Registered Master Electrician (QC Technician)
AL ABDULKARIM HOLDING CO.
Total years of experience :18 years, 5 Months
• Engineering and Production Department (EPD)
1. Control wiring
2. Low, Medium and High Voltage switchgear experience
3. Testing and commissioning
4. Knowledge in VFD and PLC
5. Lighting fixture/Building wiring
6. Trouble shooting
7. Lighting fixture
8. Computer literate Excel/word
9. Quality control
10. Knowledge in Basic AUTOCAD
11. Knowledge in Word/Excel
• Conduct testing to make sure that the product is functioning and fully tested
• Conduct insulation testing to make sure that the product is fully isolated
Conduct in-line testing of product and equipment as necessary and to issue the corrected as manufactured drawings to the Design department.
Making checklist for the completed and tested product.
Report the final testing result of the product & equipment to the Quality Control Manager.
• Perform PDI (Pre - Delivery Inspection) for final testing and inspection of customer and assist Project Manager / Design office in finalizing the customer comments.
• Conduct inspection of completed installation to ensure conformance to design, specification and comply the safety standard.
• Study technical drawings and specification of electrical system.
• Submit reports to the supervisor and customer every development and completed works at site daily.
• Attend customer’s complaints, identify root cause of problem and recommend remedial actions.
• Conduct site inspection and prepare project management schedule.
• Prepare bill of materials needed in projects.
• Ensure cleanliness and safety of the working area by maintaining good housekeeping. Make sure that all safety devices are in good condition and that the company rules and regulations are observed.
Date: November 2008 - December 2012
Company: RMR Electric Corporation
Location:New add. #20 Sumulong Highway Brgy. Mayamot Antipolo City
Position: Technical Staff /Technical Servicing and Site safety Officer
Duties and Responsibilities:
● Power and Energy Monitoring & Encoding ( Electric Consumption & Water Consumption)
● Ensure cleanliness and safety of the working area by maintaining good housekeeping. Make sure that all safety devices are in good condition and that the company rules and regulations are observed.
● Responsible for the availability of materials, components and spare parts of all equipment, instruments and other automated controller.
● Motor control wiring, modifications, trouble shooting, installation and preventive maintenance. ( Full Voltage & Wye-Delta)
● Wiring of Capacitor Bank and power wiring of Capacitors, including layout of components to Testing & Commissioning.
● Simulation of motor control is tested for each operation before it hooks up to its rotating equipment.
● Layout of components & others instrument such as contactors, overload relays, pilot lights, breakers, push buttons.
● Testing of ATS sequence, PLC program, Protection Relay, Current and Voltage Transformer, Functional and operation of MV & LV switchgear in accordance with IEC, NEMA & NETA Standard.
● Testing of Motor Control Center ( Direct on line, Wye-Delta, Autotrans Controller, Alti-Start and Variable frequency drive) operation.
● Check and maintain in good condition of all machine functions, electrical equipment and connections, firefighting equipment and alarm safety and security related matters.
● Repairing and troubleshooting of all different kinds of fabrication equipments and hydraulic machines such as Hydraulic busbar cutter and bender, shearing machines, power press and other Automatic Controlled machines.
● Design electrical control circuit such as motor control, temperature control circuit, emergency alarm and other automatic control circuit.
● Reading, interpreting and Wiring of Schematic, Control, pneumatic diagram and electrical code specification to determine wiring layouts for new or existing installation.
● Hi-potential testing is performed to ensure conductivity of lugs connections, tapping solidity of cable, etc.
● High voltage, Medium Voltage cable splicing, tapping and termination using 3M Tape Method.
● Parameter setting, installation and troubleshooting of Variable Frequency Drive, Smart relay, different type of sensors and limit switches, Thermo controller, Timer, Contact relays, Magnetic contactor, different type of heater and other electrical electronics components required in the field of production.
