Total Years of Experience: 8 Years, 8 Months
March 2015
To August 2016
SNR. WELDING/NDT INSPECTOR (QA/QC ENGINEER)
at SHELL PETROLEUM DEVELOPMENT COMPANY LIMITED
Location :
Nigeria
SHELL PETROLEUM DEVELOPMENT COMPANY OF NIGERIA LIMITED March, 2015 to date
Position: Senior Certified Welding/NDT Inspector (AWS CWI)
Project:Gbaran Infill Project - NLNG Gas Supplies Project (Installations of Pipelines and Intersite Composite Cables).
Scope of work: The design, procurement, fabrication, construction, Installation, hook-ups, pre-commissioning for the following:
•8km x 10-inch carbon steel pipeline from EPU TKVH-1/TXVE-2 (EPU-1 manifold) to EPU-2 DSS header at Koroama (across a major and medium river) complete with associated end-facilities.
•4.2km x 10-inch flow line from the Koroama SPUU-1 well location to the Koroama NAG manifold extension (across a medium river) with associated end-facilities.
•5.5km x 8-inch carbon steel pipeline from the Koroama-002 well location to Gbaran CPF with the associated end-facilities.
•5.5km x 8-inch carbon steel pipeline from the EPU TXVE-3 well site to the EPU-2 DSS manifold at Koroama (across medium river) complete with the associated facilities.
•4.5km x 6-inch carbon steel flow line from the Gbaran VZTX-2 well location to Gbaran Oil/NAG manifold location with associated end-facilities.
•Two 6km x 12-inch carbon steel pipelines from the Koroama NAG manifold extension to the Gbaran
CPF(Crude Processing Facility) including associated end facilities.
Responsibilities:
•Review of formulated WPS and PQR documentation to ensure they comply with specification/standard prior to site implementation, monitor welder’s certification,
•Perform surveillance at the field along the ROW and at the shop to verify welding activities are carried out as per the QC procedures, ITPs, Method statement and line with project specifications for all pipelines, flowlines, risers, wellhead hook-up arms, inlet ligaments and manifolds.
•Conduct stage inspection during Welder Qualification, Welding/fabrication as per ITP, Quality Plan and communicate report to team members.
•Interpretation of weld radiographs, review of NDT reports and compute weld repair rates.
•Involved in Contractor’s soil resistivity survey for sacrificial anode cathodic protection design and installation.
•Notify non-conformances detected during site inspections and recommend corrective measures.
•Ensure that the requirements for all weld, welder and welding activities are correctly specified and carried out in accordance with relevant codes, specifications and contract standards.
•Fit up inspection, ensuring that the joints are properly cleaned prior to welding to eliminate contamination of the weld. Inspection and monitoring of welding consumables to ensure that they are properly stored and handled.
•Ensuring that the welding parameters welding voltage/ current are maintained according to the WPS.
•Review of NDT reports to ensure they comply with the relevant standards and prepare repair methodology and appropriate remedial action for any non-compliance, anomalies and defects.
Position: Senior Certified Welding/NDT Inspector (AWS CWI)
Project:Gbaran Infill Project - NLNG Gas Supplies Project (Installations of Pipelines and Intersite Composite Cables).
Scope of work: The design, procurement, fabrication, construction, Installation, hook-ups, pre-commissioning for the following:
•8km x 10-inch carbon steel pipeline from EPU TKVH-1/TXVE-2 (EPU-1 manifold) to EPU-2 DSS header at Koroama (across a major and medium river) complete with associated end-facilities.
•4.2km x 10-inch flow line from the Koroama SPUU-1 well location to the Koroama NAG manifold extension (across a medium river) with associated end-facilities.
•5.5km x 8-inch carbon steel pipeline from the Koroama-002 well location to Gbaran CPF with the associated end-facilities.
•5.5km x 8-inch carbon steel pipeline from the EPU TXVE-3 well site to the EPU-2 DSS manifold at Koroama (across medium river) complete with the associated facilities.
