WAQAR KHAN TAREEN, Mechanical Engineer

WAQAR KHAN TAREEN

Mechanical Engineer

Godwin Austen Johnson Middle East Consultant

البلد
الإمارات العربية المتحدة - دبي
التعليم
بكالوريوس, Mechanical Engineering
الخبرات
30 years, 4 أشهر

مشاركة سيرتي الذاتية

حظر المستخدم


الخبرة العملية

مجموع سنوات الخبرة :30 years, 4 أشهر

Mechanical Engineer في Godwin Austen Johnson Middle East Consultant
  • الإمارات العربية المتحدة - دبي
  • أشغل هذه الوظيفة منذ أكتوبر 2017
Mechanical Engineer في Green Concept Engineering Consultant
  • الإمارات العربية المتحدة - دبي
  • يونيو 2014 إلى سبتمبر 2017

To act as the supervision to all aspects of the works (Plumbing, HVAC, Fire Fighting, Medical Gases, Pneumatic Tube System, LPG System & Garbage Chute) including, planning, administration, commercial, engineering, site works, documentation and handover to the client.
Supervision to meet Project goals, while directing the work of the designers on behalf of the client. Over look the design team, provide Engineering solutions.
In-depth understanding of MEP Drawings with Foundations /Civil/Wall openings and interaction of other departments
Comprehensively understand the scope of the contract with respective of their field, and its subsequent development / implementation in an approved manner.
Review/ approval of method statement for all relevant activities.
Review/ approval of shop drawings for all relevant trades.
Review/ approval of material submittals for all relevant trades.
Engineering solution & recommendation for all submitted RFI with the reference of project specification, addendum & contract documentation.
Attend & handling weekly progress meeting along with Contractors, client & suppliers.
Attend & handling coordination meeting with all contractors.
Prepare minutes of meeting for weekly progress meeting & coordination meeting.
Site visit with the client, project management & contractors as schedule.
Individually site visit on daily basis & check activities, quality of work for ensure the MEP works comply with the project specification requirements & make daily progress report & issued Field Observation Report & Non Confirmation Reports to contractor.
Review, check & verification of closed out documentation for issued FON & NCR.
Provide solutions to important engineering issues and coordinate with other disciplines.
Conducting field inspection of mechanical activities/mechanical installation.
Monitor MEP progress to Completion, tracking Project staffing and schedule requirements.
Give direction to the Main Contractor in regard to planning, coordination and construction.
Work very close to Main contractor. Interface with other Contractors and utilities on the Project.
Examine & inspection of all delivered material at site in store & installed material at site.
Attend & inspect/examine MEP Testing & Commissioning.
Preparing snagging & d-snagging.
Review & approval of As Built Drawing for all relevant trades.
Review & approval documentation for project closeout.
Attend corresponding & trouble shouting in duration of Project DLP.

Facility Manager في Salama Holding Group
  • الإمارات العربية المتحدة - أبو ظبي
  • نوفمبر 2013 إلى يونيو 2014

As a Facility manager is responsible for the management of services and processes that support the core business of an organization. They ensure that an organization has the most suitable working environment for its employees and their activities. Duties vary with the nature of the organization, but facilities managers generally focus on using best business practice to improve efficiency, by reducing operating costs while increasing productivity. With wide field with a diverse range of responsibilities, which are dependent on the structure and size of the organization, As a Facility manager is involved in both strategic planning and day-to-day operations, particularly in relation to buildings and premises.

Mechanical Engineer في Ras Engineering
  • الإمارات العربية المتحدة - أبو ظبي
  • أكتوبر 2011 إلى نوفمبر 2013

• To act as the supervision to all aspects of the works (Plumbing, HVAC, Fire Fighting, LPG System & Garbage Chute) including, planning, administration, commercial, engineering, site works, documentation and handover to the client.
• Supervision to meet Project goals, while directing the work of the designers on behalf of the client. Over look the design team, provide Engineering solutions.
• In-depth understanding of MEP Drawings with Foundations /Civil/Wall openings and interaction of other departments
• Comprehensively understand the scope of the contract with respective of their field, and its subsequent development / implementation in an approved manner.
• Review/ approval of method statement for all relevant activities.
• Review/ approval of shop drawings for all relevant trades.
• Review/ approval of material submittals for all relevant trades.
• Engineering solution & recommendation for all submitted RFI with the reference of project specification, addendum & contract documentation.
• Attend & handling weekly progress meeting along with Contractors, client & suppliers.
• Attend & handling coordination meeting with all contractors.
• Prepare minutes of meeting for weekly progress meeting & coordination meeting.
• Site visit with the client, project management & contractors as schedule.
• Individually site visit on daily basis & check activities, quality of work for ensure the MEP works comply with the project specification requirements & make daily progress report & issued Field Observation Report & Non Confirmation Reports to contractor.
• Review, check & verification of closed out documentation for issued FON & NCR.
• Provide solutions to important engineering issues and coordinate with other disciplines.
• Conducting field inspection of mechanical activities/mechanical installation.
• Monitor MEP progress to Completion, tracking Project staffing and schedule requirements.
• Give direction to the Main Contractor in regard to planning, coordination and construction.
• Work very close to Main contractor. Interface with other Contractors and utilities on the Project.
• Examine & inspection of all delivered material at site in store & installed material at site.
• Attend & inspect/examine MEP Testing & Commissioning.

