Total Years of Experience: 12 Years, 7 Months
June 2012
To October 2017
CAD manager/Technical coordinator
at Atkins
Location :
Qatar - Doha
Carry out technical operations in accordance with the company systems and resolve technical issues as they
occur.
Assist and update the Design Leads on resource requirements and delivery status on all assigned projects.
Undertake quality control in accordance with Ashghal standards and any specific project requirements.
Assist in the preparation of the Project set-up folders and the appropriate CAD standards that will guide the
preparation of the drawings.
Prepare estimates for the completion of required deliverable.
Review and coordination of all design/Shop drawing/As-buit related submissions by the contractor
Coordinate all technical queries with the team as well as the project design consultant Parson for Al-Jahhaniya
Interchange
Maintain register log of all incoming design changes initiated by the designer/client are coordinated,
Lead in the review and approval of contractor’s technical submissions/shop drawings in line with delivery
schedule requirements.
Identify any gaps or shortcomings and coordinate any necessary changes with the designer/client
Ensure that design interfaces both within the project R.O.W and with adjacent projects are properly coordinated
and documented.
Coordinate site based resources (Surveyors, Inspectors) to ensure efficient and effective deployment a cross site
Liaise with the SRE, RE, ARE and site Inspectors to ensure they are aware of potential changes to the design
and potential impact
Review contractor’s temporary works designs in coordination with the resident engineers and Coordinate with
health and safety manager/engineer for any design issues relating to safety of construction or operation
Liaise with contractors on a regular basis and build informal relationships whilst maintaining compliance with
formal communication routes adopted by the Supervision Consultant
Attend regular meetings and discussed with the contractor design engineer regarding the progress of projects and
about solving the problems that arose during implementation of the projects.
Provide feedback to Management regarding requirement of new software or modification of existing software
Complete all drafting assignments on schedule and within man-hour and cost budgets
Perform front-end layout and design of complex systems and equipment applicable to the respective discipline.
Perform interdisciplinary reviews and provides coordination of data to ensure a compatible design.
Provide direction to a team of checking personnel, ensuring the mathematical accuracy of the drawings
produced.
Responsible for the timely and quality production of scheme drawings for Dukhan Central Highway and
Upgrade of Al-Jahhaniya Interchange project.
occur.
Assist and update the Design Leads on resource requirements and delivery status on all assigned projects.
Undertake quality control in accordance with Ashghal standards and any specific project requirements.
Assist in the preparation of the Project set-up folders and the appropriate CAD standards that will guide the
preparation of the drawings.
Prepare estimates for the completion of required deliverable.
Review and coordination of all design/Shop drawing/As-buit related submissions by the contractor
Coordinate all technical queries with the team as well as the project design consultant Parson for Al-Jahhaniya
Interchange
Maintain register log of all incoming design changes initiated by the designer/client are coordinated,
Lead in the review and approval of contractor’s technical submissions/shop drawings in line with delivery
schedule requirements.
Identify any gaps or shortcomings and coordinate any necessary changes with the designer/client
Ensure that design interfaces both within the project R.O.W and with adjacent projects are properly coordinated
and documented.
Coordinate site based resources (Surveyors, Inspectors) to ensure efficient and effective deployment a cross site
Liaise with the SRE, RE, ARE and site Inspectors to ensure they are aware of potential changes to the design
and potential impact
Review contractor’s temporary works designs in coordination with the resident engineers and Coordinate with
health and safety manager/engineer for any design issues relating to safety of construction or operation
Liaise with contractors on a regular basis and build informal relationships whilst maintaining compliance with
formal communication routes adopted by the Supervision Consultant
Attend regular meetings and discussed with the contractor design engineer regarding the progress of projects and
about solving the problems that arose during implementation of the projects.
Provide feedback to Management regarding requirement of new software or modification of existing software
Complete all drafting assignments on schedule and within man-hour and cost budgets
Perform front-end layout and design of complex systems and equipment applicable to the respective discipline.
Perform interdisciplinary reviews and provides coordination of data to ensure a compatible design.
Provide direction to a team of checking personnel, ensuring the mathematical accuracy of the drawings
produced.
Responsible for the timely and quality production of scheme drawings for Dukhan Central Highway and
Upgrade of Al-Jahhaniya Interchange project.
November 2008
To June 2012
Cad Technician
at AECOM
Location :
United Arab Emirates - Abu Dhabi
Produce drawings using computer-assisted drafting systems (CAD)
Draft plans and detailed drawings for structures, installations, and construction projects such as highways, sewage disposal systems working from sketches or notes.
Draw maps, diagrams, and profiles, using cross-sections and surveys, to represent elevations, topographical contours, subsurface formations and structures.
Correlate, interpret, and modify data obtained from topographical surveys, well logs, and geophysical prospecting reports.
Review rough sketches, drawings, specifications, and other engineering data received from civil engineers to ensure that they conform to design concepts.