•4.5km x 6-inch carbon steel flow line from the Gbaran VZTX-2 well location to Gbaran Oil/NAG manifold location with associated end-facilities.
•Two 6km x 12-inch carbon steel pipelines from the Koroama NAG manifold extension to the Gbaran
CPF(Crude Processing Facility) including associated end facilities.
Responsibilities:
•Review of formulated WPS and PQR documentation to ensure they comply with specification/standard prior to site implementation, monitor welder’s certification,
•Perform surveillance at the field along the ROW and at the shop to verify welding activities are carried out as per the QC procedures, ITPs, Method statement and line with project specifications for all pipelines, flowlines, risers, wellhead hook-up arms, inlet ligaments and manifolds.
•Conduct stage inspection during Welder Qualification, Welding/fabrication as per ITP, Quality Plan and communicate report to team members.
•Interpretation of weld radiographs, review of NDT reports and compute weld repair rates.
•Involved in Contractor’s soil resistivity survey for sacrificial anode cathodic protection design and installation.
•Notify non-conformances detected during site inspections and recommend corrective measures.
•Ensure that the requirements for all weld, welder and welding activities are correctly specified and carried out in accordance with relevant codes, specifications and contract standards.
•Fit up inspection, ensuring that the joints are properly cleaned prior to welding to eliminate contamination of the weld. Inspection and monitoring of welding consumables to ensure that they are properly stored and handled.
•Ensuring that the welding parameters welding voltage/ current are maintained according to the WPS.
•Review of NDT reports to ensure they comply with the relevant standards and prepare repair methodology and appropriate remedial action for any non-compliance, anomalies and defects.
August 2013
To December 2013
CAREER DEVELOPMENT COURSES
at IQI LTD INDIA
CAREER DEVELOPMENT COURSES / CERTIFICATIONS / TRAINING ATTENDED: S/No. TRAININGS / CERTIFICATIONS COMPANY CONSULTANT DATE
A AWS CWI (Certified Welding Inspector/Engineer) SELF IQI LTD INDIA ONGOING
B ASNT LEVEL II (VT, MT, PT, UT, RT and RFI) LEL GENNESARET August/December, 2013
C Marine Journey Management Training Course SPDC March, 2012
D Permit To Work System Training/ Course SPDC May, 2012
A AWS CWI (Certified Welding Inspector/Engineer) SELF IQI LTD INDIA ONGOING
B ASNT LEVEL II (VT, MT, PT, UT, RT and RFI) LEL GENNESARET August/December, 2013
C Marine Journey Management Training Course SPDC March, 2012
D Permit To Work System Training/ Course SPDC May, 2012
August 2012
To October 2012
AFAM F5 RESERVOIR DEVELOPMENT PROJECT
at FLOWLINE CONSTRUCTION
SODA/ DOMGAS PROJECTS: AFAM F5 RESERVOIR DEVELOPMENT PROJECT SLOT SPDC ONGOING
AWOBA NW 1 FLOWLINE CONSTRUCTION 4" X 5KM L/S LAVIE SPDC/ ABBEYCOURT AUGUST-OCTOBER, 2012
CONSTRUCTION AND INSTALLATION OF A 10" X 1.6KM PIPELINE FROM FUN MANIFOLD TO MOBIL QIT (Fiber Optic Cable- FOC, Laying on PVC Ebonite Duct along the Pipeline)
VESL
AWOBA NW 1 FLOWLINE CONSTRUCTION 4" X 5KM L/S LAVIE SPDC/ ABBEYCOURT AUGUST-OCTOBER, 2012
CONSTRUCTION AND INSTALLATION OF A 10" X 1.6KM PIPELINE FROM FUN MANIFOLD TO MOBIL QIT (Fiber Optic Cable- FOC, Laying on PVC Ebonite Duct along the Pipeline)
VESL
April 2009
To June 2012
Project /Bid Engineer
at VANDREZZER ENERGY SERVICES LIMITED
Location :
India
VANDREZZER ENERGY SERVICES LIMITED,
Position: Project /Bid Engineer 1 April, 2009 - 9 June, 2012
Responsibilities:
♦ Prepared a winning bid/tender for CONSTRUCTION AND INSTALLATION OF FUN GROUP FACILITIES AT MPN QUA IBOE TERMINAL, AKWA IBOM STATE, NIGERIA.