Mechanical Engineer في Dewan Architectural & Consultant Enginners
  • الإمارات العربية المتحدة - أبو ظبي
  • أكتوبر 2010 إلى أكتوبر 2011

• To act as the supervision to all aspects of the works (Plumbing, HVAC, Fire Fighting, LPG System & Garbage Chute) including, planning, administration, commercial, engineering, site works, documentation and handover to the client.
• Supervision to meet Project goals, while directing the work of the designers on behalf of the client. Over look the design team, provide Engineering solutions.
• In-depth understanding of MEP Drawings with Foundations /Civil/Wall openings and interaction of other departments
• Comprehensively understand the scope of the contract with respective of their field, and its subsequent development / implementation in an approved manner.
• Review/ approval of method statement for all relevant activities.
• Review/ approval of shop drawings for all relevant trades.
• Review/ approval of material submittals for all relevant trades.
• Engineering solution & recommendation for all submitted RFI with the reference of project specification, addendum & contract documentation.
• Attend & handling weekly progress meeting along with Contractors, client & suppliers.
• Attend & handling coordination meeting with all contractors.
• Prepare minutes of meeting for weekly progress meeting & coordination meeting.
• Site visit with the client, project management & contractors as schedule.
• Individually site visit on daily basis & check activities, quality of work for ensure the MEP works comply with the project specification requirements & make daily progress report & issued Field Observation Report & Non Confirmation Reports to contractor.
• Review, check & verification of closed out documentation for issued FON & NCR.
• Provide solutions to important engineering issues and coordinate with other disciplines.
• Conducting field inspection of mechanical activities/mechanical installation.
• Monitor MEP progress to Completion, tracking Project staffing and schedule requirements.
• Give direction to the Main Contractor in regard to planning, coordination and construction.
• Work very close to Main contractor. Interface with other Contractors and utilities on the Project.
• Examine & inspection of all delivered material at site in store & installed material at site.
• Attend & inspect/examine MEP Testing & Commissioning.

Mechanical Engineer في Dar Engineering
  • الإمارات العربية المتحدة - دبي
  • نوفمبر 2007 إلى أكتوبر 2010

• To act as the supervision to all aspects of the works (Plumbing, HVAC, Fire Fighting, LPG System & Garbage Chute) including, planning, administration, commercial, engineering, site works, documentation and handover to the client.
• Supervision to meet Project goals, while directing the work of the designers on behalf of the client. Over look the design team, provide Engineering solutions.
• In-depth understanding of MEP Drawings with Foundations /Civil/Wall openings and interaction of other departments
• Comprehensively understand the scope of the contract with respective of their field, and its subsequent development / implementation in an approved manner.
• Review/ approval of method statement for all relevant activities.
• Review/ approval of shop drawings for all relevant trades.
• Review/ approval of material submittals for all relevant trades.
• Engineering solution & recommendation for all submitted RFI with the reference of project specification, addendum & contract documentation.
• Attend & handling weekly progress meeting along with Contractors, client & suppliers.
• Attend & handling coordination meeting with all contractors.
• Prepare minutes of meeting for weekly progress meeting & coordination meeting.
• Site visit with the client, project management & contractors as schedule.
• Individually site visit on daily basis & check activities, quality of work for ensure the MEP works comply with the project specification requirements & make daily progress report & issued Field Observation Report & Non Confirmation Reports to contractor.
• Review, check & verification of closed out documentation for issued FON & NCR.
• Provide solutions to important engineering issues and coordinate with other disciplines.
• Conducting field inspection of mechanical activities/mechanical installation.
• Monitor MEP progress to Completion, tracking Project staffing and schedule requirements.
• Give direction to the Main Contractor in regard to planning, coordination and construction.
• Work very close to Main contractor. Interface with other Contractors and utilities on the Project.
• Examine & inspection of all delivered material at site in store & installed material at site.
• Attend & inspect/examine MEP Testing & Commissioning.

