


Work Experience

Total years of experience :30 years, 6 Months

Lead Mechanical Sit Engineer PMC (Building Construction ) at Ital consult s.p.a PMC ( Project Management & Supervision Consultant KSA)
  • Saudi Arabia - Mecca
  • My current job since April 2014

Execute projects Sports Training Center Makkah and Jeddah Region Project Covered Area is 388000 M2 and Civil Defense Directorate Hajj Command Administration Building in Makkah (26 floor + 6 floor Car parking Building)
for the Ministry of Interior Saudi Arabia Supervise & Inspect all wet utilities of infrastructure scope (potable
water network, sanitary sewer network, storm water network, irrigation network, Firefighting network).
Company’s role in the Project: PMC (Project Management Consultant)

Responsibilities/Tasks:

• Coordinate with the Projects Execution Department and other stakeholders to ensure projects are being
implemented as per schedule and budget.

• Solid practical experience in HVAC, Plumbing, Firefighting, Irrigation, Storm water, Drainage water, LPG
Gas piping works.
• Develop the scope of work for roads assessment services to be outsourced to ensure delivered work
meets the division needs and requirements.
• Verify Building structural, piping, channel of storm and road design drawings and coordinate with the technical office in case of any technical obstacles to solve them.
• Prepare and present technical reports to project management, including a monthly progress summary report/dash board, and review/evaluate contract or weekly and monthly progress reports for Mechanical works.
• Provide work place mentoring and guidance to less experienced members of staff to ensure they can develop the necessary skills to deliver in their role.
• Good experience and knowledge in reviewing compliance and the interpretation of international quality codes & standards associated with HVAC, water network piping, Firefighting, storm water and infrastructure.

Mechanical Site Engineer at Dar Al Riyadh Engineering & Architecture Consultants
  • Saudi Arabia - Mecca
  • January 2010 to March 2014

 Project : King Abdullah Project Series No-0 (KAP-0)
 Project’s Location : 18 Different Locations in (Saudi Arabia) Makkah Region.
 Client : Ministry of Interior Saudi Arabia (MOI).
 Job Position : Mechanical Site Engineer

My Duties and Responsibilities are!

• As a Team Member of engineers to carryout day to day work as per specification.
• Inspect all Mechanical Works at Construction Site - HVAC, Plumbing, Irrigation, Fountains, Sanitary, Fire Fighting & Pump Room (Equipment, Piping & Accessories).
• Review Shop drawings confirming to Design drawing.
• Monitor progress of Mechanical activities, compare with planned construction schedule and identified activities lagging behind and make sure the completion of project on time.
• Inspect TAB Performance and Commissioning (BMS) all mechanical & HVAC Equipment’s according to the approved technical data and specification.

Mechanical Site Engineer at M.E.C ARCAN Group (Electro Mechanical Contractor) Al-khobar Saudi Arabia.
  • Saudi Arabia - Mecca
  • May 2008 to December 2009

 Project Summary : Anjum Hotel (Jabal Al Kabah) 5 Star Hotel
(1800 Bed Space Project in Makkah Mukarrama).
26 Typical Floors +3 Basements + 4 Technical Floors
 Project Location : Makkah Mukarrama Saudi Arabia.

 Job Position : Mechanical Site Engineer / Mechanical Procurement Engineer

Project Summary
Served as Mechanical Engineer for the construction of a high-rise building hotel of 122, 454 m² Built up Area with total height of 114.79 Mtr. consists of 26th typical floors, served by centralized A/C system (10 No. of Chillers 335 TON) each with total capacity of 33, 500 Ton’s, with FCU's & HRAHU's & AHU's. The mechanical system has also central steam, compressed air system, hot water system with boilers and clarifiers. And there is also central commercial kitchen, laundry and cold stores. There is also gray water plant to provide flushing water for the water closets.
My Duties and Responsibilities are.
• Responsible and installation of all Mechanical Works at Construction Site of HVAC, Plumbing, Irrigation, Fountains, Drainage, Storm Water, Fire Fighting, Boilers, Testing & Balancing and Commissioning of all Mechanical and HVAC System.
• As Mechanical Site Engineer, MEP Contractor responsible for project at Jabal- Al Kabah 5 Star (Anjum Hotel) at Makkah Mukarrama KSA.
• Reviewing the material submittals and following up with Supplier/Subcontractors.
• Planning mobilizing/demobilizing as well as interacting and following up with main contractors to meet deadlines and complete project on schedule.
• Checking shop drawings As-Built Drawing before submitting to the consultant.
• Checking the design drawings and raising queries to consultant for any design issues.
• Organizing and spearheading the coordination meetings with client, consultants, main contractor, and sub-contractor to resolve all coordination issues.
• Providing guidance to suppliers/sub-contractors in case of any issues with the supply management.
• Preparing the project update and reporting to top management and client.

Mechanical Engineer at Al Jabr General Contracting Company
  • Saudi Arabia - Abha
  • April 2006 to April 2008

 Projects : 500 Bed Hospital Baljuraishi and 500 Bed Hospital Turaif.
 City : Baljuraishi near Baha and Turaif Saudi Arabia (North Area KSA).
 Job Position : Mechanical Site Engineer

My Duties and Responsibilities are!

