Bayt.com

Submitting more applications increases your chances of landing a job.

Here’s how busy the average job seeker was last month:

Opportunities viewed

Applications submitted

Keep exploring and applying to maximize your chances!

Looking for employers with a proven track record of hiring women?

Click here to explore opportunities now!
We Value Your Feedback

You are invited to participate in a survey designed to help researchers understand how best to match workers to the types of jobs they are searching for

Would You Be Likely to Participate?

If selected, we will contact you via email with further instructions and details about your participation.

You will receive a $7 payout for answering the survey.


User unblocked successfully
Syed Muhammad Jamil, Senior Project Engineer

Syed Muhammad Jamil

Senior Project Engineer·Ma’aden Phosphate Company

Saudi Arabia

Bachelor's degree, Electrical Engineering

Work experience

Total years of experience: 24 years, 7 months

Senior Project Engineer

November 2018 - Present

Ma’aden Phosphate Company

Turaif, Saudi Arabia

I found this job using Bayt.com

November 2018 - Present

As a Lead Project Engineer, responsible for supporting Affiliate to accomplishing the CAPEX Projects from CDP till project formal closeout. It includes supervising, planning, monitoring, and reporting assigned projects with compliance to applicable SABIC SES and IES.
1) CDP: Review Concept Development Package and accept the project in order to execute from
binging to handover and closeout financially in SAP.
2) Project Management: Prepare and submit Project Execution Strategy and close monitoring for execution and proper technical and commercial closeout.
3) Bidding: Conduct Bidder Prequalification, Prepare Invitation to bid, the scope of work, reviewing & drafting contract etc.
4) Schedule: Review, Analyses, Monitoring, Developing Project Schedules of various kinds and sizes of projects (What if, Recovery, Various levels, Shutdown, regular, etc.).
5) Communication: Extensive communication with end-users, various stakeholders, s and contractors to run the project smoothly from engineering, design, and installation to close out.
6) Cost: Budget, Costing, and CASH reporting at various stages and levels.
7) Assistance: Assisting to department Sr. Managers and GM at various levels of Planning and
Costing issues.
Company industry:
Mining & Quarrying
Job role:
Management

Project Engineer

April 2009 - April 2018

SABIC - Saudi Kayan Petrochemical Company

Eastern Province, Saudi Arabia

April 2009 - April 2018

As a Lead Project Engineer, responsible for supporting Affiliate to accomplishing the CAPEX Projects from CDP till project formal closeout. It includes supervising, planning, monitoring and reporting assigned project with compliance to applicable SABIC SES and IES.
 CDP: Review Concept Development Package and accept the project in order to execute from binging to handover and closeout financially in SAP.
 Project Management: Prepare and submit Project Execution Strategy and close monitoring for execution and proper technical and commercial closeout.
 Bidding: Conduct Bidder Prequalification, Prepare Invitation to bid, scope of work, reviewing & drafting contract etc.
 Schedule: Review, Analyses, Monitoring, Developing Project Schedules of various kind and size of projects (What if, Recovery, Various levels, Shutdown, regular etc.).
 Communication: Extensive communication with end users, various stakeholder and contractor to run the project smoothly from engineering, design and installation to close out.
 Cost: Budget, Costing and CASH reporting at various stages and levels.
 Assistance: Assisting to department Sr. Managers and GM at various levels of Planning and Costing issues.
Company industry:
Petrochemicals & Refined Petroleum Products Manufacture
Job role:
Oil and Gas

Electrical Design Engineer

December 2006 - April 2009

DAR Al-Riyadh Engineering & Design Consultant (Pvt.)Ltd

Eastern Province, Saudi Arabia

December 2006 - April 2009

As Design Electrical Engineer, responsible to execute the projects from basic design to detail engineering design (e.g. development of system philosophy, electrical load calculations, and project planning & design execution which includes but not limited to
 Identifying customer requirement and developed electrical system philosophy from concept to completion.
 Verification of SABIC, ARAMCO and international codes and standards (e.g. IEEE, IEC, BS, EN, NEC, NFPA70) compliance.
 Electrical equipment sizing (e.g. transformer, generator, cable sizing, lux calculation etc.) and prepared data sheets, specifications, single line diagram, MTO’s, SOW, plant hazardous area classification etc.
 Conducts field investigations and prepares reports for design problems and issues.
 Prepared power, grounding, duct layouts, lighting & power panel schedule and sub-station facility design.
Company industry:
Business Consultancy Services
Job role:
Electrical Engineering

Senior Electrical Engineer

August 2007 - August 2008

Presson Descon International (Pvt.) Limited (PDIL)

Lahore, Pakistan

August 2007 - August 2008

was responsible for electrical related works of the project with following role but not limited to
 Resource planning for all electrical and related works prior to execution.
 Construction management and assure optimum outcome of site work.
 Brief drawings and documents to the downstream of the Organization to execute job per defined standard and specification.
 Interface and coordination of works with Client, Contractor, other discipline and departments.
 Review and report plan and actual progress to all stakeholder on periodical basis.
 Pre-commission and commission assistance of all Electrical discipline systems.
 “EHSS is first” by ensuring all applicable health, safety, environmental standards.
Company industry:
Construction & Building
Job role:
Oil and Gas