● Protective breaker, overload relay and Micrologic trip unit is adjusted to its operational tripping load.
● Troubleshooting, repair, replace, installation and rewinding of motors, welding machines, transformers, synchronous motors and other electrical tools.
● Inspect the Product & Equipment such as MV & LV switchgear based on inspection checklist, Electrical Drawings in accordance with IEC & NEMA Standard.
● Conduct in-line testing of product and equipment as necessary and to issue the corrected as manufactured drawings to the Design department.
● Making checklist for the completed and tested product.
● Report the final testing result of the product & equipment to the Quality Control Manager.
● Handling several projects committed to improved production output, line efficiency, and enhancing other technicians to develop skills to new equipment.
● Ensuring that all electrical components that is being used in MV & LV switchgear have passed all the necessary testing. ( Hi - Potential and isolation test)
• Raise clarifications to concerned section for any wrong or incomplete design and to raise non-conformity for defective components.
• Perform PDI ( Pre - Delivery Inspection) for final testing and inspection of customer and assist Project Manager / Design office in finalizing the customer comments.
• Lay-out and installation of cable trays, conduits, cable pulling, direct burial cable, etc. ( This is done at work site)
• Sharing of ideas, information is suggested to have a highly motivated workforce, excellent work attitude, technically equipped and with quality in mind.
• Assist in implementation of modifications (where needed) and in the installation and commissioning of new equipment, instruments and other automated machines.
• Ensuring that all electrical components that is being used in MV & LV switchgear have passed all the necessary testing.
• Ensure that the test format shall be stamped with QC visa at the end of testing.
• Attend meetings with customer, sub-contractor and others to discuss existing projects
• Project implementation.
• Coordinate to other contractors any activity at site such as construction, installation and maintenance.
• Involved in electrical equipment testing to ensure compliance in specification and meet the customer requirements
• Conduct inspection of completed installation to ensure conformance to design, specification and comply to the safety standard.
• Study technical drawings and specification of electrical system.
• Submit reports to the supervisor and customer every development and completed works at site daily.
• Attend customer's complaints, identify root cause of problem and recommend remedial actions.
• Conduct site inspection and prepare project management schedule.
• Prepare bill of materials needed in projects.
• Ensure cleanliness and safety of the working area by maintaining good housekeeping. Make sure that all safety devices are in good condition and that the company rules and regulations are observed.
Seminar attended April 1, 2012
• Construction Safety and Health Course for site Safety officer
Date: May 2008-October 2008
Company: Exito Electronics phils., inc
Location:14435 Governors drive bancal, carmona cavite
Position: Machine operator/Maintenance
• Trouble shooting of molding machine
• Operator
Date: December 2005-January 2008
Position: Freelance Technical consultant
• Installion of motor control
• Cable Pulling
• Control wiring, ATS, VFD, Power meter
• Building wiring
Date: June 2005- September 2005
Company:Voltage Electric
Location: Taguig, Metro Manila
Position: On-the-Job Trainee,
Duties and Responsibilities:
• Motor Control Wiring & Trouble Shooting ( Full Voltage & Wye-Delta)
Layout of components & others instrument such as contactors, overload
relays, pilot lights, breakers, push buttons.
• Repair and maintenance of electrical devices use in industrial machines such as Hydraulic bender, Shearing Machine, Power press.
• Replacement of defective or broken components of all electrical equipment.
• Provision and installation of motor control panel board.
• Electrical maintenance ( replacement of lighting fixture, defective fluorescent, telephone malfunction)
• Building wiring
Date: June 2005- September 2005
Company:Voltage Electric
Location: Taguig, Metro Manila
Position: On-the-Job Trainee,
Duties and Responsibilities:
• Motor Control Wiring & Trouble Shooting ( Full Voltage & Wye-Delta)
Layout of components & others instrument such as contactors, overload
relays, pilot lights, breakers, push buttons.