MEP Coordinator في AL-BARAHA LAND BUILDING & ENGINEERING CONTRACTING
  • الإمارات العربية المتحدة - دبي
  • فبراير 2004 إلى أكتوبر 2007

•A B-Tech Mechanical Engineer experience in Design, Installation Planning and Co-ordination with distinguished knowledge and expertise in Engineered Systems.
•Sound knowledge about project engineering and execution of projects right from the initial stage to final handover/close out of projects. Fully aware of different stages of EPIC/MEP type projects and has extensive experience in supervision and co-ordination of activities with clients, consultants and Main/Sub-contractors.
•knowledge in planning coordination, Installation, Testing and Commissioning of MEP systems with high technical knowledge in Mechanical piping, process and structures.
•Lead Engineer (MEP) with knowledge about NFPA regulations, ASHRAE, SMACNA Codes and hands on experience on all types of system installations.
•Technical co-ordination work for installation, testing and commissioning of electro-mechanical equipment.
•Fully Responsible for reviewing, approval and processing of all material submittals, claims, variation, Quantity surveying etc done from the consultant standing from the client side.
•Overseen the technical and managerial problem that may occur for infrastructure and buildings related MEP works and informing the same to Strategic and operation manager.
•Review the MEP related Specification and informing the concerned managers as required for advising the client and related subcontractor.
•Serve as a client representative for all matters related to construction quality assurance of MEP works for residential, commercial and Infrastructure works.
•Monitor the MEP works for conformance with the provision of contract documents and approved system procedures.
•Arrange and record all the MEP related technical meeting as and when instructed by the concerned managers.

Assistant Manager في Pak Suzuki Motor Company Limited
  • باكستان - كراتشي
  • مايو 2001 إلى يناير 2004

•All over maintenance work of Welding Shop, Press Shop and Paint Shop by self hand work.
•Look after maintenance work of all over plant.
•Complete knowledge and controlling on piping work in all over plant. Complete piping of water lines in which use in Welding Shop (It's necessary for Spot Welding) and Paint Shop (It's necessary for Paint Shop). All pipe lines of Air, Pipe lines of Colors Paint, Pipe lines of Grace, Pipe lines of Cellar, Pipe lines of Thinner and Pipe lines of Petrol. These all piping works also include in my responsibilities.
•All controlling of HVAC works.
•Direct handle maintenance and any type trouble of Heavy Compressors, Heavy generators, Gas Turbine, Chillers, Cooling Towers, and Boiler.
•Direct handle maintenance and efficiency of all types of pumps which use in all over plant.
•Look after maintenance work of all Air Conditions which use in all over plant.
•Maintain record of daily trouble shooting sheet of all over plant.
•Direct handling the documentation of new project, project planning and all maintenance work.
•Direct dealing with contractors of new project.
•Daily meeting with departmental supervisor and foremen, meeting with deputy manager and manager of department. Discus on daily reports and planning.
•Special concentrate on KAIZEN work.

Junior Executive في Pak Suzuki Motor Company Limited
  • باكستان - كراتشي
  • مارس 1996 إلى مايو 2001

•All over maintenance work of Welding Shop, Press Shop and Paint Shop by self hand work.
•Look after maintenance work of all over plant.
•Complete knowledge and controlling on piping work in all over plant. Complete piping of water lines in which use in Welding Shop (It's necessary for Spot Welding) and Paint Shop (It's necessary for Paint Shop). All pipe lines of Air, Pipe lines of Colors Paint, Pipe lines of Grace, Pipe lines of Cellar, Pipe lines of Thinner and Pipe lines of Petrol. These all piping works also include in my responsibilities.
•All controlling of HVAC works.
•Direct handle maintenance and any type trouble of Heavy Compressors, Heavy generators, Gas Turbine, Chillers, Cooling Towers, and Boiler.
•Direct handle maintenance and efficiency of all types of pumps which use in all over plant.
•Look after maintenance work of all Air Conditions which use in all over plant.
•Maintain record of daily trouble shooting sheet of all over plant.
•Direct handling the documentation of new project, project planning and all maintenance work.
•Direct dealing with contractors of new project.
•Daily meeting with departmental supervisor and foremen, meeting with deputy manager and manager of department. Discus on daily reports and planning.
•Special concentrate on KAIZEN work.

Mechanical Fitter في Pak Suzuki Motor Company LTD, Karachi, Pakistan.
  • باكستان
  • فبراير 1994 إلى مارس 1996

All over maintenance work of Welding Shop, Press Shop and Paint Shop by self hand work.
Complete knowledge of maintenance of all machinery which use in Welding Shop, Press Shop and Paint Shop of Automobile manufacture Industries.

الخلفية التعليمية

بكالوريوس, Mechanical Engineering
  • في NED University of Engineering and Technology
  • يناير 2000

HVAC Haydrulic Mechanical Analyze Industrial Mechanical Automotive Material Process

دبلوم, Mechanical Engineering
  • في JINHA poly technic institute
  • يوليو 1996

Material Process Mechanical Basic

الثانوية العامة أو ما يعادلها, SSC Sciense
  • في SHAH FAISAL children acadmey
  • أغسطس 1992

Math Chemistery Physics

Specialties & Skills

Installation
Commissioning
AutoCad
MS Office
Drawing Review & Comments
Review Material Submittals & Comments
Site Inspection

اللغات

الأوردو
متمرّس
الانجليزية
متمرّس

الهوايات

  • Traveling