• Responsible for installed all Mechanical Works at Construction Site - HVAC, Plumbing, Irrigation, Fountains, Sanitary, Fire Fighting, Medical Gases, Boiler & Pump Room (Equipment, Piping & Accessories) according to the all applicable quality standards, Specification and approved Equipment & Material’s.
• Done TAB & Commissioning (BMS) of all Mechanical & HVAC Equipment’s.
• Submittals preparation for Mechanical Materials and Equipments for Approval from consultant and Client

Mechanical Engineer at Al Hashim Contracting Company
  • Saudi Arabia - Khobar
  • October 2005 to April 2006

 Company Industry : Construction Company (Electro Mechanical Contractor)
 Projects : Worked in Al-Khobar Head Office.
 Job Position : Mechanical Engineer

My Duties and Responsibilities are!

• Prepare Cost Estimation of all Mechanical and HVAC works involve in the project for jobs bidding. Works including the preparation of material Take-off and Man-Hours on the issued documents and drawing for Tender.

Mechanical Engineer at Mehmoda Trading & Technical Services
  • Saudi Arabia - Khobar
  • May 2001 to October 2005

 Company Industry : Construction Company (Electro Mechanical Contractor).
 Job Position : Mechanical Site Engineer.
 Projects : Different Projects in Eastern Provence Saudi Arabia.
My Duties and Responsibilities are.
Note: I have very good Experience in Saudi Aramco Projects with This Company.

• Responsible and installation of all Mechanical Works including Infrastructure Mechanical works at Construction Site of HVAC, Plumbing, Irrigation, Fountains, Drainage, Storm Water, Fire Fighting, Boilers, Testing & Balancing and Commissioning of all Mechanical and HVAC System.
• Ensured and comply that all the works done are in accordance with Saudi Aramco standard & approved. Construction drawings, contract documents and Saudi Aramco project specifications.
• Responsible for complying Saudi Aramco safety rules and regulations during execution of the project as Saudi Aramco certified work permit receiver.
• Testing Adjusting and Balancing all mechanical & HVAC Equipments according to the approved technical data, specification from calibrated equipment’s.

 Project Completed in Saudi Aramco
• Mechanical and HVAC works at Saudi Aramco (12 Schools Project) in Eastern Province.
• Mechanical and HVAC works at Saudi Aramco (11 Schools Project) in Eastern Province Hafoof.
• Mechanical and HVAC works at Saudi Aramco warehouse Building #1780 in Dhahran.
• Mechanical and HVAC works at Central Administration Building in Eastern Province Abqaiq.
• Mechanical and HVAC works for Water Cooled Chiller Replacement 45 chiller’s, 600 Ton’s Each Chiller at Dhahran, Abqaiq, Udhaliyah & Rastanura .
 Other Projects Involved In Saudi Arabia as a Mechanical Engineer with This Organization
• HVAC works in Steel Plant Change Rooms at Sabic Co, Jubail(East KSA).
• HVAC works at Saudi British Bank at Safwa city (East KSA).
• MEP & HVAC works at Residence Project 132 Villas (G+1). King Faisal University Dhahran (East KSA).
• MEP & HVAC Equipment & Related Accessories at Residence Project Different 20 (G+1) Villas. (EAST KSA).
• Mechanical & HVAC Works at Ittehad Steel Factory Dammam 2nd industrial area.
• Mechanical & HVAC Works at Arasco Building Dammam (KSA).
• Mechanical & HVAC Works Fahim Al-Qahtani Office Building Dammam.

Supervisor / Site Engineer at Habibullah Associates Pvt Ltd. Karachi Pakistan.
  • Pakistan - Karachi
  • January 1996 to May 2001

7. Habibullah Associates Pvt Ltd. Karachi Pakistan.
From January, 1996 to May, 2001

 Company Industry : Construction Company (Electro Mechanical Contractor)
 Job Position : Supervisor / Site Engineer
 Projects : Different Location in Karachi Pakistan.
My Duties and Responsibilities are!
• Mechanical & HVAC works at National Bank of Pakistan Head Office Building Karachi.
• Mechanical & HVAC works at ABN Amro Bank head office Building Karachi.
• Mechanical ah HVAC works at Karachi stock Exchange Extension area.
• Mechanical & HVAC works at Sui Southern Gas Co Head Office Building Karachi.
• Mechanical & HVAC works at N.E.D Engineering University at New Administration and New Library Building.

Apprentice Training at Bolan Castings Ltd Pakistan
  • Pakistan - Karachi
  • August 1990 to September 1992

Apprentice Training at Bolan Castings Ltd Pakistan Auto Mobile Industries.
From 27, Aug, 1990 to 03, Sept, 1992 (2 years)

Education

Master's degree, Mechanical Engineering
  • at Preston University
  • January 2014

Master of Technology in Mechanical Engineering (M-Tech Mechanical)

Specialties & Skills

Languages

Arabic
Expert
English
Expert
Urdu
Expert

Memberships

Member of Saudi Engineering Council Registration No. 169685 as Mechanical Engineer
  • Mechanical Engineer
  • January 2010
Member of Pakistan HVAC Society for Air conditioning Associate Member Since 1998.
  • Associate Engineer
  • January 1998