Total Years of Experience: 5 Years, 1 Months
March 2012
To March 2013
QC INSPECTOR
at HYFAB INDUSTRIES
Location :
India - Hyderabad
• Checking weld joint preparation, fit up, alignment & dimensional inspection as per drawings.
• Maintaining of latest project specification, ITP’s, procedures and drawings.
• Review of approved WPS and PQR.
• Witness of welder qualification test (WQT) and procedure qualification test.
• Review of received filler and consumable Test Certificate (TC).
• Monitoring Welding activities as per WPS
• Monitoring of consumable storage, handling, packing and drying temperature as per project approved procedure.
• Monitoring of Pre heat, Inter pass temperature and inter pass cleaning as per WPS.
• Visual inspection of welded joint profile, surface finish and defects.
• Preparation of joints for NDE as per required Inspection Class.
• Visual inspection of completed welds in the pipe spool and related documentation
• Monitoring PWHT, Hardness checking, PMI checking of pipe spools.
• Witnessing MPT, DPT.
• Test Pack review and documentation.
• Verification of weld repair work.
• Witnessing hydro test and pneumatic test.
• Coordinating and communicating with fabrication supervisor, fitters & welders.
• CoMonitoring & follow up of Quality documents as per ISO
standards.
• Familiar with Welding processes as GTAW, SMAW, FCAW, and SAW.
• Review the Radiography films, witness Ultrasonic test, PT, MPT.
• Preparing cutting layout verifying and approving with concerned authorities. Carrying material inspection at site Witnessing fitup inspection checking root or bevel angle inspection as per drawings given.
• Certified in CSWIP 3.1 welding inspection .approving welding qualification as per ASME sec IX .following ASME SEC IX code as per drawing provided
• Following safety rules as per prescribed
• Assist Quality Assurance Manager in QA/QC relevant tasks.
Ensure that manufactured products and proprietary goods conform to specifications of standard and quality.
• Investigate any failure of product to meet specification and recommend corrective action necessary to ensure conformity with quality specifications and standards.
Collation of Manufacturing Data Records, ensuring traceability is retained on all primary materials from Mill Certificates to the finished product.
• Maintaining of latest project specification, ITP’s, procedures and drawings.
• Review of approved WPS and PQR.
• Witness of welder qualification test (WQT) and procedure qualification test.
• Review of received filler and consumable Test Certificate (TC).
• Monitoring Welding activities as per WPS
• Monitoring of consumable storage, handling, packing and drying temperature as per project approved procedure.
• Monitoring of Pre heat, Inter pass temperature and inter pass cleaning as per WPS.
• Visual inspection of welded joint profile, surface finish and defects.
• Preparation of joints for NDE as per required Inspection Class.
• Visual inspection of completed welds in the pipe spool and related documentation
• Monitoring PWHT, Hardness checking, PMI checking of pipe spools.
• Witnessing MPT, DPT.
• Test Pack review and documentation.
• Verification of weld repair work.
• Witnessing hydro test and pneumatic test.
• Coordinating and communicating with fabrication supervisor, fitters & welders.
• CoMonitoring & follow up of Quality documents as per ISO
standards.
• Familiar with Welding processes as GTAW, SMAW, FCAW, and SAW.
• Review the Radiography films, witness Ultrasonic test, PT, MPT.
• Preparing cutting layout verifying and approving with concerned authorities. Carrying material inspection at site Witnessing fitup inspection checking root or bevel angle inspection as per drawings given.
• Certified in CSWIP 3.1 welding inspection .approving welding qualification as per ASME sec IX .following ASME SEC IX code as per drawing provided
• Following safety rules as per prescribed
• Assist Quality Assurance Manager in QA/QC relevant tasks.
Ensure that manufactured products and proprietary goods conform to specifications of standard and quality.
• Investigate any failure of product to meet specification and recommend corrective action necessary to ensure conformity with quality specifications and standards.
Collation of Manufacturing Data Records, ensuring traceability is retained on all primary materials from Mill Certificates to the finished product.
