E/I Superintendent engineer
Intecsa Industrial
Total years of experience :7 years, 9 Months
12/2012- Present E/I Superintendent engineer
Company: Intecsa Industrial has been working since its origin, in the oil and gas facilities, refineries and petrochemical plants, as well as in the power and infrastructures sectors.
Assignment: Al Jubail-Saudi Arabia.
Job Description:
• In charge of all the construction phases related to electrical and instrumentation
• In charge of all the pre commissioning phases related to electrical and instrumentation
10/2012- 11/2012 Electrical engineer
Company: INITEC Energía, S.A. has more than 50 years experience in its field: engineering projects in the energy sector, The Company is leader in this activity in Spain and has merited prestige in the international market
Assignment: Spain-Madrid.
Job Description
Working in the head office in the construction department
10/2011-8/2012 ELECTRICAL COMMISSIONING ENGINEER
Company: INITEC Energía, S.A. has more than 50 years experience in its field: engineering projects in the energy sector, The Company is leader in this activity in Spain and has merited prestige in the international market
Project: Navoi C.C.P.P 477.5 MW
Responsibilities: INITEC Energía leads, in consortium with Turkish engineering Çalik, the EPC project for first electricity generation power plant with combined cycle
Assignment: Navoi -Uzbekistan.
Job Description
• Preliminary steps for testing and commissioning
Before carrying out T&C, review all the T&C procedure and it's include the essential procedure plus additional procedure required for specific installation as well as manufacture's recommendation, review approved shop drawing and equipment schedule, check manufacturer's operating instructions and statuary requirement, physical inspect the installation and equipment to determine variation from design and/or specification.
• Testing and commissioning during construction
Insure that all component and systems are in satisfactory and safe condition before start up; ensure that all installation complies with all relevant statutory requirements according to IEC standard, the tests and inspection shall include but not limited to the following (Visual inspection, continuity, insulation, etc.)
• Commissioning and start-up
Check all the function check related to the equipment, starting the system in sequence until it put to operation.
• Over all operation
Arrange start up sequence between the systems in order to get normal operation including all the interlock between.
Emphasis
• (MV SWGR-LV SWGR-MCC-Generator-SWYD-Motors)
-Check all the interlock and the trip signals
• MHI for (Gas turbine generator, SFC, Excitation)
• Make all fields testing for component and equipment in accordance with contract specification and standard codes.
• Make all pumps test (Vibration, dp, RPM, rotation, no load and full load test)
• SWYD (Substation)
-check all the test required
-check all the interlock signals between equipment
• Check and test the fire system of detectors, panels, module, horns for operation starting
• Check the systems signals to be ready for operation
• Follow the test protocols of all HVAC system of fans testing and Air condition tests
-Panels check
-logic check
-Fans (Vibration, Noise, Temperature)
• Make all testing of CT's, PT's
- Check all interface signals between generator protection, SYD, AVR, TCS and main XFMR protection
-Function check
• District heating system
• Power transformer-ZTR, AREVA
• Battery charger
Preliminary and visual check, battery check open circuit, insulation check, electrical inspection test, battery commissioning charge, battery commissioning discharge
• Diesel generator
Function check, logic,
• MCC
-ABB RE615 Relay
• LV SWGR
- ABB RE615 Relay
• Switchgear
- Siemens 7SJ62
• DCS-ABB
- check all the electrical signals required-fix the problems
01/2011-06/2011 ELECTRICAL COMMISSIONING ENGINEER
Company: INITEC Energía, S.A. has more than 50 years experience in its field: engineering projects in the energy sector, The Company is leader in this activity in Spain and has merited prestige in the international market
Project: Cairo West Thermal power plant Units 7 & 8 2x350 MW Unit.
Responsibilities: In charge of the commissioning / Startup of CP117 and CP118 for mechanical- Equipment/pipe
Consultant: All Construction and start up was under consultant of PGESCo Power Generation Engineering and Services Co.
Assignment: El_Wraq-Cairo West-Egypt
Job Description
• Follow up the test and start up procedure.
