Total Years of Experience: 16 Years, 4 Months
November 2015
To Present
Freelance Interior Designer
at YP design
Location :
United Arab Emirates - Dubai
As part time job I am working as Interior designer where I have developed so far the following project:
- A modern studio flat in Moscow (Russia)
- A modern two bedroom flat in Dubai (UAE)
- A countryside villa in Rome (Italy)
The key tasks performed for each of these jobs are :
• Producing of a brief and developing the concept
• Designing floor plans, elevations, 3D views and material boards.
• Flooring, wallpapers, tiles, curtains & fabrics, furniture selection.
- A modern studio flat in Moscow (Russia)
- A modern two bedroom flat in Dubai (UAE)
- A countryside villa in Rome (Italy)
The key tasks performed for each of these jobs are :
• Producing of a brief and developing the concept
• Designing floor plans, elevations, 3D views and material boards.
• Flooring, wallpapers, tiles, curtains & fabrics, furniture selection.
July 2017
To Present
Accountant
at Charleston Consulting DMCC
Location :
United Arab Emirates - Dubai
I am working as an accountant in a small business development consultancy firm. My role consist primary in financial data collection, entry and report generation.
Key responsibility as per follow:
• Preparing and imputing to the system monthly company expenses.
• Preparing quarterly of the VAT return to the tax authority.
• Preparing annual Financial Audit documentations.
Key responsibility as per follow:
• Preparing and imputing to the system monthly company expenses.
• Preparing quarterly of the VAT return to the tax authority.
• Preparing annual Financial Audit documentations.
September 2013
To August 2015
Process Engineer
at ENI ENGINEERING E&P
Location :
United Kingdom
Brass LNG - Pre-Feed Concept Evaluation Study
Re-evaluation of the current concept LNG plant and associated storage and offloading facilities with respect to a change in liquefaction technology from Conoco/Philips Optimised Cascade process to APCI C3-MR Process.
Responsible for the design and development of offshore/onshore cases in accordance with all relevant HSE and operational specifications.
• Preparation of BFD, PFDs.
• Flare specification
• Utility consumption calculation
ENI FLNG Mozambique - FEED phase
Preparation to and participation in the P&ID Design Review as representative of Client side to Saipem contractor.
Review of Cargo Section P&IDs
Review of Warm Section P&IDs
Review of Cold Section P&IDs
Review of Fuel Gas P&IDs
Review of Flare P&IDs
Review of Utility P&IDs
Modularization
FPSO Modularisation Project. FEED (September 2013 - October 2014)
Worked on the design of standardised modules for various FPSO topside units. These include Gas Dehydration, Produced Water Treatment and the Seawater Treatment & Water Injection Unit.
• Responsible for the issuing of key process deliverables: P&IDs, PFDs, equipment list, H&MB,
• Developed Process Engineering Descriptions
• Process representative at the 3D Piping Model review.
Has gained experience with PFD, P&ID development, H&MB, line, control valve sizing. Has participated in the Design Review and HAZOP.
FPSO Zabazaba
Performed calculations and produced data sheets for the Gas Compression equipment’s.
Responsible for pumping calculations of the crude oil transfer pump.
Re-evaluation of the current concept LNG plant and associated storage and offloading facilities with respect to a change in liquefaction technology from Conoco/Philips Optimised Cascade process to APCI C3-MR Process.
Responsible for the design and development of offshore/onshore cases in accordance with all relevant HSE and operational specifications.
• Preparation of BFD, PFDs.
• Flare specification
• Utility consumption calculation
ENI FLNG Mozambique - FEED phase
Preparation to and participation in the P&ID Design Review as representative of Client side to Saipem contractor.
Review of Cargo Section P&IDs
Review of Warm Section P&IDs
Review of Cold Section P&IDs
Review of Fuel Gas P&IDs
Review of Flare P&IDs
Review of Utility P&IDs
Modularization
FPSO Modularisation Project. FEED (September 2013 - October 2014)
Worked on the design of standardised modules for various FPSO topside units. These include Gas Dehydration, Produced Water Treatment and the Seawater Treatment & Water Injection Unit.
• Responsible for the issuing of key process deliverables: P&IDs, PFDs, equipment list, H&MB,
• Developed Process Engineering Descriptions
• Process representative at the 3D Piping Model review.
Has gained experience with PFD, P&ID development, H&MB, line, control valve sizing. Has participated in the Design Review and HAZOP.
FPSO Zabazaba
Performed calculations and produced data sheets for the Gas Compression equipment’s.
Responsible for pumping calculations of the crude oil transfer pump.