Preparation of Rail/LRT/MRT/Tram layouts and design guided by Engineers.
Preparation of Road profiles as per the standards & benchmarks.
Preparation of Road Marking and Road Signs Drawing
Development of detailed drawings, such as plan and sections for Roads Layouts for the proposed improvements in road profile
Junctions Improvement, Bus Lay bye for main roads, Design for Parking areas, Pedestrian crossing design, Traffic signal design, Road Maintenance works and utilities for all type of roads. Responsible includes preparing Layouts of Gravity sewer, surface water, Pressure pipe lines, Irrigation & Potable water. Civil and Mechanical works related to pumping stations, chambers and manholes.
Draughting Manhole sketches and spread sheets of Levels. Making Coordination Drawings for Potable Network, Irrigation Network, Electrical Network, Communication Utilities, Street lighting
Producing working drawing in line with the international design standard. Responsibilities include preparation of Concept Design, Schematic & Construction drawings, Detail drawing using Auto CAD.
Landscape:
Drafting all landscape packages & tenders for Al Raha Beach Eastern Precincts
Designing the Softscape and path layouts (with minimal input by Landscape designer) for Lu'Luat Boulevard and IC-6 Bridge & Intersection.
Providing construction details and sections in a technically accurate, yet visually presentable manner (Sometimes for Client / Local Authority Approval)
Preparing the layout for Landscape work including softscape & planting, hardscape paving, retaining walls, levels and grading
Final Drawing updates (based on designer / Client comments) and issuing officially to Document Control, sometimes within short deadlines.
Calculation of plant numbers and densities. Providing accurate summaries of hard surfacing for Bill of Quantities & Tender Pricing (with no mistakes)
Draft plans and detailed drawings for structures, installations, and construction projects such as highways, sewage disposal systems working from sketches or notes.
Draw maps, diagrams, and profiles, using cross-sections and surveys, to represent elevations, topographical contours, subsurface formations and structures.
Correlate, interpret, and modify data obtained from topographical surveys, well logs, and geophysical prospecting reports.
Review rough sketches, drawings, specifications, and other engineering data received from civil engineers to ensure that they conform to design concepts.
Preparation of Rail/LRT/MRT/Tram layouts and design guided by Engineers.
Preparation of Road profiles as per the standards & benchmarks.
Preparation of Road Marking and Road Signs Drawing
Development of detailed drawings, such as plan and sections for Roads Layouts for the proposed improvements in road profile
Junctions Improvement, Bus Lay bye for main roads, Design for Parking areas, Pedestrian crossing design, Traffic signal design, Road Maintenance works and utilities for all type of roads. Responsible includes preparing Layouts of Gravity sewer, surface water, Pressure pipe lines, Irrigation & Potable water. Civil and Mechanical works related to pumping stations, chambers and manholes.
Draughting Manhole sketches and spread sheets of Levels. Making Coordination Drawings for Potable Network, Irrigation Network, Electrical Network, Communication Utilities, Street lighting
Producing working drawing in line with the international design standard. Responsibilities include preparation of Concept Design, Schematic & Construction drawings, Detail drawing using Auto CAD.
Landscape:
Drafting all landscape packages & tenders for Al Raha Beach Eastern Precincts
Designing the Softscape and path layouts (with minimal input by Landscape designer) for Lu'Luat Boulevard and IC-6 Bridge & Intersection.
Providing construction details and sections in a technically accurate, yet visually presentable manner (Sometimes for Client / Local Authority Approval)
Preparing the layout for Landscape work including softscape & planting, hardscape paving, retaining walls, levels and grading
Final Drawing updates (based on designer / Client comments) and issuing officially to Document Control, sometimes within short deadlines.
Calculation of plant numbers and densities. Providing accurate summaries of hard surfacing for Bill of Quantities & Tender Pricing (with no mistakes)
March 2005
To September 2008
CAD designer – Architecture and Structural
at Avs consultants
Location :
India - Hyderabad
Designing of the plant layout as per the land area
Process planning for construction to be manufactured
Municipal Drawings of India
Functional analysis of Structural drawings
Collecting all drawing detail for the entire project
Preparation of layout and foundation drawings
Daily meeting with the design
Clarifying the dough’s with engineer adding own ideas for any changes.
Structural Work :
Coloum centre lining
Footings with details given by the Engineer
Plint beam, Beam layout, slab steel
Details of the beam lay out with extra rods.
Process planning for construction to be manufactured
Municipal Drawings of India
Functional analysis of Structural drawings
Collecting all drawing detail for the entire project
Preparation of layout and foundation drawings
Daily meeting with the design
Clarifying the dough’s with engineer adding own ideas for any changes.
Structural Work :
Coloum centre lining
Footings with details given by the Engineer
Plint beam, Beam layout, slab steel
Details of the beam lay out with extra rods.
Share on Facebook
Share on Twitter
Share Via Email