• Make all fields testing for component and equipment in accordance with contract specification and standard codes.
• Make all pumps test (Vibration, dp, RPM, rotation, no load and full load test)
• Check and test the fire system of detectors, panels, module, horns for operation starting
• Check the systems signals to be ready for operation
• Follow the test protocols of all HVAC system of fans testing and Air condition tests
-Panels check
-Fans (Vibration, Noise, Temperature)
• Make all testing of CT's, PT's
- Check all interface signals between generator protection, SYD, AVR, TCS and main XFMR protection
-Function check
• Fire system
• Heat Trace system
• Diesel generator
• MCC
• Switchgear
08/2008-12/2010 ELECTRICAL CONSTRUCTION SUPERVISOR AND COMMISSIONING ENGINEER
Company: INITEC Energía, S.A. has more than 50 years experience in its field: engineering projects in the energy sector, The Company is leader in this activity in Spain and has merited prestige in the international market
Project: NUBARIA III POWER STATION 750MW COMBINED CYCLE.
Responsibilities: In charge of the electrical construction work installation and the commissioning / Startup of CP106 consortium with ALSTOM for steam turbine generator & condenser and CP118 for mechanical-Equipment/pipe installation phase:
Steam Turbine Generator
Pump House
Intake Area
Consultant: All Construction and start up was under consultant of PGESCo Power Generation Engineering and Services Co.
Job Description
During the project construction work: • Check for compliance with requirements the electrical equipments at the arrival from Spain, France or other.
• Follow all the construction installation as per NECA standard code.
• Follow up the Cable tray & conduits installation according to the standard codes
• Wire all steam turbine generator mounted devices and auxiliary skid mounted instruments
• Make all skid electrical grounding
• Install all electrical required for proper operation of the HVAC equipment include local disconnect switches, local starters and control panels.
• Follow the requirement as per standard national fire protection association (NFPA)
• Install all electrical cables, wiring and termination for all devices or panels which belong to this contract according to standard code IEEE and NEMA.
• Check all drawing revision update to get the work in prober way
• Monitoring the subcontractor Quality, records and quality of the installation construction work (electrical) as cabling equipment skids evaluating work report document submittal
• Monitoring Quality, records and quality of the electrical construction work and Reviewing and evaluating the sub contractor (KAHROMICA) work report document submittal
• Monitoring the vendors Quality, records and quality the electrical Commissioning work and start up phase and Reviewing and evaluating report document submittal.
• Approve of the construction work in accordance with technical norms applied in the contract or ALSTOM German applicable norms.
• Ensure variations are processed and approved.
• Write inspection reports and initiating Non-conformance Report, Worksheets and Equipment deficiency reports as needed.
• Ensure projects are executed in accordance with regulatory compliance.
• Follow up punch list items.
• Follow the contractor planning and report to the Project management for any deviation from the contractor.
During the project commissioning work: • Follow up the test and start up procedure.
• Make all fields testing for component and equipment in accordance with contract specification and standard codes.
• Make all pumps test (Vibration, dp, RPM, rotation, no load and full load test)
• Check and test the fire system of detectors, panels, module, horns for operation starting
• Check the systems signals to be ready for operation
• Follow the test protocols of all HVAC system of fans testing and Air condition tests
-Panels check
-Fans (Vibration, Noise, Temperature)
• Make all testing of CT's, PT's
-Meggering
-Polarity
-Turns Ratio
-Primary Injection
• Check all interface signals between generator protection, SYD, AVR, TCS and main XFMR protection panel
-Loop check
-Function check
• Check all the functions to be ready for final synchronising
-Generator testing
-Dummy test
• Submit all the tests protocols
-Perform daily & weekly activity report to the Site Manager
Assignment: Beyhara-Egypt.