November 2010
To February 2012
Production Engineering
at ENI E&P
Location :
Italy
As a Production Engineer in the Operation Problem Solving Department, I was responsible for assisting the Production Teams at various ENI production sites both in Italy (Terni, Ravenna etc.) and internationally (Gulf of Mexico, Congo, North Africa) to resolve a wide range of production and process issues.
As part of my role I was responsible also for the initial preparation, monitoring and forecasting of production budgets across different producing assets.
Duties within the role also include the following:
• Provide technical support to production operations on process optimisation, control, operating procedures and troubleshooting.
• Evaluate the operating performance of plants and recommends process changes and improvements
• Utilization of modelling software (i.e. HYSYS) as a primary means of process evaluation and prediction.
• Participation in HAZOP, HAZID, EIA, O&M to ensure effective Production/Operations Engineering input.
• Support the evaluation of the operating performance of plants and recommendations for process changes and improvements, utilizing available simulation tools.
As part of my role I was responsible also for the initial preparation, monitoring and forecasting of production budgets across different producing assets.
Duties within the role also include the following:
• Provide technical support to production operations on process optimisation, control, operating procedures and troubleshooting.
• Evaluate the operating performance of plants and recommends process changes and improvements
• Utilization of modelling software (i.e. HYSYS) as a primary means of process evaluation and prediction.
• Participation in HAZOP, HAZID, EIA, O&M to ensure effective Production/Operations Engineering input.
• Support the evaluation of the operating performance of plants and recommendations for process changes and improvements, utilizing available simulation tools.
November 2008
To November 2010
Process Engineer
at Agip KCO
Location :
Kazakhstan
I was responsible to support the Production Engineering Team through all phases of the Kashagan Field Development. Operations include technical input into EP, Tranche 3, and Full Field Development Project activities.
•I was also responsible to liaise with project engineering to optimize process and utility schemes of onshore and offshore facilities to achieve reliable and cost effective operation; to provide day to day process engineering operation requirements; to minimize safety, health and environmental risks.
•Duties within the role also include the following:
•Provide technical support to production operations on process optimisation, control, operating procedures and troubleshooting.
•Provide input, as requested by the team, into feasibility studies, options identification, evaluation and selection, field development plan and basis for design.
•Responsible for process engineering deliverables as assigned.
•Produce design sizing of Production Separators based on Operational criteria.
•Work done on produced water treatment and water balance for onshore and offshore facilities, including PFDs of the system.
•Participation in HAZOP, HAZID, EIA, O&M to ensure effective Production/operations engineering input.
•Support the evaluation of the operating performance of plants and recommendations for process changes and improvements, utilizing available simulating tools
•Ensure all the process related works for the facilities are handled in consistent standards such that the technical integrity is safeguarded.
•Develop effective interfaces with other Departments by maintaining an effective communication network with other functional groups.
•I was also responsible to liaise with project engineering to optimize process and utility schemes of onshore and offshore facilities to achieve reliable and cost effective operation; to provide day to day process engineering operation requirements; to minimize safety, health and environmental risks.
•Duties within the role also include the following:
•Provide technical support to production operations on process optimisation, control, operating procedures and troubleshooting.
•Provide input, as requested by the team, into feasibility studies, options identification, evaluation and selection, field development plan and basis for design.
•Responsible for process engineering deliverables as assigned.
•Produce design sizing of Production Separators based on Operational criteria.
•Work done on produced water treatment and water balance for onshore and offshore facilities, including PFDs of the system.
•Participation in HAZOP, HAZID, EIA, O&M to ensure effective Production/operations engineering input.
•Support the evaluation of the operating performance of plants and recommendations for process changes and improvements, utilizing available simulating tools
•Ensure all the process related works for the facilities are handled in consistent standards such that the technical integrity is safeguarded.
•Develop effective interfaces with other Departments by maintaining an effective communication network with other functional groups.
March 2006
To November 2008
Junior Production Allocation Engineer
at Agip KCO
Location :
Kazakhstan
I was responsible to support the team in delivering production allocation & accounting operational readiness and assurance deliverables ensuring all activities and deliverables are in place prior to commercial oil production.
During this period I had many on site visits to fully understand and familiarised with the on shore process plan facilities both in Kazakstan (Karachaganak Complex Petroleum) and abroad (Trecate Centro Olio - Italy, Val D’Agri Centro Olio - Italy, Livorno Gas and Power Plant - Italy.)
During this period I had many on site visits to fully understand and familiarised with the on shore process plan facilities both in Kazakstan (Karachaganak Complex Petroleum) and abroad (Trecate Centro Olio - Italy, Val D’Agri Centro Olio - Italy, Livorno Gas and Power Plant - Italy.)
Share on Facebook
Share on Twitter
Share Via Email