Total Years of Experience: 17 Years, 10 Months
September 2018
To Present
QA QC Manager
I found this job using Bayt.com
at QIS
Location :
Qatar - Doha
Qa QC Head of the Susidiaries
May 2016
To August 2018
Senior QA/QC Engineer
at QDVC QSC
Location :
Qatar - Doha
Monitoring & witnesses of WPS/PQR & WQT’s/MPI/PT/HT
Monthly Auditing with Clients Representative
Co-ordination with Third party as well as client related to welding and NDE activities.Co-coordinating the activity of welding inspector assistance (WIA
Review of mill certificates, consumable test certificates and calibration certificates of equipment’s.
Checking that only approved electrode, wires and gas are used. Randomly checking welding parameters according to approved WPS (Ampere, Voltage, Travel Speed and Gas flow rate) Checking the adequacy of equipment for preheating, welding, heat treatments and weld examinations.
Ensuring that weld inspection, examination and test are carried out and documented in accordance with the Quality Control Plan for site activities, verifying the inspection records and validating the relevant results.
Qualification of the Painting system and painting procedures
Qualification of the painters blasters.Monitoring painting coating activities
Monitoring Filing and retaining NDT reports and inspection reports.
Final Inspection Review of Test-Packages.
Initiate DR or NCR and following for correction as required
Monitoring of the welding activities, checking in particular the adequacy of joint preparation protection and provision in case of rain, wind, low temperature etc.
Checking the adequacy of the heat treatment technique and the recorded diagram
Checking the repairs is correctly made.
Experience in working as a Senior QA Engineer in CIVIL, building projects. Responsible for the entire QA/QC activities at site including participation in audits, Preparation of ITP’s, Review of technical documents, Preparation Material submittals as per specifications and contract documents. Co-ordination with QA/QC Manager for the follow up of the day to day activities and Quality Management System as per ISO 9001.
Monthly Auditing with Clients Representative
Co-ordination with Third party as well as client related to welding and NDE activities.Co-coordinating the activity of welding inspector assistance (WIA
Review of mill certificates, consumable test certificates and calibration certificates of equipment’s.
Checking that only approved electrode, wires and gas are used. Randomly checking welding parameters according to approved WPS (Ampere, Voltage, Travel Speed and Gas flow rate) Checking the adequacy of equipment for preheating, welding, heat treatments and weld examinations.
Ensuring that weld inspection, examination and test are carried out and documented in accordance with the Quality Control Plan for site activities, verifying the inspection records and validating the relevant results.
Qualification of the Painting system and painting procedures
Qualification of the painters blasters.Monitoring painting coating activities
Monitoring Filing and retaining NDT reports and inspection reports.
Final Inspection Review of Test-Packages.
Initiate DR or NCR and following for correction as required
Monitoring of the welding activities, checking in particular the adequacy of joint preparation protection and provision in case of rain, wind, low temperature etc.
Checking the adequacy of the heat treatment technique and the recorded diagram
Checking the repairs is correctly made.
Experience in working as a Senior QA Engineer in CIVIL, building projects. Responsible for the entire QA/QC activities at site including participation in audits, Preparation of ITP’s, Review of technical documents, Preparation Material submittals as per specifications and contract documents. Co-ordination with QA/QC Manager for the follow up of the day to day activities and Quality Management System as per ISO 9001.
January 2013
To May 2016
Senior QA/QC Engineer
at Eram Engineering
Location :
Qatar - Doha
Experience in working as a Senior QA/QC Engineer in oil and gas and building projects. Responsible for the entire QA/QC activities at site including participation in audits, Preparation of ITP’s, Review of technical documents, Preparation Material submittals as per specifications and contract documents. Co-ordination with QA/QC Manager for the follow up of the day to day activities and Quality Management System as per ISO 9001.Monitoring & witnesses of WPS/PQR & WQT’s/MPI/PT/HT
Monthly Auditing with Clients Representative
Co-ordination with Third party as well as client related to welding and NDE activities.Co-coordinating the activity of welding inspector assistance (WIA
Review of mill certificates, consumable test certificates and calibration certificates of equipment’s.