Project Profile: Steam Turbine Generator
* Synchronous generator 324 MVA
* Generator protection Relay ABB MICOM P343
* Synchronizing SYNCHROTACT®5
* DCS contra cad system (ALSBAT30020)
* TCS
* AC Motors 400 V- 3 Phases
* Submersible Pumps of 20 kW
* Instrumentation
* HVAC system MIRACO and GREENHECK for (CTG building, STG building, Control building, Pump house, Oil and Grease building)
* Fire system Chemetro AM2020 include fully fire system control (CTG building, STG building, Control building, Pump house, Oil and Grease building, Transformers/SYD area, Tie between the two power stations)
Pump House
* 3 x centrifugal pump of 1.6 MW
Intake Area
* Dredge system with slurry, cooling and hydraulic pumps unit
* Jip Crane of 10000 Kg of 4 motors 400 volt
11/2007-07/2008 ELECTRICAL CONSTRUCTION SUPERVISOR AND COMMISSIONING ENGINEER
Company: INITEC Energía, S.A. has more than 50 years experience in its field: engineering projects in the energy sector, The Company is leader in this activity in Spain and has merited prestige in the international market
Project: TALKHA POWER STATION 750MW COMBINED CYCLE.
Responsibilities: In charge of the electrical construction work installation and the commissioning / Startup of CP106 consortium with ALSTOM for steam turbine generator & Auxiliary phase:
Steam Turbine Generator
Pump House
Consultant: All Construction and start up was under consultant of PGESCo Power Generation Engineering and Services Co.
Job Description
• In charge of Pre-commissioning, commissioning & testing supervision: Company site representative
• Monitoring Contractor's Quality, records and quality personnel for compliance with requirements
• Reviewing and evaluating subcontractor (KAHROMICA) work report document submittal
• Writing inspection reports and initiating Non-conformance Report, Worksheets and Equipment deficiency reports as needed
• Following up punch list items
• Following up RFI documents
• Follow up the test and start up procedure for (Transformer, MCC, WL pumps)
-Protection
-Earthling leakage
-Setting review
-Run Tests
• The loop and the function tests
• The signals to DCS for checking Loop and function
• Submit all the tests protocols
• Check all drawing revisions update to get the work in prober way
-Perform daily & weekly activity report to the Site Manager
Assignment: Mansora-Egypt.
Project Profile
Steam Turbine Generator
* 1x transformer 204/207/340 MVA - 220/19 KVolts
* 3 MCC's Electro George
* 20 x AC motors 400 V- 3 Phases,
* HVAC system for (STG building)
* Fire system AM2020 for (STG building)
Pump House
* 3 x centrifugal pump of 1.6 MW
09/2005-10/2007 FIELD INSTRUMENT AND CONTROL SYSTEM ENGINEER
Company: DHCU Development & Housing Company for Utilities
Project: GABAL El ASFAR WASTE WATER TREATMENT PLANT.
Responsibilities: In charge of the electrical maintenance work of contract 16.1 & 16.2
Consultant: All maintenance was under consultancy of AMBRIC AND TWI (Thames water international UK)
Job Description
• Organize the distribution of routine work orders for the electrical team for the maintenance operations
• Report all electrical problems to maintenance manager.
• Prepares with the preparation/Planning Engineer the overhauls of electrical Equipment
• Follow-up the working parameters and alarms on electrical equipment for condition monitoring purpose
• Requests availability under work permit of the packages or network, takes all isolation steps at the beginning of the works, gives back to the production Department at the end of the works with relevant reporting and documents updating
• Study all the preventive maintenance.
• Submit letters and performance reports.
• Programming, Maintenance and Troubleshooting of SIMATIC S5
• Design programs with Zelio smart relay
• Maintenance and Troubleshooting of Several Instruments as: • Ultrasonic and Electromagnetic Flow Meters
• Pressure, Level, Temperature and Weight Transmitters
• Proximity Oxygen Analyzer Transmitter
• Flow, Pressure, Temperature, and Differential Pressure Switch
• Fire and Gas Detection
• Planning Tasks
• Reading electrical wiring diagram
Assignment: Cairo west-Egypt.
2000 - 2005: Faculty of Engineering Minya University, Egypt B.SC Electrical Power Engineering and machines