تومان إبراهيم

Duration: (From: Feb.2013 To: April 2014)
Project: GIZA NORTH COMPINED CYCLE PROJECT
Employer: Shaker Consultancy Group
Position: Testing and Commissioning Manager

Project Description: Giza north combined cycle project 500 KV & 220 KV GIS (CP 104)
500 KV GIS, double bus bar, double breaker, 13 bays
220 KV GIS, double bus bar, single breaker, bus coupler, 9 bays
TIE transformers 500\220\11 KV, two transformers, each one 3 single phase transformer

Duties & Responsibilities: - Lead testing and commissioning team and schedule
-Testing and commissioning for: - GIS Equipment and LCC function test
- Control and Protection system
- DC and Batteries,

Faculty of engineering,
Major: (Electric Dept.)

-
Duration: (From: Feb.2013 To: April 2014)
Project: GIZA NORTH COMPINED CYCLE PROJECT

Duration: (From: October 2011 to: marsh 2012)
Project: JAHLOUT Substation Project ( Oman)
Employer: Universal Consulting Engineering (UCE)
Position: Testing and Commissioning\ Protection Engineer

Project Description: 132\33 KV, Air Insulated Substation (AIS), Double Bus Bar with bus section and bus coupler, 12 bays, 10 feeders and 132\33 KV GIS substation, two 125 MVA Power Transformer with four OHL 33 KV & four cable feeders.

Duties & Responsibilities: -Review schematic drawing according to Oman Electric Company standard and requirement
-Prepare as built drawings for feeders and systems
-Supervise Testing and commissioning activities for the substation equipments and systems


Work experience (4): -

Faculty of engineering,
Major: (Electric Dept.)

-
Duration: (From: Feb.2013 To: April 2014)
Project: GIZA NORTH COMPINED CYCLE PROJECT
Employer: Shaker Consultancy Group
Position: Testing and Commissioning Manager

Project Description: Giza north combined cycle project 500 KV & 220 KV GIS (CP 104)
500 KV GIS, double bus bar, double breaker, 13 bays
220 KV GIS, double bus bar, single breaker, bus coupler, 9 bays
TIE transformers 500\220\11 KV, two transformers, each one 3 single phase transformer

Duties & Responsibilities: - Lead testing and commissioning team and schedule
-Testing and commissioning for: - GIS Equipment and LCC function test
- Control and Protection system
- DC and Batteries,
- TIE Transformer
- Prepare as built drawings for systems

Work experience (2): -
Duration: (From: May 2012 to: Feb.2013)
Project: EL-MARG SUBSTATION PROJECT
Employer: Shaker Consultancy Group
Position: Testing and Commissioning Manager

Project Description: 66\11 KV, Gas Insulated Substation (GIS), Double Bus Bar with bus coupler, 11 bays, three 40 MVA Power Transformer, and MV SWGR (42 CELL)

Duties & Responsibilities: -Review schematic drawing
- lead testing and commissioning team and schedule
-Testing and commissioning activities for all the substation equipments and
systems (GIS, MV SWGR, DC and Batteries, Control and Protection systems and equipments)
-Prepare as built drawings for systems


Work experience (3): -
Duration: (From: October 2011 to: marsh 2012)
Project: JAHLOUT Substation Project ( Oman)
Employer: Universal Consulting Engineering (UCE)
Position: Testing and Commissioning\ Protection Engineer

Project Description: 132\33 KV, Air Insulated Substation (AIS), Double Bus Bar with bus section and bus coupler, 12 bays, 10 feeders and 132\33 KV GIS substation, two 125 MVA Power Transformer with four OHL 33 KV & four cable feeders.

Duties & Responsibilities: -Review schematic drawing according to Oman Electric Company standard and requirement
-Prepare as built drawings for feeders and systems
-Supervise Testing and commissioning activities for the substation equipments and systems


Work experience (4): -
Duration: (From: July 2007 to: September 2011)
Project: Cairo West, Units (7&8) (2*350 Mw) Project
Employer: Cairo electricity Production Company

Duration: (From: APRIL 2003 to: Dec. 2005)
Project: Wadi-Hof Gas Station
Employer: Cairo electricity Production Company
Position: Maintenance engineer
Project Description: Wadi-Hof power station is consists of three units (Gas Turbine) with static starter. Each unit 11 KV, 33 MW connected with two power transformer, three winding transformer, and tow units for one transformer and the third unit with the second one. Connected through medium voltage switchgear.

