Quality Control Engineer
Premier Composites Technologies
Total des années d'expérience :18 years, 2 Mois
Reading and Interpreting AutoCAD drawing of different Panels
• Checking the quality and dimensions of panels as per drawing and standards
• Performing different NDT Tests on panels as per standard (Thermal Cyclic Test, Pullout test for tiles,
Tension test, Temperature testing)
• Keeping a full record of all the tests, dimensions and other data.
• Surveying workshop on daily basis
• Making quality assurance documents and procedures for all projects.
• Reporting to Quality Control Manager on weekly basis about quality assurance
QA/QC System Implementation
• Developed and implemented STRATA QMS system
• Created multiple processes and procedures for STRATA QMS and EMS implementation which paved a path for successful ISO 9001:2000 audits
• Reporting of Monthly, weekly and yearly KPI performance to Management
• Standardized QC/QA processes for supply chain activities
• Planned and implemented QC/QA processes for A380 and A330-340 Flap track fairings as well as ATR 42/72 Vertical Fin work package transfer projects.
• AS9102 FAI done for over 63 composite class B structural parts
• Application of continuous improvements methods (Lean engineering, RCA, 8D reports, 5Ys etc)
• Member of MRB (Material Review Board), decision making on non-conforming parts and repair activities. Delivered (verify, inspect, validate, audit, check, assess)and planned department-wise KPI for production related QC and QA activities
• Perform, planned and designed several in process inspections for range of products.
• Stakeholder management and communication on milestones and project problems
• Consistent configuration management and implementation of procedures, drawings and other technical documents
• Driving quality policy and quality objectives STRATA wide to achieve high standard of product and customer service
• Certification and qualification of operators and quality inspectors as per customer requirement.
• Continuously monitoring and reporting quality standard of product hence achieved average 90% quality performance for over 1400 shipped parts
• Achieved 0 customer complaints since Feb-13 for A380 project and high customer satisfaction with product quality
• Performed multiple internal audits and implemented corrective actions for continuous improvement of QMS and EMS.
• Managed a staff of 2 quality engineers and 8 quality inspectors. Setting yearly objectives and then helping and guiding them to achieve it.
HSE Implementation
• Working with Municipality/ Government Authorities for closure of findings, new product developments, expansion approvals and HSE issues
• Implementation of first aid training and fire drills.
• Certified Fire Marshal and knowledge of fire safety, first aid and emergency evacuation systems.
Laboratory Qualifications and Implementation
• Managing Quality Labs, Micro testing/ sampling etc.
• Team member of lab qualification for customer audits to qualify for projects
• Helped in installation and qualification of lab testing equipment
• Team member of continuous improvement of lab process improvement and monitoring of test results of the products.
Quality Assurance System Implementation at Unilever
•Managed the Line Quality Assurance and Control activities.
•Coordinated efforts to improve quality of inbound materials by collecting and analyzing supplier performance data.
•Ensured the implementation of GMP, HACCP, FSSC 22000 and ISO 9001.
•Produced procedures and documents for the calibration, maintenance and verification checks for all test equipments for quality and production.
•Supervised site implementation and on-going verification of HACCP plan and pre-requisite programs such as pest controls, allergen management, hygienic controls, etc.
•Participated in early management in site projects as representative of site quality.
•Utilized advanced statistical skills to support quality and production activities across sit.
Consumer and customer complaints at Unilever
•Focal point for all Lipton Dubai products regarding all consumer and customer complaints
•Established Corrective and Preventive Actions for all Quality incidents, complaints and non-conformities.
•Participated in structured quality improvement activities related to customer, consumer issues and CRQS (customer relevant quality standards) gaps.
•Implementation of quality kaizens and projects to reduce customer and complaint
Customer relationship in export markets at Unilever
•Handling export markets such as Australia, New Zealand, Japan, South Africa, Russia, Canada etc for quality related issues.
•Presenting update on continuous improvement projects to Leadership team of export markets
•Monthly submission of quality performance and kaizen/project updates
Innovation management
•Worked closely with R&D team in innovation projects to do proper risk assessment.
•Working with factory team to mitigate the identified risks and propose solutions
•Supported value improvement projects (cost savings) as appropriate for Site Quality.
Distributor management
•Performing external audits on all distributors and suppliers to identify gaps
•Follow up with distributors and suppliers to close those gaps and monitor their continuous improvement progress
•Provide training sessions to distributors and suppliers on quality standards, kaizens, food safety etc
•Weekly, monthly and yearly monitoring of KPIs set with the suppliers and distributors and drive improvement with the help of their management.
• Rate-Gyroscopic Drop Survey (Battery operated survey) AKA RGS-DP
This survey is performed using a Gyro which runs on battery, the gyro is dropped in drill pipe and surveys are
taken while each stand is pulled out of hole. The survey is later downloaded after fishing the tool and processed.
• Rate-Gyroscopic Wellbore Survey (performed with help of wireline) AKA RGS-WB
It’s the same survey as RGS-DP but the only difference is instead of a battery the tool is powered by a wireline
and constant survey are provided by tool. The surveys are taken while running in or out of hole at every 100 feet.
• Rate Gyroscopic Orientation Survey AKA RGS-OR
In this survey we help the whipstock engineers orienting the whipstock or drillbit. At the bottom of hole they don’t
know which direction is their tool facing so we provide a realtime survey giving them the toolface.
• Rate-Gyroscopic Steering Survey
This survey is a type of LWD where we are constantly giving gyro toolface which is the same as the drillbit
toolface. As the MWD tool can’t give any survey in casing so gyro tools are used for providing a realtime toolface
while kickoff.
Other responsibilities include,
• Tool maintenance
• Survey Processing
• Final report making
• Client follow up
•Quality control of Polystyrene Material in expander and EPS Machines.
-Density control of the boxes
-Monitoring of expansion at EPS expanders
-Control of density and weight in the EPS machines
•Maintenance of 10 EPS Machines, Boiler and 2 Expanders
-Lead a team of 3 maintenance workers.
-Modifying EPS molding dies to market needed design and size
-Fabrication of die parts, machine parts etc
-Piping, Silo fabrication, cooling tower fabrication etc
-Daily and weekly maintenance of boiler
-Maintenance of EPS Expanders.
•Erection of 3 new EPS Machines.
-Did this project a year back.
-Installed new machines with Taiwanese Engineers.
-Design and fabrication of platform for new machines
-Supervised civil work done for new machines
•Erection and maintenance of Cooling Towers.
-Fabricated a new cooling tower for new machines
-Supervised the metal work/Machining for cooling tower
•Leading sales team and achieving sales targets.
-Setting sales target for sales team
-Achieved target as much as 100 tons
-Average collection percentage is 80.
-Setting up schemes and offers for customer attraction
-Marketing of the products
-Setting monthly new price for each finished product
•Logistics
-Scheduling daily deliveries
-Maintenance of all company vehicles
GPA: 3.4 on a scale of 4. Summer 2002: 8 weeks internship at Attock Refinery Limited(ARL) Rawalpindi, Pakistan Worked at Technical Services & Engineering Department. Observed and learnt the process of making & installation of High pressure vessels. Learnt the procedure of making oil storage tanks. Learnt series of test performed on different types of oils at Quality Control Laboratory. Worked at Planning & Development Department. Learnt how to take out a project as per ISO standards. Assisted in a project of putting up a new incinerator at Refinery site for disposal of Attock Hospital Limited.