♦ Prepare bids for ADDAX TB 2909; ADDAX TB 3048; SEPLAT OVHOR Manifold Construction & Installation; FUN Ekid Gas Plant Construction.
♦ Monitoring of project performance against time, quality and budget.
♦ Initiate actions to mitigate schedule slips, cost overruns and quality challenges.
♦ Involved in Nipex NJQS pre-qual using the Nipex NJQS Audit Module.
♦ Measured project progress against planned and report status (S-curve)
♦ Attend Project progress and technical review meetings and reporting.
♦ Carryout project planning, budget prepare, project control, progress follow-ups and reporting.
♦ Prepare invoices / WCC/SO for client and sub-contractors base on approved contract milestone payment.
♦ Update/Review of existing construction drawings, documentation and contractor supervision.
♦ Support in project scoping, site visits/inspections, integrity checks, project kick-off/call-off contract meetings and premob of equipment.
♦ Ensure that client's technical requirements/specifications are met, co-ordinate the project technical team by means of regular meetings, interface control, design monitoring, quality control, milestones review, and project files maintenance.
♦ Prepare contract mobilization package (work schedule, work scopes, work method statement, HSE plan, Security plan, ITPs, Sleeving procedure, Hydro-test procedure, JHA, quality plans, etc)
♦ Review of PFDs, GAs, ISO Drawings, As-Built drawings and prepare MTOs from drawings; QA/QC project documents, prepare WPQT, WPS and PQR for pipeline welding and mechanical modification works, project execution plans and procedures, and take up other responsibilities as assigned by superiors at various site locations.
♦ Perform capacity checks as required by the project with the goal of identifying capacity constraints and debottlenecking solutions.
♦ Provide Construction expertise during risk assessments, HAZOPS, and incident investigations.
♦ Provide guidance to construction activities regarding design requirement, variations and operation changes to improve performance, reduce schedule slips or to reduce HSE exposures.
♦ Observing strictly the provisions of the PTW
♦ Plan all works daily and in advance, giving particular emphasis to work scopes and job hazards.
♦ Pre-commissioning, pre-startup and commissioning of the pipeline and common facilities.
WEST ATLANTIC SHIPYARD (WAS)
Position: Project /Bid Engineer 1 April, 2009 - 9 June, 2012
Responsibilities:
♦ Prepared a winning bid/tender for CONSTRUCTION AND INSTALLATION OF FUN GROUP FACILITIES AT MPN QUA IBOE TERMINAL, AKWA IBOM STATE, NIGERIA.
♦ Prepare bids for ADDAX TB 2909; ADDAX TB 3048; SEPLAT OVHOR Manifold Construction & Installation; FUN Ekid Gas Plant Construction.
♦ Monitoring of project performance against time, quality and budget.
♦ Initiate actions to mitigate schedule slips, cost overruns and quality challenges.
♦ Involved in Nipex NJQS pre-qual using the Nipex NJQS Audit Module.
♦ Measured project progress against planned and report status (S-curve)
♦ Attend Project progress and technical review meetings and reporting.
♦ Carryout project planning, budget prepare, project control, progress follow-ups and reporting.
♦ Prepare invoices / WCC/SO for client and sub-contractors base on approved contract milestone payment.
♦ Update/Review of existing construction drawings, documentation and contractor supervision.
♦ Support in project scoping, site visits/inspections, integrity checks, project kick-off/call-off contract meetings and premob of equipment.