Checking that only approved electrode, wires and gas are used. Randomly checking welding parameters according to approved WPS (Ampere, Voltage, Travel Speed and Gas flow rate) Checking the adequacy of equipment for preheating, welding, heat treatments and weld examinations.
Ensuring that weld inspection, examination and test are carried out and documented in accordance with the Quality Control Plan for site activities, verifying the inspection records and validating the relevant results.
Qualification of the Painting system and painting procedures
Qualification of the painters blasters.Monitoring painting coating activities
Monitoring Filing and retaining NDT reports and inspection reports.
Final Inspection Review of Test-Packages.
Initiate DR or NCR and following for correction as required
Monitoring of the welding activities, checking in particular the adequacy of joint preparation protection and provision in case of rain, wind, low temperature etc.
Checking the adequacy of the heat treatment technique and the recorded diagram
Checking the repairs is correctly made.
Experience in working as a Senior QA Engineer in CIVIL, building projects. Responsible for the entire QA/QC activities at site including participation in audits, Preparation of ITP’s, Review of technical documents, Preparation Material submittals as per specifications and contract documents. Co-ordination with QA/QC Manager for the follow up of the day to day activities and Quality Management System as per ISO 9001.
Monthly Auditing with Clients Representative
Co-ordination with Third party as well as client related to welding and NDE activities.Co-coordinating the activity of welding inspector assistance (WIA
Review of mill certificates, consumable test certificates and calibration certificates of equipment’s.
Checking that only approved electrode, wires and gas are used. Randomly checking welding parameters according to approved WPS (Ampere, Voltage, Travel Speed and Gas flow rate) Checking the adequacy of equipment for preheating, welding, heat treatments and weld examinations.
Ensuring that weld inspection, examination and test are carried out and documented in accordance with the Quality Control Plan for site activities, verifying the inspection records and validating the relevant results.
Qualification of the Painting system and painting procedures
Qualification of the painters blasters.Monitoring painting coating activities
Monitoring Filing and retaining NDT reports and inspection reports.
Final Inspection Review of Test-Packages.
Initiate DR or NCR and following for correction as required
Monitoring of the welding activities, checking in particular the adequacy of joint preparation protection and provision in case of rain, wind, low temperature etc.
Checking the adequacy of the heat treatment technique and the recorded diagram
Checking the repairs is correctly made.
Experience in working as a Senior QA Engineer in CIVIL, building projects. Responsible for the entire QA/QC activities at site including participation in audits, Preparation of ITP’s, Review of technical documents, Preparation Material submittals as per specifications and contract documents. Co-ordination with QA/QC Manager for the follow up of the day to day activities and Quality Management System as per ISO 9001.
January 2011
To January 2013
QA/QC Engineer
at hyundai engineering & construction (hdec)
Location :
Kuwait - Al Ahmadi
Experience in working as a QA/QC Engineer in oil and gas and building projects. Responsible for the entire QA/QC activities at site including participation in audits, Preparation of ITP’s, Review of technical documents, Preparation Material submittals as per specifications and contract documents. Co-ordination with QA/QC Manager for the follow up of the day to day activities and Quality Management System as per ISO 9001.
Monitoring & witnesses of WPS/PQR & WQT’s/MPI/PT/HT
Monthly Auditing with Clients Representative
Co-ordination with Third party as well as client related to welding and NDE activities.Co-coordinating the activity of welding inspector assistance (WIA
Review of mill certificates, consumable test certificates and calibration certificates of equipment’s.
Checking that only approved electrode, wires and gas are used. Randomly checking welding parameters according to approved WPS (Ampere, Voltage, Travel Speed and Gas flow rate) Checking the adequacy of equipment for preheating, welding, heat treatments and weld examinations.
Ensuring that weld inspection, examination and test are carried out and documented in accordance with the Quality Control Plan for site activities, verifying the inspection records and validating the relevant results.