Duties & Responsibilities: - Work as operating engineer for one year
- Work as maintenance engineer for one year and half. During this period overhaul Maintenance was done for tow units by Switzerland engineers (BBC
Company)
- Protection relays testing for transformers, switchgears, generators, 33 Mw, static starter, motors and transducers.


Work experience (7): -

Duration: (From: October 2000 to April 2003)
Project: different
Employer: different
Position: Site Engineer.
Project Description: different: Duties & Responsibilities: -Review and draw the as built drawings for the electric distribution systems and follow up the work in the site
-Maintenance for the emergency diesel generators
-Manage the production process and make the calibration for electric watt-hour meters
-Maintenance for the vegetables production lines


Special Training courses: 1- Fire fighting course- MINISTRY OF DEFENCE- El-Waily Fire fighting center: 2- Safety training course - PGESCO. Company: 3- Training skills and Human Development Courses (El-Nahda Center): - Communication Skills: (Interactive, Motivation, Personality types, Influence, Cooperation and Persuasion methods)
- Team Work Leadership
- Time Management and Planning

Faculty of engineering,
Major: (Electric Dept.)

-

Employer: Shaker Consultancy Group
Position: Testing and Commissioning Manager

Project Description: Giza north combined cycle project 500 KV & 220 KV GIS (CP 104)
500 KV GIS, double bus bar, double breaker, 13 bays
220 KV GIS, double bus bar, single breaker, bus coupler, 9 bays
TIE transformers 500\220\11 KV, two transformers, each one 3 single phase transformer

Duties & Responsibilities: - Lead testing and commissioning team and schedule
-Testing and commissioning for: - GIS Equipment and LCC function test
- Control and Protection system
- DC and Batteries,
- TIE Transformer
- Prepare as built drawings for systems

Work experience (2): -
Duration: (From: May 2012 to: Feb.2013)
Project: EL-MARG SUBSTATION PROJECT
Employer: Shaker Consultancy Group
Position: Testing and Commissioning Manager

Project Description: 66\11 KV, Gas Insulated Substation (GIS), Double Bus Bar with bus coupler, 11 bays, three 40 MVA Power Transformer, and MV SWGR (42 CELL)

Duties & Responsibilities: -Review schematic drawing
- lead testing and commissioning team and schedule
-Testing and commissioning activities for all the substation equipments and
systems (GIS, MV SWGR, DC and Batteries, Control and Protection systems and equipments)
-Prepare as built drawings for systems


Work experience (3): -

Position: Assistant Project Manager

Project Description: Cairo West Project is a new project for adding a new two units to the Existing units. A new two units are 350 MW each, 19 KV connected through step-up transformer (460 MVA, 19/500 KV) to the 500Kv grid, in addition to its auxiliaries (MV and LV switchgears and distribution panels)

Duties & Responsibilities: Engineering Phase (Tendering and Design);
* Tenders review for all electrical systems and equipments in the station (Generator and its auxiliaries, Power transformer, MV & LV switchgear and GIS)
* Offers technical evaluations for each contract
* Design Review for all electrical systems and equipments (submittals and drawings)
- Protection system design and setting review
- Generator and its auxiliaries
- Power Transformers and Iso-phase bus
- Gas Insulated Substation (GIS - 500 KV)
- MV& LV Switchgears
Construction Phase;
Site preparation, and equipments construction, assembly and inspections for: - Power Transformers (HYOSUNG)
- GIS (500 KV) (AREVA)
- Generator and its Auxiliaries (MITSUBISHI)
- MV switchgear and LV distribution panels (EGEMAC)
Start-up, Testing and Commissioning Phase;
Testing, Start up, and Commissioning, for: - Protection Relays setting review, Testing and commissioning for all electric equipment (Generator, GIS, Transformer, MV, and LV SWGR)
Protection relays Types (Beckwith M3425 & M3310, MICOM, VAMP, ABB, Siemens 7SJ600 and SEPAM)
- Power Transformers testing (Turns Ratio, Winding resistance, Tan delta and control panel and Interlock)
- MV Switchgear and LV distribution panels (HV, Meggar, Function and Interlock.)
- GIS 500 KV (HV and Partial Discharge, Function and Interlock local & remote

Faculty of engineering,
Major: (Electric Dept.)