♦ Ensure that client's technical requirements/specifications are met, co-ordinate the project technical team by means of regular meetings, interface control, design monitoring, quality control, milestones review, and project files maintenance.
♦ Prepare contract mobilization package (work schedule, work scopes, work method statement, HSE plan, Security plan, ITPs, Sleeving procedure, Hydro-test procedure, JHA, quality plans, etc)
♦ Review of PFDs, GAs, ISO Drawings, As-Built drawings and prepare MTOs from drawings; QA/QC project documents, prepare WPQT, WPS and PQR for pipeline welding and mechanical modification works, project execution plans and procedures, and take up other responsibilities as assigned by superiors at various site locations.
♦ Perform capacity checks as required by the project with the goal of identifying capacity constraints and debottlenecking solutions.
♦ Provide Construction expertise during risk assessments, HAZOPS, and incident investigations.
♦ Provide guidance to construction activities regarding design requirement, variations and operation changes to improve performance, reduce schedule slips or to reduce HSE exposures.
♦ Observing strictly the provisions of the PTW
♦ Plan all works daily and in advance, giving particular emphasis to work scopes and job hazards.
♦ Pre-commissioning, pre-startup and commissioning of the pipeline and common facilities.
WEST ATLANTIC SHIPYARD (WAS)
February 2012
To June 2012
at FUN GROUP
Location :
India
FUN GROUP
Feb. - June, 2012
DESIGN, PROCUREMENT, OFF SITE FABRICATION AND CONSTRUCTION OF WELLHEAD DECK STRUCTURE AND A 6"X15KM FLOWLINE FROM AKEPO - 1 WELL TO BENIBOYE FLOWSTATION.
"
SOGENAL /
OANDO
& EXILE RESOURCES
NOV. 2011 CONSTRUCTION OF WELLHEAD PLATFORM & HOOK-UP OF SOKU DCOO-1 FLOWLINE 6"X 3.50KM " SPDC JUNE, 2011
Feb. - June, 2012
DESIGN, PROCUREMENT, OFF SITE FABRICATION AND CONSTRUCTION OF WELLHEAD DECK STRUCTURE AND A 6"X15KM FLOWLINE FROM AKEPO - 1 WELL TO BENIBOYE FLOWSTATION.
"
SOGENAL /
OANDO
& EXILE RESOURCES
NOV. 2011 CONSTRUCTION OF WELLHEAD PLATFORM & HOOK-UP OF SOKU DCOO-1 FLOWLINE 6"X 3.50KM " SPDC JUNE, 2011
May 2011
To June 2011
at CONSTRUCTION & REPLACEMENT OF FLOWLINES IN PES
CONSTRUCTION OF 4" X 4KM GAS BULKLINE FROM SOKU GAS PLANT TO SOKU FLOW STATION. " SPDC MAY / JUNE 2011
SOKU W36 & W38 OPTIC FIBRE CABLE REPAIR AND EXCAVATION PROJECT. " " MAY, 2011
CONSTRUCTION & REPLACEMENT OF FLOWLINES IN PES 1 & 2 AREAS-III (3), NEMBE W48 L/S 4"X 3.05KM. " " FEBRUARY, 2011
SOKU W36 & W38 OPTIC FIBRE CABLE REPAIR AND EXCAVATION PROJECT. " " MAY, 2011
CONSTRUCTION & REPLACEMENT OF FLOWLINES IN PES 1 & 2 AREAS-III (3), NEMBE W48 L/S 4"X 3.05KM. " " FEBRUARY, 2011
April 2011
To April 2011
at Gas Testing and Breathing Apparatus
E Helicopter Underwater Escape Course (HUET) VESL MAERSK/ OPEANS April, 2011
F Offshore safety / Survival at Sea Course (SAS) " MAERSK / OPEANS April, 2011
G Gas Testing and Breathing Apparatus, NISP/SPDC " - Dec, 2010