• Repair and maintenance of electrical devices use in industrial machines such as Hydraulic bender, Shearing Machine, Power press.
• Replacement of defective or broken components of all electrical equipment.
• Provision and installation of motor control panel board.
• Electrical maintenance ( replacement of lighting fixture, defective fluorescent, telephone malfunction)
• Building wiring
Date: December 2005-January 2008
Position: Freelance Technical consultant
• Installion of motor control
• Cable Pulling
• Control wiring, ATS, VFD, Power meter
• Building wiring
Date: May 2008-October 2008
Company: Exito Electronics phils., inc
Location:14435 Governors drive bancal, carmona cavite
Position: Machine operator/Maintenance
• Trouble shooting of molding machine
• Operator
Date: November 2008 - December 2012
Company: RMR Electric Corporation
Location:New add. #20 Sumulong Highway Brgy. Mayamot Antipolo City
Position: Technical Staff /Technical Servicing and Site safety Officer
Duties and Responsibilities:
● Power and Energy Monitoring & Encoding ( Electric Consumption & Water Consumption)
● Ensure cleanliness and safety of the working area by maintaining good housekeeping. Make sure that all safety devices are in good condition and that the company rules and regulations are observed.
● Responsible for the availability of materials, components and spare parts of all equipment, instruments and other automated controller.
● Motor control wiring, modifications, trouble shooting, installation and preventive maintenance. ( Full Voltage & Wye-Delta)
● Wiring of Capacitor Bank and power wiring of Capacitors, including layout of components to Testing & Commissioning.
● Simulation of motor control is tested for each operation before it hooks up to its rotating equipment.
● Layout of components & others instrument such as contactors, overload relays, pilot lights, breakers, push buttons.
● Testing of ATS sequence, PLC program, Protection Relay, Current and Voltage Transformer, Functional and operation of MV & LV switchgear in accordance with IEC, NEMA & NETA Standard.
● Testing of Motor Control Center ( Direct on line, Wye-Delta, Autotrans Controller, Alti-Start and Variable frequency drive) operation.
● Check and maintain in good condition of all machine functions, electrical equipment and connections, firefighting equipment and alarm safety and security related matters.
● Repairing and troubleshooting of all different kinds of fabrication equipments and hydraulic machines such as Hydraulic busbar cutter and bender, shearing machines, power press and other Automatic Controlled machines.
● Design electrical control circuit such as motor control, temperature control circuit, emergency alarm and other automatic control circuit.
● Reading, interpreting and Wiring of Schematic, Control, pneumatic diagram and electrical code specification to determine wiring layouts for new or existing installation.
● Hi-potential testing is performed to ensure conductivity of lugs connections, tapping solidity of cable, etc.
● High voltage, Medium Voltage cable splicing, tapping and termination using 3M Tape Method.
● Parameter setting, installation and troubleshooting of Variable Frequency Drive, Smart relay, different type of sensors and limit switches, Thermo controller, Timer, Contact relays, Magnetic contactor, different type of heater and other electrical electronics components required in the field of production.
● Protective breaker, overload relay and Micrologic trip unit is adjusted to its operational tripping load.
● Troubleshooting, repair, replace, installation and rewinding of motors, welding machines, transformers, synchronous motors and other electrical tools.
● Inspect the Product & Equipment such as MV & LV switchgear based on inspection checklist, Electrical Drawings in accordance with IEC & NEMA Standard.
● Conduct in-line testing of product and equipment as necessary and to issue the corrected as manufactured drawings to the Design department.
● Making checklist for the completed and tested product.
● Report the final testing result of the product & equipment to the Quality Control Manager.
● Handling several projects committed to improved production output, line efficiency, and enhancing other technicians to develop skills to new equipment.
● Ensuring that all electrical components that is being used in MV & LV switchgear have passed all the necessary testing. ( Hi - Potential and isolation test)
• Raise clarifications to concerned section for any wrong or incomplete design and to raise non-conformity for defective components.