March 2011
To March 2012
MECHANICAL QC INSPECTOR
at Nuclear Fuel Complex
Location :
India - Hyderabad
• Knowledge Carrying out welding inspection, as per ASME code
● in (WPS), ASTM codes, ASME section IX.read and interpret P&ID, ISOMETRIC drawings.Carrying Load test of overhead (EOT) cranes SWL 150T
● Exposed to maintenance activities of overhead cranes .Familiar with ITP, Non conformity report (NCR), PUNCH LIST
● Certified ASNT NDT LEVEL II (RT UT MPT, DPT)
● Trained in ISO 9001-2008 TOTAL QUALITY MANAGEMENT SYSTEMS.
● Certified in QA\QC PIPING as per ASME B31.1.Knowledge in hydro test of pipe as per international specified standards. Maintained inventory records and other store activities.
● Trained in bulk material handling.Coordinate with subcontractors and its team and complete the project on schedule without any cost overruns.Knowledge in INCOLOY 870 steam generator tubes production ZIRCOLOY and stainless steel seamless tube production .
Designing of tools using catia pro e
Maintenance of heavy machinery
Inspect finished product with quality control department
updating material report with primeavera and sap mm module
good experience of six sigma tools and iso 9001 paterens.
● in (WPS), ASTM codes, ASME section IX.read and interpret P&ID, ISOMETRIC drawings.Carrying Load test of overhead (EOT) cranes SWL 150T
● Exposed to maintenance activities of overhead cranes .Familiar with ITP, Non conformity report (NCR), PUNCH LIST
● Certified ASNT NDT LEVEL II (RT UT MPT, DPT)
● Trained in ISO 9001-2008 TOTAL QUALITY MANAGEMENT SYSTEMS.
● Certified in QA\QC PIPING as per ASME B31.1.Knowledge in hydro test of pipe as per international specified standards. Maintained inventory records and other store activities.
● Trained in bulk material handling.Coordinate with subcontractors and its team and complete the project on schedule without any cost overruns.Knowledge in INCOLOY 870 steam generator tubes production ZIRCOLOY and stainless steel seamless tube production .
Designing of tools using catia pro e
Maintenance of heavy machinery
Inspect finished product with quality control department
updating material report with primeavera and sap mm module
good experience of six sigma tools and iso 9001 paterens.
March 2011
To March 2012
MECHANICAL ENGINEER
at NATIONAL THERMAL IONPOWER CORPERATION
Location :
India - Hyderabad
● Implemented inspection and operation of pumps, exposed to power plant operation and overhauling procedure.
● Knowledge in non destructive testing techniques(NDT) of turbines
● Prepare, review &analyze project progress reports of internal and subcontractors companies on daily basis.
● Technical coordination with vendor personals and report to higher management on critical issues along with daily progress report of plant, Carry out regular maintenance activites .
● Online inspection in pipe mill, Online inspection In Internal and External FBE Coating mill,
● Witnessing of UT, MPI, Radiography film review, Review of NDT and daily production activity reports.
• Final visual and dimensional inspection.
• Coordinating with client and maintaining the stage wise inspection documents.
• Inspection of Loading and Unloading.
• Inspection of Port Handling, stacking and loading in vessel.
• Visual and Dimensional Inspection of welded pipes.
• In process inspection of welding in fabrication units and production after completion of welding as per customer specification.
• Witness of UT and PT on pipes.
• Carrying out Ultra sonic thickness gauge tests on boiler tubes.
• Visual and dimensional inspection of boiler tubes.
● Knowledge in non destructive testing techniques(NDT) of turbines
● Prepare, review &analyze project progress reports of internal and subcontractors companies on daily basis.
● Technical coordination with vendor personals and report to higher management on critical issues along with daily progress report of plant, Carry out regular maintenance activites .
● Online inspection in pipe mill, Online inspection In Internal and External FBE Coating mill,
● Witnessing of UT, MPI, Radiography film review, Review of NDT and daily production activity reports.
• Final visual and dimensional inspection.
• Coordinating with client and maintaining the stage wise inspection documents.
• Inspection of Loading and Unloading.
• Inspection of Port Handling, stacking and loading in vessel.
• Visual and Dimensional Inspection of welded pipes.
• In process inspection of welding in fabrication units and production after completion of welding as per customer specification.
• Witness of UT and PT on pipes.
• Carrying out Ultra sonic thickness gauge tests on boiler tubes.
• Visual and dimensional inspection of boiler tubes.
Share on Facebook
Share on Twitter
Share Via Email