F Offshore safety / Survival at Sea Course (SAS) " MAERSK / OPEANS April, 2011
G Gas Testing and Breathing Apparatus, NISP/SPDC " - Dec, 2010
September 2010
To September 2010
at CONSTRUCTION & REPLACEMENT OF FLOWLINES IN PES
CONSTRUCTION & REPLACEMENT OF FLOWLINES IN PES 1 & 2 AREAS-III (3), NEMBE W63 L/S 4"X 4.68KM. " " SEPTEMBER, 2010
FLOWLINE REPLACEMENT FOR AKASO W7L, 4" X 4.5KM. " " JULY 2010
WELLHEAD PLATFORM REPAIRS AND INTEGRITY CHECKS FOR EKULAMA 40T. " " May, 2010
FLOWLINE REPLACEMENT AND MECHANICAL MODIFICATIONS FOR EKULAMA W27S, 4" X 0.72KM. " " April, 2010
FLOWLINE SECTIONAL REPLACEMENT FOR EKULAMA W35S, 4" X 1.73KM. " " March, 2010
FLOWLINE REPLACEMENT FOR AKASO W7L, 4" X 4.5KM. " " JULY 2010
WELLHEAD PLATFORM REPAIRS AND INTEGRITY CHECKS FOR EKULAMA 40T. " " May, 2010
FLOWLINE REPLACEMENT AND MECHANICAL MODIFICATIONS FOR EKULAMA W27S, 4" X 0.72KM. " " April, 2010
FLOWLINE SECTIONAL REPLACEMENT FOR EKULAMA W35S, 4" X 1.73KM. " " March, 2010
August 2010
To September 2010
MS, Materials & Project Management
at First Aid and CPR, NISP/SPDC
H First Aid and CPR, NISP/SPDC " - August / Sept., 2010
I
FLOWLINES TRAINING: Covering aspects of Design, Fabrication, Construction, Corrosion control, Pressure Testing, Pipeline and Flowline Leak Repair Methods-Induction and Training, Cathodic Protection, CASHES /QHSSE/ HSE-MS, Materials & Project Management.
SPDC
-
June 2010 J Survival Swimming Certification with PFD (Personal Floating Device) and PPEs. SPDC - December, 2009
I
FLOWLINES TRAINING: Covering aspects of Design, Fabrication, Construction, Corrosion control, Pressure Testing, Pipeline and Flowline Leak Repair Methods-Induction and Training, Cathodic Protection, CASHES /QHSSE/ HSE-MS, Materials & Project Management.
SPDC
-
June 2010 J Survival Swimming Certification with PFD (Personal Floating Device) and PPEs. SPDC - December, 2009
February 2010
To March 2010
at FLOWLINE SECTIONAL REPLACEMENT FOR AWOBA
FLOWLINE SECTIONAL REPLACEMENT FOR AWOBA W7L, 4" X0.73KM " " Feb., -March, 2010
June 2009
To February 2010
Mechanical / Piping Engineer
at FOT, Oil & Gas Free Zone, Onne, Port Harcourt
Location :
France
FOT, Oil & Gas Free Zone, Onne, Port Harcourt. June 2009 - February, 2010
Position: Mechanical / Piping Engineer
Responsibilities:
♦ Construction of sea chest for refrigeration and engine cooling systems.
♦ Review of Gas, Schematics, and ISO Drawings for fuel lines, fuel manifolds, cooling systems.
♦ Installation of Refrigeration compressors by means of brazing of the copper fittings.
♦ Fabrication and installation of exhaust lines for both portside and starboard side engines.
♦ Supports in Engine alignment on the engine mountings to avoid rotational vibration during operation.
♦ Assist in dry docking of vessels and water blasting of hulls.
♦ Installation of damaged Pumps and valves, Fi-fi lines, drainage lines, fuel-water cooling lines.
♦ Supports in sea trials of sea going vessels, report performance and vessel repairs.