• Perform PDI ( Pre - Delivery Inspection) for final testing and inspection of customer and assist Project Manager / Design office in finalizing the customer comments.
• Lay-out and installation of cable trays, conduits, cable pulling, direct burial cable, etc. ( This is done at work site)
• Sharing of ideas, information is suggested to have a highly motivated workforce, excellent work attitude, technically equipped and with quality in mind.
• Assist in implementation of modifications (where needed) and in the installation and commissioning of new equipment, instruments and other automated machines.
• Ensuring that all electrical components that is being used in MV & LV switchgear have passed all the necessary testing.
• Ensure that the test format shall be stamped with QC visa at the end of testing.
• Attend meetings with customer, sub-contractor and others to discuss existing projects
• Project implementation.
• Coordinate to other contractors any activity at site such as construction, installation and maintenance.
• Involved in electrical equipment testing to ensure compliance in specification and meet the customer requirements
• Conduct inspection of completed installation to ensure conformance to design, specification and comply to the safety standard.
• Study technical drawings and specification of electrical system.
• Submit reports to the supervisor and customer every development and completed works at site daily.
• Attend customer's complaints, identify root cause of problem and recommend remedial actions.
• Conduct site inspection and prepare project management schedule.
• Prepare bill of materials needed in projects.
• Ensure cleanliness and safety of the working area by maintaining good housekeeping. Make sure that all safety devices are in good condition and that the company rules and regulations are observed.
Date: January 2013- Present
Company: AL ABDULKARIM HOLDING CO.
Location: King Fahad St. corner Ali bin Abi Talib St.
P.O Box 845 Dammam KSA
Position: Testing and Quality Control
Duties and Responsibilities:
• Conduct testing to make sure that the product is functioning and fully tested
• Conduct insulation testing to make sure that the product is fully isolated
● Conduct in-line testing of product and equipment as necessary and to issue the corrected as manufactured drawings to the Design department.
● Making checklist for the completed and tested product.
● Report the final testing result of the product & equipment to the Quality Control Manager.
• Perform PDI (Pre - Delivery Inspection) for final testing and inspection of customer and assist Project Manager / Design office in finalizing the customer comments.
• Conduct inspection of completed installation to ensure conformance to design, specification and comply the safety standard.
• Study technical drawings and specification of electrical system.
• Submit reports to the supervisor and customer every development and completed works at site daily.
• Attend customer's complaints, identify root cause of problem and recommend remedial actions.
• Conduct site inspection and prepare project management schedule.
• Prepare bill of materials needed in projects.
• Ensure cleanliness and safety of the working area by maintaining good housekeeping. Make sure that all safety devices are in good condition and that the company rules and regulations are observed.
Skills
• Computer Literate. ( Microsoft office, word, excel, pms, power point)
• Can do busburing works such us measuring, layout and installation.
• Operation of different kinds of Electrical Test Equipments.
*15 KV Hi-Potential Tester Vary from 0 - 15, 000 Volts Direct Current
Model: Associated Research Incorporated
* NW Full Function Test Kit 33595
Model: Merlin Gerin
* DS Breaker Test Kit 0-100 Amperes
Model: Cuttler Hummer
* Insulation Resistance Tester 0 - 5, 000 Volts Direct Current
Model: KYORITSU 3125
* Multi - Amp Tester SR-5-4 & SR 51-4
Model: Multi-Amp Corporation
* Fluke Clamp Tester
• Set-up and Configuration of Digital Metering.
* Power Logic ION Metering Brand: Schneider Electric
* Power Metering Series Brand: Schneider Electric
* SEPAM Series Protective Relay Brand: Schneider Electric
• Knowledgeable in AutoCAD ver.2010.
School: Ernesto Rondon High School Year Completed: 2002 College Level
School: Quezon City Polytechnic University Course: Electrical Engineering Technology Year Completed: 2006