Qualification of the Painting system and painting procedures
Qualification of the painters blasters.Monitoring painting coating activities
Monitoring Filing and retaining NDT reports and inspection reports.
Final Inspection Review of Test-Packages.
Initiate DR or NCR and following for correction as required
Monitoring of the welding activities, checking in particular the adequacy of joint preparation protection and provision in case of rain, wind, low temperature etc.
Checking the adequacy of the heat treatment technique and the recorded diagram
Checking the repairs is correctly made.
Experience in working as a Senior QA Engineer in CIVIL, building projects. Responsible for the entire QA/QC activities at site including participation in audits, Preparation of ITP’s, Review of technical documents, Preparation Material submittals as per specifications and contract documents. Co-ordination with QA/QC Manager for the follow up of the day to day activities and Quality Management System as per ISO 9001.
Monitoring & witnesses of WPS/PQR & WQT’s/MPI/PT/HT
Monthly Auditing with Clients Representative
Co-ordination with Third party as well as client related to welding and NDE activities.Co-coordinating the activity of welding inspector assistance (WIA
Review of mill certificates, consumable test certificates and calibration certificates of equipment’s.
Checking that only approved electrode, wires and gas are used. Randomly checking welding parameters according to approved WPS (Ampere, Voltage, Travel Speed and Gas flow rate) Checking the adequacy of equipment for preheating, welding, heat treatments and weld examinations.
Ensuring that weld inspection, examination and test are carried out and documented in accordance with the Quality Control Plan for site activities, verifying the inspection records and validating the relevant results.
Qualification of the Painting system and painting procedures
Qualification of the painters blasters.Monitoring painting coating activities
Monitoring Filing and retaining NDT reports and inspection reports.
Final Inspection Review of Test-Packages.
Initiate DR or NCR and following for correction as required
Monitoring of the welding activities, checking in particular the adequacy of joint preparation protection and provision in case of rain, wind, low temperature etc.
Checking the adequacy of the heat treatment technique and the recorded diagram
Checking the repairs is correctly made.
Experience in working as a Senior QA Engineer in CIVIL, building projects. Responsible for the entire QA/QC activities at site including participation in audits, Preparation of ITP’s, Review of technical documents, Preparation Material submittals as per specifications and contract documents. Co-ordination with QA/QC Manager for the follow up of the day to day activities and Quality Management System as per ISO 9001.
May 2008
To December 2010
QA/QC Engineer
at dodsal engineering & construction pvt. ltd
Location :
Qatar - Doha
Participation in both Internal and external Quality Audits.
Implementation of Project quality plan & Quality management system.
Assist Project Engineers on resolution of quality related issues. Identify quality goals, audit plans, and maintain audit records, NCR, correction action and closeout records.
Implement relevant QA and QC training for all site personnel.
Based on audits, reviews and observations identify gaps and possible risks from quality perspective that may impact project quality and schedule.
Participate in equipment/material inspection, FAT processes.
Reviews materials specifications, supplier's records and technical reports in terms of quality aspects. Manage TPI services where applicable.
Maintain effective Quality records, ensure documents control systems are implemented and maintain traceability mechanism.
Establish QA program, review, monitor and report on compliance, deficiencies and required improvements and ensure that the project team, LTSC, suppliers have quality management systems in place and are complying with project quality requirements.
Liaise with Document Control for records management.
Carry out internal audits to verify that relevant procedures are adequate and effective.
Ensure that QA activities are adequately described in document procedures.
Assist with the Corrective and Preventive Actions (CAPA) process
Raising & tracking of Non Conformances, Deviation Requests & Corrective Actions etc.
Following approved MAR and ITP as per specifications and contract documents.
Co-ordination with Sr. Site QC Manager / Construction Manager for approvals of material and day to day activities.
Co-ordination with Site QC’s & CQCC for RFI’s, testing of materials and dealing with quality issues at site.
Implementation of Project quality plan & Quality management system.
Assist Project Engineers on resolution of quality related issues. Identify quality goals, audit plans, and maintain audit records, NCR, correction action and closeout records.