♦ Supports in workshop construction reviews and report construction progress.
♦ Vessels worked on includes but not limited to Bourbon Sika, Bourbon Hemera, MV Catamaran, Bourbon Hector, Lamnaco Fisa.
LAMBERT ELECTROMECH NIGERIA LIMITED (Formerly Lambert Somec Nig. Ltd)
Position: Mechanical / Piping Engineer
Responsibilities:
♦ Construction of sea chest for refrigeration and engine cooling systems.
♦ Review of Gas, Schematics, and ISO Drawings for fuel lines, fuel manifolds, cooling systems.
♦ Installation of Refrigeration compressors by means of brazing of the copper fittings.
♦ Fabrication and installation of exhaust lines for both portside and starboard side engines.
♦ Supports in Engine alignment on the engine mountings to avoid rotational vibration during operation.
♦ Assist in dry docking of vessels and water blasting of hulls.
♦ Installation of damaged Pumps and valves, Fi-fi lines, drainage lines, fuel-water cooling lines.
♦ Supports in sea trials of sea going vessels, report performance and vessel repairs.
♦ Supports in workshop construction reviews and report construction progress.
♦ Vessels worked on includes but not limited to Bourbon Sika, Bourbon Hemera, MV Catamaran, Bourbon Hector, Lamnaco Fisa.
LAMBERT ELECTROMECH NIGERIA LIMITED (Formerly Lambert Somec Nig. Ltd)
September 2009
To December 2009
at ADI QUALITY MANAGEMENT CONSULTANTS
SLOT ENGINEERING NIGERIA LIMITED, July, 2012 to July 2014
Eneka Road, Elimgbu, Port Harcourt, Nigeria
Position: Project Facilities Engineer -
(Fabrication/Construction, Installation, Facilities, Pre-commissioning/Commissioning Lead)
Eneka Road, Elimgbu, Port Harcourt, Nigeria
Position: Project Facilities Engineer -
(Fabrication/Construction, Installation, Facilities, Pre-commissioning/Commissioning Lead)
September 2009
To December 2009
at FLOWLINE SECTIONAL REPLACEMENT FOR ALAKIRI W34T (GAS LINE)
FLOWLINE REPLACEMENT FOR AKASO W7L, 4" X 3.50KM. " " Sept., -Dec., 2009
FLOWLINE SECTIONAL REPLACEMENT FOR ALAKIRI W34T (GAS LINE), 6" X 0.096KM. VESL SPDC April, 2009
TOTAL-FINA-ELF OFFICE & HOUSING JV EXTENSION PROJECT, WATER TREATMENT PLANT. LAMBERT TOTAL Nov., 2008-March, 2009
FLOWLINE SECTIONAL REPLACEMENT FOR ALAKIRI W34T (GAS LINE), 6" X 0.096KM. VESL SPDC April, 2009
TOTAL-FINA-ELF OFFICE & HOUSING JV EXTENSION PROJECT, WATER TREATMENT PLANT. LAMBERT TOTAL Nov., 2008-March, 2009
April 2009
To May 2009
at SPDC/NISP Competence Development Training Programme
K SPDC/NISP Competence Development Training Programme (HSE Level 2 & HSE Level 3) " - April / May, 2009
November 2008
To March 2009
Piping Engineer-Water Treatment Plant
at Plot 32 Trans Amadi Industrial Layouts
Plot 32 Trans Amadi Industrial Layouts, November 17, 2008 - March 30, 2009
Project: Total-Fina-Elf Office JV Extension Project PH,
Position: Piping Engineer-Water Treatment Plant.
Responsibilities:
♦ Review of ISO-drawings, Schematic drawings, PFDs (process flow drawings), and P & IDs.
♦ Study and review of FEED / DED documents and Company specifications.
♦ Carry out visual inspection on field welds to check for weld defects such as pin-holes, excess capping, etc.
♦ Pipe surface preparation, cleaning, priming, coating and painting inspections.
