وائل أشرف

• Ali Al-Sabah Military Academy Project
Designation :- Senior HVAC Engineer JOB DESCRIPTION :-
• Worked as a Senior HVAC Engineer in Ali Al-Sabah Military Academy project ( Total capacity 8000 Ton ) for Installation, Operation & Maintenance Of HVAC systems for 39 Buildings . 1. Review the contracts documents (HVAC specification & Concept) and advise the MEP manager of any deficiency 2. Implement cost effective measures for reducing project cost 3. Review Contractors submittals (Equipments Data Sheet, Inspection & Test Plan and Installation Operation & Maintenance Manual) related to the discipline and ensure its compliance with concept design, contract requirements and submit to consultant & client for review & approval 4. Attend technical meetings with consultant/client/contractor and weekly progress meetings with the client. 5. Analyzes system costs including labor (detailed design, engineering, testing, and installation) and components for review with the Project Manager. 6. As appropriate, discuss HVAC requirements with vendors to obtain technical and dimensional information. 7. Works together with design specialists to prepare final drawings. 8. be able to execute tasks within budget and scope. 9. Mentor and assist with the development of Assistant Engineers.

• Worked as a Senior HVAC Engineer in Ali Al-Sabah
Military Academy project ( Total capacity 8000 Ton ) for
Installation, Operation & Maintenance Of HVAC systems
for 39 Buildings .
1. Review the contracts documents (HVAC specification & Concept) and
advise the MEP manager of any deficiency
2. Implement cost effective measures for reducing project cost
3. Review Contractors submittals (Equipments Data Sheet, Inspection &
Test Plan and Installation Operation & Maintenance Manual) related to
the discipline and ensure its compliance with concept design, contract
requirements and submit to consultant & client for review & approval
4. Attend technical meetings with consultant/client/contractor and weekly
progress meetings with the client.
5. Analyzes system costs including labor (detailed design, engineering,
testing, and installation) and components for review with the Project
Manager.
6. As appropriate, discuss HVAC requirements with vendors to obtain
technical and dimensional information.
7. Works together with design specialists to prepare final drawings.
8. be able to execute tasks within budget and scope.
9. Mentor and assist with the development of Assistant Engineers.

• New Jahra Hospital Project.
Designation :- HVAC Project Engineer JOB DESCRIPTION :-

• Worked as a HVAC Engineer in New Jahra hospital project ( Total capacity 16, 800 Ton ) for the Review / Design and install of Mechanical or HVAC systems for health care application. . 1. Calculate the design heating & cooling load of proposed building for HVAC and submit to consultant / client for review & approval 2. Prepare HVAC Drawings (HVAC Plan, Section, Schematic, and Balancing) respect to design requirements and contract requirements with coordination of other disciplines and submitted as per the approved schedules to the consultant / client for review & approval. 3 .Assists ware-house in checking the completeness of the received materials, identification of any damaged, short received materials etc. 4. Co-ordinates with client for MRIR (Materials Requisition & Inspection Report). 5. Co-ordinates with construction management team for readiness of the buildings for installation of HVAC equipments & ducts.
6. water-cooled Chillers (14 chillers, 5 cooling towers, 35 pumps, 3 HVAC hot water boiler, 3 steam boiler ), Chilled Water Piping, Refrigeration Piping, Fan Coil Units, FAHU, ERU, ACCU, MCCU, Wall Mounted Split Units, Exhaust Fans and Air Duct with accessories (volume control dampers, fire dampers etc). 7. Review spare parts operation & maintenance manuals of trades related to the discipline and ensure compliance with contract requirements. 8. Coordinated with Quality Assurance Engineer to ensure that any non conformity has been reported through a NCR (Non Conformance Report) by the client and clear immediately. 9. Witness pre-construction & commissioning activities related to the discipline and ensure full compliance with project requirements.