-
Duration: (From: Feb.2013 To: April 2014)
Project: GIZA NORTH COMPINED CYCLE PROJECT
Employer: Shaker Consultancy Group
Position: Testing and Commissioning Manager

Project Description: Giza north combined cycle project 500 KV & 220 KV GIS (CP 104)
500 KV GIS, double bus bar, double breaker, 13 bays
220 KV GIS, double bus bar, single breaker, bus coupler, 9 bays
TIE transformers 500\220\11 KV, two transformers, each one 3 single phase transformer

Duties & Responsibilities: - Lead testing and commissioning team and schedule
-Testing and commissioning for: - GIS Equipment and LCC function test
- Control and Protection system
- DC and Batteries,
- TIE Transformer
- Prepare as built drawings for systems

Work experience (2): -
Duration: (From: May 2012 to: Feb.2013)
Project: EL-MARG SUBSTATION PROJECT
Employer: Shaker Consultancy Group
Position: Testing and Commissioning Manager

Project Description: 66\11 KV, Gas Insulated Substation (GIS), Double Bus Bar with bus coupler, 11 bays, three 40 MVA Power Transformer, and MV SWGR (42 CELL)

Duties & Responsibilities: -Review schematic drawing
- lead testing and commissioning team and schedule
-Testing and commissioning activities for all the substation equipments and
systems (GIS, MV SWGR, DC and Batteries, Control and Protection systems and equipments)
-Prepare as built drawings for systems


Work experience (3): -
Duration: (From: October 2011 to: marsh 2012)
Project: JAHLOUT Substation Project ( Oman)
Employer: Universal Consulting Engineering (UCE)
Position: Testing and Commissioning\ Protection Engineer

Project Description: 132\33 KV, Air Insulated Substation (AIS), Double Bus Bar with bus section and bus coupler, 12 bays, 10 feeders and 132\33 KV GIS substation, two 125 MVA Power Transformer with four OHL 33 KV & four cable feeders.

Duties & Responsibilities: -Review schematic drawing according to Oman Electric Company standard and requirement
-Prepare as built drawings for feeders and systems
-Supervise Testing and commissioning activities for the substation equipments and systems


Work experience (4): -
Duration: (From: July 2007 to: September 2011)
Project: Cairo West, Units (7&8) (2*350 Mw) Project
Employer: Cairo electricity Production Company

Position: Assistant Project Manager

Project Description: Cairo West Project is a new project for adding a new two units to the Existing units. A new two units are 350 MW each, 19 KV connected through step-up transformer (460 MVA, 19/500 KV) to the 500Kv grid, in addition to its auxiliaries (MV and LV switchgears and distribution panels)

Duties & Responsibilities: Engineering Phase (Tendering and Design);
* Tenders review for all electrical systems and equipments in the station (Generator and its auxiliaries, Power transformer, MV & LV switchgear and GIS)
* Offers technical evaluations for each contract
* Design Review for all electrical systems and equipments (submittals and drawings)
- Protection system design and setting review
- Generator and its auxiliaries
- Power Transformers and Iso-phase bus
- Gas Insulated Substation (GIS - 500 KV)
- MV& LV Switchgears
Construction Phase;
Site preparation, and equipments construction, assembly and inspections for: - Power Transformers (HYOSUNG)
- GIS (500 KV) (AREVA)
- Generator and its Auxiliaries (MITSUBISHI)
- MV switchgear and LV distribution panels (EGEMAC)
Start-up, Testing and Commissioning Phase;
Testing, Start up, and Commissioning, for: - Protection Relays setting review, Testing and commissioning for all electric equipment (Generator, GIS, Transformer, MV, and LV SWGR)
Protection relays Types (Beckwith M3425 & M3310, MICOM, VAMP, ABB, Siemens 7SJ600 and SEPAM)
- Power Transformers testing (Turns Ratio, Winding resistance, Tan delta and control panel and Interlock)
- MV Switchgear and LV distribution panels (HV, Meggar, Function and Interlock.)
- GIS 500 KV (HV and Partial Discharge, Function and Interlock local & remote
Panels and fault recorder commissioning)
- Emergency Diesel Generator commissioning and start up protection & control

Work experience (5): -
Duration: (From: Jan 2006 to: July 2007)
Project: Cairo West Power Plant Units (5&6) (2*350 Mw)
Employer: Cairo electricity Production Company
Position: Maintenance Engineer
Project Description: Cairo West Plant is a steam power station consists of four old units (70 MW each) and two units 350 MW, 21 KV connected through step-up transformer (21/500 KV) to the 500Kv grid.
Duties & Responsibilities: - Protection relays testing and setting review
For the power transformers, GIS 500kv, Transmission lines and generators.
- Power Transformers maintenance and testing
- GIS 500 KV maintenance and testing.
- Work as a Training instructor.


Work experience (6): -