♦ Work shop practices and controlling pipe cutting quality, beveling, pipe fitting, power brushing, etc.
♦ Performs other similar or related duties, as assigned. Includes manage safe work conditions through safety work permit system (PTW), and strict compliance to all safety, fire rules and regulations by personnel working in the workshop, ensuring the correct and safe use of workshop equipment according to HSE-MS project plan, and conducting tool box talk for subordinate personnel.
Project: Total-Fina-Elf Office JV Extension Project PH,
Position: Piping Engineer-Water Treatment Plant.
Responsibilities:
♦ Review of ISO-drawings, Schematic drawings, PFDs (process flow drawings), and P & IDs.
♦ Study and review of FEED / DED documents and Company specifications.
♦ Carry out visual inspection on field welds to check for weld defects such as pin-holes, excess capping, etc.
♦ Pipe surface preparation, cleaning, priming, coating and painting inspections.
♦ Work shop practices and controlling pipe cutting quality, beveling, pipe fitting, power brushing, etc.
♦ Performs other similar or related duties, as assigned. Includes manage safe work conditions through safety work permit system (PTW), and strict compliance to all safety, fire rules and regulations by personnel working in the workshop, ensuring the correct and safe use of workshop equipment according to HSE-MS project plan, and conducting tool box talk for subordinate personnel.
January 2006
To December 2008
at SOUTH BANK, NORTH BANK AND YOKRI FLOWSTATION
FORCADOS -YOKRI INTEGRATED PROJECT (SOUTH BANK, NORTH BANK AND YOKRI FLOWSTATION) FYIP PROJECT ENOSCO SPDC 2006-2008
COMPUTER LITERACY LEVEL: ♦ Extensive knowledge of computer use (Windows OS), networking, hardware troubleshooting and repairs.
♦ Proficiency in the following engineering/graphic design, word and data processing software applications: Microsoft Office Suite, AUTOCAD, CADPIPE P & ID PRO, PRIMAVERA P6, MS-Project, Caesar II,
COMPUTER LITERACY LEVEL: ♦ Extensive knowledge of computer use (Windows OS), networking, hardware troubleshooting and repairs.
♦ Proficiency in the following engineering/graphic design, word and data processing software applications: Microsoft Office Suite, AUTOCAD, CADPIPE P & ID PRO, PRIMAVERA P6, MS-Project, Caesar II,
November 2006
To September 2008
Construction / Field Engineer
at ENOSCO NIGERIA LIMITED
Location :
France
SLOT ENGINEERING NIGERIA LIMITED, July, 2012 to July 2014
Eneka Road, Elimgbu, Port Harcourt, Nigeria
Position: Project Facilities Engineer -
(Fabrication/Construction, Installation, Facilities, Pre-commissioning/Commissioning Lead)
Project: SODA / DOMGAS PROJECTS - Afam F5 Reservoir Development Project
Client: Shell Petroleum Development Company of Nigeria Limited
Responsibilities:
♦ Supports in Engineering planning and Design, Pre-qualification / Project Documentation.
♦ Project monitoring, reporting & control, project planning & scheduling.
♦ Tendering, Engineering proposals and SWOT Analysis.
♦ Detailed Design of the systems defined in the FEED packages, which are summarized as follows:
Field Area
✓ 6inch x 0.5km gas flowline (duplex stainless steel) from Afam Well 16 location to Afam Remote manifold.
✓ Review of P&IDs and Isometrics and prepare FCRs (Field Change Request) and Variation Order for both Wellheads, Remote manifold and gas plant end facilities.
✓ 8inch x 12km swing oil/gas pipeline from Afam Location 16 to Okoloma Gas Plant including Pig Launchers & Receivers (Scrapper Barrels)
✓ 8inch x 15km swing oil/gas pipeline from Afam Location 17 to Okoloma Gas Plant including Pig Launchers & Receivers (Scrapper Barrels)
✓ Fabrication/Construction of Scrapper barrels/Pig traps (Pig Launchers and Receivers)
✓ Extension of the Bulk Gas Header and Vent Header.