.
1- Calculate the design heating & cooling load of proposed building for
HVAC and submit to consultant / client for review & approval
2- Prepare HVAC Drawings (HVAC Plan, Section, Schematic, and Balancing)
respect to design requirements and contract requirements with coordination of
other disciplines and submitted as per the approved schedules to the consultant
/ client for review & approval.
3- Assists ware-house in checking the completeness of the received materials,
identification of any damaged, short received materials etc.
4- Co-ordinates with client for MRIR (Materials Requisition & Inspection
Report).
5- Co-ordinates with construction management team for readiness of the
buildings for installation of HVAC equipments & ducts.
6- water-cooled Chillers (14 chillers, 5 cooling towers, 35 pumps, 3 HVAC hot
water boiler, 3 steam boiler ), Chilled Water Piping, Refrigeration Piping, Fan
Coil Units, FAHU, ERU, ACCU, MCCU, Wall Mounted Split Units, Exhaust
Fans and Air Duct with accessories (volume control dampers, fire dampers
etc).
7- Review spare parts operation & maintenance manuals of trades related to
the discipline and ensure compliance with contract requirements.
8- Coordinated with Quality Assurance Engineer to ensure that any non
conformity has been reported through a NCR (Non Conformance Report) by
the client and clear immediately.
9- Witness pre-construction & commissioning activities related to the
discipline and ensure full compliance with project requirements.

• AL-KHARAFI Construction for Trading and Contracting, Kuwait

• SABAH AL-SALEM UNIVERSITY CUP 1&2 Project.
Designation :- HVAC District Cooling Junior Engineer
JOB DESCRIPTION :-
• Worked as District Cooling Engineer in SABAH AL-SALEM UNIVERSITY CUP 1&2 project ( Total capacity 72, 000 Ton) for the Construction of HVAC Systems
1- Undertakes HVAC calculations to determine main performance parameters, sizes and weights. 2- Involve With Construction Team for Chillers, Cooling Towers, pumps( primary secondary and condenser ), Thermal Energy Storage Tank, RO system, AHUs, FCUs and its Auxiliaries . 3- Pre-Commissioning and Commissioning, Start up and operation for All equipments.
4- Ensure the HVAC Ducts, Fittings, accessories and Chilled water pipes, fittings, accessories are available and approved by Inspection department prior to installation 5- Coordinate with other discipline and ensure site clearance is available to start the HVAC Activities. 6- Arrange the sufficient manpower such as Supervisor, Foreman, Duct fitter, pipe fitter, Assistant duct and pipe fitter etc.., and ensure all of them attended safety orientation and having proper PPEs prior start installation activities at site 7- Provide approved HVAC Shop drawing, MEP Co-ordination Drawing to site supervisor (or) Foreman and inform them to shift the required ducting and piping approved material from warehouse to site and arrange required material to avoid progress delay.

Worked as District Cooling Engineer in SABAH AL-SALEM
UNIVERSITY CUP 1&2 project ( Total capacity 72, 000 Ton)
for the Construction of HVAC Systems
1- Undertakes HVAC calculations to determine main performance parameters,
sizes and weights.
2- Involve With Construction Team for Chillers, Cooling Towers, pumps(
primary secondary and condenser ), Thermal Energy Storage Tank, RO
system, AHUs, FCUs and its Auxiliaries .
3- Pre-Commissioning and Commissioning, Start up and operation for All
equipments.
4- Ensure the HVAC Ducts, Fittings, accessories and Chilled water pipes,
fittings, accessories are available and approved by Inspection
department prior to installation
5- Coordinate with other discipline and ensure site clearance is available to
start the HVAC Activities.
6- Arrange the sufficient manpower such as Supervisor, Foreman, Duct fitter,
pipe fitter, Assistant duct and pipe fitter etc.., and ensure all of them
attended safety orientation and having proper PPEs prior start installation
activities at site
7- Provide approved HVAC Shop drawing, MEP Co-ordination Drawing to
site supervisor (or) Foreman and inform them to shift the required ducting
and piping approved material from warehouse to site and arrange required
material to avoid progress delay.

• Jahra Court Complex Project.
Designation :- HVAC Site Engineer
JOB DESCRIPTION :-

• Worked as a Junior HVAC Engineer in Jahra Court Complex project ( Total capacity 2400 Ton ) Research, design, fabricate, and install HVAC mechanical equipment to meet clients requirements in high rise building.
1- Supervise and co-ordinate for supply, installations of mechanical services for HVAC / ACMV (Air-conditioning units & Mechanical fans) including all trade of works. 2- Plan and execute all installation, testing & commissioning works through technical and operational supports. 3-To support & assist in air-conditioning system design layout, amend of shop drawings and as-built drawings. 4-To support & assist in projects installation, servicing & maintenance under contract basis. 5-Do inspection of purchased equipment 6-Over-see site testing and commissioning procedures on site quality control of piping and System Integrator (HVAC equipment / chillers) 7-Co-ordinate with Project Engineer in notifying customers of any changes in design, documentation, planning, schedule or services performed. 8-Ensure all engineering designs, technical drawings and appropriate standards used are properly documented 9-Liaise with consultant, Vendors and client on day to day basis on project issues

Jahra Project.
• Worked as a Junior HVAC Engineer in Jahra Court Complex
project ( Total capacity 2400 Ton ) Research, design, fabricate,
and install HVAC mechanical equipment to meet clients
requirements in high rise building.

