Working as a planning engineer and a project manager in Core Network Division
Emirates Telecommunication Corporation-Etisalat, Abu Dhabi,
Total years of experience :21 years, 6 Months
Duties and Responsibilities:
• Coordinate with different core department to collect core backhauling requirements.
• Segregate the requirements as per geographical location.
• Design the protection schemes required according to the IP-Core Network plan and ensure the fulfilling of diversity routes.
• Prepare schematic drawing for the planned DWDM network.
• Choose the type of modulation (ODB, DPSK, eDQPSK, Coherent PolMux-QPSK, ..) which fulfill the OSNR budget while considering the rings configuration factor with most optimized financial aspect.
• Prepare all design documents including power/cooling requirements per site, fiber span lengths, traffic matrix, signal flow diagram & lambda source-destination allocation.
• Float tender among different suppliers.
• Review and evaluate different submitted bidders.
• Choose the better technical offer which fulfill the telecommunication standard and meet all project technical requirements.
• Review and follow all contractual agreement points.
• Coordinate and supervise the ongoing project implementation.
• Ensure the project progress is as per PIP (Project Implementation plan), and ensure the achievement of milestones.
• Follow up for project snags clearance.
• Proper closure of projects and handing over to operation.
• Review supplier payments as per contractual clauses.
• Preparing weekly/monthly report.
• Mapping of new core backhauling requirements on existing network.
• Customizations and augmentation of existing DWDM rings to match the dynamic change of network requirements.
• Keep updated with all new raising technology and study how to get used of it.
Duties and Responsibilities:
• Direct contact with customer for any troubleshooting.
• Supervise technicians for equipments H/W installation for any new system (SDH Microwave, SDH ADM, DXC and DWDM).
• Audit the Installation practice and ensure the quality that meets the telecommunication standards.
• Node commissioning and installing software.
• Insert the commissioned node within the network and ensure the compatibility.
• Upload the system into the NMS (Network management system).
• Perform the ATP (Acceptance Test Procedure).
• Prepare the system handover documents including (ring diagrams, signal flow diagram, traffic matrix, BoQ, design documents).
• Clear the snags which are raised by the customer.
• Ensure the project progress is as per PIP.
• Installation of HP-Servers.
• Unix software installation and configuration for servers.
• NMS software installation.
• Troubleshooting for any UNIX software problem.
• Keep updated with any new technology which is evolved.
Duties and Responsibilities:
• Supervise/Audit installation of Ericsson mobile GSM sites.
• Installation/commissioning for Ericsson PDH microwave.
• Installation/Commissioning for Ericsson RBS GSM system (RBS2202, RBS2204, RBS2206, RBS2208).
• Frequency allocation and commissioning for GSM site and insertion of new site within the network.
• Perform test calls on all 32 x time slots within a frequency and record logs.
• Fill in all ATP documents required to handover system to end-user.
• Attend site inspection jointly with customer representative.
• Clear any Snags raised by customer required for site acceptance.
• Trouble shooting for any H/W or S/W failure may happen to either GSM equipments (RBS), or the microwave (Minilink).
Duties and Responsibilities:
• Periodic Maintenance for all Photo printing machines within the company.
• Install and commission any new Machine.
• Operating the machine whenever required.
Duties and Responsibilities:
• Supervise all Electrical & PLC activity within a full automated steel rolling factory.
• Monitor PLC operation for any failure may happen.
• Extract all Logs from the system which shows the factory activity during the shift period.
• Analyze and resolve any malfunction which may occur during the rolling.
• Continuous study and change the PLC setting to adapt for the rolling activity to fulfill better rolling outcome in a short time.
• Periodic weekly and monthly maintenance for all factory electrical connection through a pre-defined maintenance activity plan.
• Formulate at end of each shift a technical report which include all activity performed during the shift, also include all problems occurred and how it had been solved.
BSc in Telecommunication Electrical Engineering Ain Shams University – Faculty of Engineering June 2002 University grade : Good Graduation Project: Design of High Speed Fax Modem using FPGA Technology Project grade : Distinction.