Senior Electrical Engineer

January 2006 - December 2006

CLOUGH Engineering & Integrated Solutions Pty Limited

Karachi, Pakistan

January 2006 - December 2006

As Senior Electrical Engineer, my responsibilities were included but not limited to the following
 Design Power, Control, Earthing and Lighting system with IEC/NEC standards.
 Prepared and defined electrical equipment specification’s data sheets, e.g. LV induction motors, transformers, MCC’s.
 ITB preparation, Tech Bid evaluation, Contract preparation.
 Layout plan, hazardous area classification layout plan, electrical equipment and power cable routing layout plan.
Company industry:
Business Consultancy Services
Job role:
Electrical Engineering

Senior Electrical Engineer

January 2006 - December 2006

Persson Descon International (Pvt) LtdDescon Headquaters

Islamabad, Pakistan

January 2006 - December 2006

As Senior Electrical Engineer, my responsibilities were included but not limited to the following
 Design Power, Control, Earthing and Lighting system with IEC/NEC standards.
 Prepared and defined electrical equipment specification’s data sheets, e.g. LV induction motors, transformers, MCC’s.
 ITB preparation, Tech Bid evaluation, Contract preparation.
 Layout plan, hazardous area classification layout plan, electrical equipment and power cable routing layout plan.
Company industry:
General Engineering Consultancy
Job role:
Electrical Engineering

Electrical Engineer

January 2002 - May 2004

ENAR Petrotech Services (Pvt.) Ltd

Karachi, Pakistan

January 2002 - May 2004

Condensate Processing Facilities Project is designed and run by ENAR. Refinery has consumes 100% local condensate as it’s feed and refine to High Speed Diesel, Low Sulfur Furnace Oil, Kerosene, Light Naphtha & Heavy Naphtha.
I had been involved in the designing, procurement, erection, installation, commissioning and master startup of this refinery.
Company industry:
Oil & Gas
Job role:
Engineering

Management Trainee

July 1999 - March 2001

Glaxo Welcome Pakistan Ltd

Karachi, Pakistan

July 1999 - March 2001

As a “Management Trainee” in Projects Department, I was used to co-ordinate for transfer, erection and commissioning of all production machines, generators, transformers as per its centrifuging process and company HSE policy. Moreover
 Installation and maintenance of tablet compression machines, blister-packing machines, strip packing machine, sterile area machines.
 Review and submit GMP validation documentation for systems, equipment & manufacturing processes, including validation plans, protocols and prepared reports.
Company industry:
Pharmaceutical Manufacturing
Job role:
Management

Service Engineer

January 1999 - July 1999

Greaves Pakistan (Pvt.) Ltd

Karachi, Pakistan

January 1999 - July 1999

As Service Engineer, my responsibilities were included but not be limited to the following:
 Installation, testing & commissioning of LT panels, automatic transfer switching panels, DC drives & others controls related devices.
 Installation, testing & commissioned of CNG dispenser panel and time-to-time fault diagnosing.
 Installation, testing & commissioned of different capacity of Diesel Generator Set and responsible for servicing and maintenance.
 Prepare and submit reports for calculation, distribution and optimization of voltage, frequency and RPM levels according to the generating capacity.
Company industry:
Installation & Technical Services
Job role:
Electrical Engineering

Education

NED University of Engineering & Technology

December 1998

December 1998

Bachelor's degree, Electrical Engineering

Pakistan

GPA (percentage): 75%

GPA (percentage): 75%

View attachment

Aligarh Institute of Technology, Karachi. PAKISTAN

December 1994

December 1994

Diploma, Electronics

Pakistan

GPA (percentage): 80%

GPA (percentage): 80%

View attachment

Skills

Planning and scheduling
Expert
Planning and scheduling
Expert
Site Engineering
Expert
Site Engineering
Expert
Electrical Engineer
Expert
Electrical Engineer
Expert
Electrical Design
Expert
Electrical Design
Expert
Project Management
Expert
Project Management
Expert
MICROSOFT WORKS
Expert
MICROSOFT WORKS
Expert
PROJECT MANAGEMENT
Expert
PROJECT MANAGEMENT
Expert
Engineering and Design
Expert
Engineering and Design
Expert
Planning and Scheduling
Intermediate
Planning and Scheduling
Intermediate
MICROSOFT POWERPOINT
Expert
MICROSOFT POWERPOINT
Expert
SAFETY
Intermediate
SAFETY
Intermediate
Planning and scheduling
Expert
Planning and scheduling
Expert
Site Engineering
Expert
Site Engineering
Expert
Electrical Engineer
Expert
Electrical Engineer
Expert
Electrical Design
Expert
Electrical Design
Expert
Project Management
Expert
Project Management
Expert

Languages

Arabic
Beginner
English
Expert
Urdu
Expert

Memberships

Pakistan Engineering Council

Life time member

December 1998

Saudi Engineers Council

Electrical Engineer

January 2018

Training and Certifications

Certifications
Saudi Council Engineer
Jan 2018 - Dec 2019
Show credentials

Hobbies

  • Reading books, Singing sons