1- Supervise and co-ordinate for supply, installations of mechanical services for
HVAC / ACMV (Air-conditioning units & Mechanical fans) including all trade
of works.
2- Plan and execute all installation, testing & commissioning works through
technical and operational supports.
3-To support & assist in air-conditioning system design layout, amend of shop
drawings and as-built drawings.
4-To support & assist in projects installation, servicing & maintenance under
contract basis.
5-Do inspection of purchased equipment
6-Over-see site testing and commissioning procedures on site quality control of
piping and System Integrator (HVAC equipment / chillers)
7-Co-ordinate with Project Engineer in notifying customers of any changes in
design, documentation, planning, schedule or services performed.
8-Ensure all engineering designs, technical drawings and appropriate standards
used are properly documented
9-Liaise with consultant, Vendors and client on day to day basis on project
issues

Designation :- HVAC Site Engineer
JOB DESCRIPTION :-
• Worked as HVAC Engineer in ( Hail University ) in Kingdom of Saudi Arabia for the installation of HVAC systems to meet clients requirements in both large and small projects .
1-Get approved HVAC Shop Drawings, MEP-Coordination Drawings, Work method statement and Project Specification from Project Engineer 2-Supervise ability in HVAC system . 3-Ability to understand design codes & its specification . 4-Preparation of HVAC Site Quantification & BOQ with estimation . 5-Knowledge of the pipe installation, duct installation, plant room installation of HVAC equipment . 6-Knowledge of the cooling tower comissioning. 7-Knowledge of the AHU, FCU Chiller equipment commissioning. 8-Knowledge of the chilled and condenser water pump commissioning. 9-Familarity with calculation layout & sizing of HVAC projects. 10-Ability to handle labours & site materials . 1 1-Knowledge in studying schematic drawings for planning & installation of HVAC system .

• Worked as HVAC Engineer in ( Hail University ) in Kingdom
of Saudi Arabia for the installation of HVAC systems to meet
clients requirements in both large and small projects
.
1-Get approved HVAC Shop Drawings, MEP-Coordination Drawings,
Work method statement and Project Specification from Project Engineer
2-Supervise ability in HVAC system .
3-Ability to understand design codes & its specification .
4-Preparation of HVAC Site Quantification & BOQ with estimation .
5-Knowledge of the pipe installation, duct installation, plant room
installation of HVAC equipment .
6-Knowledge of the cooling tower comissioning.
7-Knowledge of the AHU, FCU Chiller equipment commissioning.
8-Knowledge of the chilled and condenser water pump commissioning.
9-Familarity with calculation layout & sizing of HVAC projects.
10-Ability to handle labours & site materials .
11-Knowledge in studying schematic drawings for planning &
installation of HVAC system .

• Responsible for boiler design & detailing in oil & gas area. Responsibilities would include design and actual detailing of complete equipment systems; design and detailing of balance of plant equipment; specification and selection of appropriate materials; engineering calculations of strength, force, thermal transfer; BOMs and drawings management.

• Design and detailing of the pressure part/non pressure part and design/detailing /

selection of the combustor required for boiler

• Thermal and mechanical calculation for boiler

• Good knowledge of IBR codes and regulation required for pressure part and boiler

design/detailing

• Selection and specification finalization for Fans/ Economiser/ WPH/

Chimney/Piping/Ducting etc.

• Coordination with sales, manufacturing & supply functions for timely completion of

orders

• Manage job costs by specifying cost-effective designs, parts and methods, with strong

emphasis on minimizing engineering and manufacturing labor costs with challenging

time frame

• Specify, select and integrate components used in design, and manage vendor selection

and evaluation process.

• Work with supply team to assist in manufacture of parts, assembly and test of systems.

• Work with customer during concept, design development and review and work with

Sales and Marketing teams for initial proposals.

• Work with project and service team in the execution and troubleshooting & design validation of the product at site