Implement relevant QA and QC training for all site personnel.
Based on audits, reviews and observations identify gaps and possible risks from quality perspective that may impact project quality and schedule.
Participate in equipment/material inspection, FAT processes.
Reviews materials specifications, supplier's records and technical reports in terms of quality aspects. Manage TPI services where applicable.
Maintain effective Quality records, ensure documents control systems are implemented and maintain traceability mechanism.
Establish QA program, review, monitor and report on compliance, deficiencies and required improvements and ensure that the project team, LTSC, suppliers have quality management systems in place and are complying with project quality requirements.
Liaise with Document Control for records management.
Carry out internal audits to verify that relevant procedures are adequate and effective.
Ensure that QA activities are adequately described in document procedures.
Assist with the Corrective and Preventive Actions (CAPA) process
Raising & tracking of Non Conformances, Deviation Requests & Corrective Actions etc.
Following approved MAR and ITP as per specifications and contract documents.
Co-ordination with Sr. Site QC Manager / Construction Manager for approvals of material and day to day activities.
Co-ordination with Site QC’s & CQCC for RFI’s, testing of materials and dealing with quality issues at site.
August 2006
To May 2008
QA/QC Inspector
at s.k. engineering & construction
Location :
Kuwait - Al Jahra
Participation in both Internal and external Quality Audits.
Implementation of Project quality plan & Quality management system.
Assist Project Engineers on resolution of quality related issues. Identify quality goals, audit plans, and maintain audit records, NCR, correction action and closeout records.
Implement relevant QA and QC training for all site personnel.
Based on audits, reviews and observations identify gaps and possible risks from quality perspective that may impact project quality and schedule.
Participate in equipment/material inspection, FAT processes.
Reviews materials specifications, supplier's records and technical reports in terms of quality aspects. Manage TPI services where applicable.
Maintain effective Quality records, ensure documents control systems are implemented and maintain traceability mechanism.
Establish QA program, review, monitor and report on compliance, deficiencies and required improvements and ensure that the project team, LTSC, suppliers have quality management systems in place and are complying with project quality requirements.
Liaise with Document Control for records management.
Carry out internal audits to verify that relevant procedures are adequate and effective.
Ensure that QA activities are adequately described in document procedures.
Assist with the Corrective and Preventive Actions (CAPA) process
Raising & tracking of Non Conformances, Deviation Requests & Corrective Actions etc.
Following approved MAR and ITP as per specifications and contract documents.
Co-ordination with Sr. Site QC Manager / Construction Manager for approvals of material and day to day activities.
Co-ordination with Site QC’s & CQCC for RFI’s, testing of materials and dealing with quality issues at site.
Implementation of Project quality plan & Quality management system.
Assist Project Engineers on resolution of quality related issues. Identify quality goals, audit plans, and maintain audit records, NCR, correction action and closeout records.
Implement relevant QA and QC training for all site personnel.
Based on audits, reviews and observations identify gaps and possible risks from quality perspective that may impact project quality and schedule.
Participate in equipment/material inspection, FAT processes.
Reviews materials specifications, supplier's records and technical reports in terms of quality aspects. Manage TPI services where applicable.
Maintain effective Quality records, ensure documents control systems are implemented and maintain traceability mechanism.
Establish QA program, review, monitor and report on compliance, deficiencies and required improvements and ensure that the project team, LTSC, suppliers have quality management systems in place and are complying with project quality requirements.
Liaise with Document Control for records management.
Carry out internal audits to verify that relevant procedures are adequate and effective.
Ensure that QA activities are adequately described in document procedures.
Assist with the Corrective and Preventive Actions (CAPA) process
Raising & tracking of Non Conformances, Deviation Requests & Corrective Actions etc.
Following approved MAR and ITP as per specifications and contract documents.
Co-ordination with Sr. Site QC Manager / Construction Manager for approvals of material and day to day activities.
Co-ordination with Site QC’s & CQCC for RFI’s, testing of materials and dealing with quality issues at site.
Share on Facebook
Share on Twitter
Share Via Email