HSE Coordinator
ACL
Total years of experience :8 years, 8 Months
• Coordinate with Safety Assistants.
• Direct supervisors to remove non compliance from site if any observed.
• Do training need analysis and schedule training for site supervisors, engineers, foreman as per need.
• Coordinate with client and consultants.
• Prepared HSE Induction on PPT. for Consultants (RE, ARE)
• Represent ACL in any Official meeting of Consultants
• Periodic EHS inspections of work areas and equipment to ensure worker safety.
• Stayed current on all environmental safety regulations.
• Compiled reports on inspection results and determined if follow-up actions were taken.
• Checked for clear safety violations and alerted upper management and subcontractor to resolve issues.
• Responded to employee concerns regarding EHS matters.
• Conduct EHS training and screening programs.
• Supervise documentations PTW( only hot work), TBTs, EHS Induction, Training record, Emission report, fire extinguisher log, third party inspection report on every equipment, Inspection checklist of all equipment.
• Periodic EHS inspections of work areas and equipment to ensure worker safety.
• Prepared reports on any observed violations and recommended ways to correct issues.
• Supervise EHS Committee and discussed any observed issues.
• Stayed current on all environmental safety regulations.
• Compiled reports on inspection results and determined if follow-up actions were taken.
• Checked for clear safety violations and alerted upper management and subcontractor to resolve issues.
• Responded to employee concerns regarding EHS matters.
• Conduct EHS training and screening programs.
• Supervise documentations done by SC (UCC) like PTW, TBT, EHS Induction, Training record, water test report, Emission report, fire extinguisher log, third party inspection report on every equipment, Inspection checklist of all equipment.
• Do documentations like PTW, TBT, EHS Induction, Training record, water test report, Emission report, fire extinguisher log, third party inspection report on every equipment, Inspection checklist of all equipment.
• Performed periodic EHS inspections of work areas and equipment to ensure worker safety.
• Prepared reports on any observed violations and recommended ways to correct issues.
• Served on EHS Committee and discussed any observed issues.
• Stayed current on all environmental safety regulations.
• Compiled reports on inspection results and determined if follow-up actions were taken.
• Checked for clear safety violations and alerted upper management.
• Responded to employee concerns regarding EHS matters.
• Conduct EHS training and screening programs.
• Performed periodic EHS inspections of all OXY rigs and equipment to ensure worker safety.
• Prepared reports on any observed violations and recommended ways to correct issues.
• Maintain documentation of all, Slinger shackles certificate, hydrogen, Minimax cylinders inspection reports.
• Served on EHS Committee with SDL and MWD Unit staff and discussed any observed issues on monthly visit on rigs.
• Take, discuss, and recommend action on reported unsafe act, condition Via HOC card by Unit staff on weekly basis.
• Stayed current on all environmental safety regulations.
• Compiled reports on inspection results and determined if follow-up actions were taken.
• Checked for clear safety violations and alerted upper management.
• Maintain Training records of employees done by HALU, yearly 42 courses per person.
Being Lead hand of the performed the additional duties of HSE are
• Maintaining Documents like MSDS, Fire Extinguisher valid certificate, Slings and shackles Inspection certificates.
• Do Tool Box meeting before any other than usual activity like Rig up/dn.
• Make Risk Assessment sheet before any unusual activity.
• Update the office with Tool Box meeting minutes.
• Take care of crew performing Job with proper PPE.
• Try minimize hazard from the workplace by applying Elimination, Substitution, administration control.
Other duties were
• Make rig up
• Calibrate the Gas system.
• Callibrate the sensors.
• Monitor the drilling parameters.
• Trouble shoot the sensor problems.
• Examine the cuttings under microscope and write the description of the sample.
• Monitor the changes in samples
• Monitor the Gasses.
• Examine the sample cuttings under UV scope to estimate the oil shows.
• Make the tests to estimate the oil shows.
• In Reservoir Coordinate with Town by DD, MWD and SDL data to Geosteer the well.
• Monitor the Rig operation and Well by the help of real time chart and real time screen.
• Monitor the well while tripping.
• Prepare the Mudlogs, Update Cutting description, drilling mud data, drilling parameters, MWD data.
• Send reports to Town Geologist and Drilling parameters to Comp man.
• Prepared and QC the borehole log of CP wells, piling and water well.
• Supervise the bar, pouring and Qc of Concrete in pile.
• Supervise the Pile integrity test and share reports of cylinder testing, PIT, bar testing reports with Client.
• Interpret Wire line logs (Gamma ray, Neutron density) and mark the zone of interest.
• Coordination with Clients.
• Perform several Test on ground water like “72 hours pump test, PH and Hardness of water” etc.
• Prepare final report.
• Assist to ensure the Implementation of Health and safety Rules.
• Prepared the logs of all bore holes.
• Performed the pile load test.
• Performed the tests, Slump, loss Angeles test, Specific gravity, Water absorption, etc.
• QA/QC Quality Control/Assurance of Concrete at site and from plant.
• Checked the compaction of lean + control ratio of lean.
• Took the FDT and proctor compaction.
• Visit site on a regular basis to ensure interest and awareness of HSE are maintained, conduct regular safety talks and safety training sessions as required by the type of existing work and working environment which exists on site.
• Participate in the development and review of safety procedures, safety training programs and in safety audits.
• Identify and communicate personal protective equipment (PPE) requirements and train the employees to ensure that the PPE requirements are properly implemented and enforced.
• Practice housekeeping at lab and at sites.
• Sample description and conducting the lab test of samples like N.M.C, Gradation, Atterbergs limits, Proctor Compaction Test, Strength Compression Test, % of Bitumen, Unconfined compression test, C.B.R.
• Experience of the fields. Zero point Islamabad (Construction of flyover) \{Rotary drilling\}, PNS Raza (Construction of 24 Barrack men) Rotary drilling, and Road inspection of super highway to Malir halt, KPT Custom Department Auger drilling, and Plate load test.
• Conduct corings while rotary drilling and write the core description.
IGC1: Health And Safety Management, IGC2: Health And Safety On Workplaces Controlling Measures, IGC3: Report On Application Of H&S (Oil & Gas Exploration).
it was 6 month 11 subjects based full time diploma. for e.g Main Courses: • Introduction to HSE management, Hazard identification and risk assessment, OHSAS 18001, Environmental Management ISO 14001, Drug free workplace, Occupational Incident and accident.
I completed my 4 year course of geology (3 years of hons and 1 year of M.Sc) in april 2008.