✓ Corrosion Inhibitor Injection System Package and CIM Shelter works.
✓ Corrosion monitors system packages
✓ Instrument Air Packages
✓ Utility Air Packages
✓ 2.5km of Corrosion Inhibitor Injection Lines to two wellheads (Well 16 and Well 17)
✓ Piping and Instrumentation tie-ins at Afam Remote Manifold and at the Wellheads.
✓ Telecoms installations at Afam Remote Manifold and at the Wellheads.
✓ Fiber - Optic cable linking wellheads to Afam Remote Manifold.
Okoloma Gas Plant Area and Afam Gas Remote Manifold Area
✓ New Crude Oil Inlet Manifold
✓ Extension of Process and Vent Headers, Instrument and Utility Air Headers, Dedicated ligament sections and the supporting Steel structures/supports
✓ Installation of Safety shower and CIM Package and shelter works
✓ Extension to Gas Inlet Manifold
✓ Gas Metering Skid
✓ XXHP Separator
✓ Demulsifier Injection System Package
✓ Additional Piping, Instrument & Cable Infrastructure
✓ Piping and Instrumentation Tie-ins
✓ Extension to Pipe racks and steel structures
VANDREZZER ENERGY SERVICES LIMITED,
Position: Project /Bid Engineer 1 April, 2009 - 9 June, 2012
Responsibilities:
♦ Prepared a winning bid/tender for CONSTRUCTION AND INSTALLATION OF FUN GROUP FACILITIES AT MPN QUA IBOE TERMINAL, AKWA IBOM STATE, NIGERIA.
♦ Prepare bids for ADDAX TB 2909; ADDAX TB 3048; SEPLAT OVHOR Manifold Construction & Installation; FUN Ekid Gas Plant Construction.
♦ Monitoring of project performance against time, quality and budget.
♦ Initiate actions to mitigate schedule slips, cost overruns and quality challenges.
♦ Involved in Nipex NJQS pre-qual using the Nipex NJQS Audit Module.
♦ Measured project progress against planned and report status (S-curve)
♦ Attend Project progress and technical review meetings and reporting.
♦ Carryout project planning, budget prepare, project control, progress follow-ups and reporting.
♦ Prepare invoices / WCC/SO for client and sub-contractors base on approved contract milestone payment.
♦ Update/Review of existing construction drawings, documentation and contractor supervision.
♦ Support in project scoping, site visits/inspections, integrity checks, project kick-off/call-off contract meetings and premob of equipment.
♦ Ensure that client's technical requirements/specifications are met, co-ordinate the project technical team by means of regular meetings, interface control, design monitoring, quality control, milestones review, and project files maintenance.
♦ Prepare contract mobilization package (work schedule, work scopes, work method statement, HSE plan, Security plan, ITPs, Sleeving procedure, Hydro-test procedure, JHA, quality plans, etc)
♦ Review of PFDs, GAs, ISO Drawings, As-Built drawings and prepare MTOs from drawings; QA/QC project documents, prepare WPQT, WPS and PQR for pipeline welding and mechanical modification works, project execution plans and procedures, and take up other responsibilities as assigned by superiors at various site locations.
♦ Perform capacity checks as required by the project with the goal of identifying capacity constraints and debottlenecking solutions.
♦ Provide Construction expertise during risk assessments, HAZOPS, and incident investigations.
♦ Provide guidance to construction activities regarding design requirement, variations and operation changes to improve performance, reduce schedule slips or to reduce HSE exposures.
♦ Observing strictly the provisions of the PTW
♦ Plan all works daily and in advance, giving particular emphasis to work scopes and job hazards.
♦ Pre-commissioning, pre-startup and commissioning of the pipeline and common facilities.
WEST ATLANTIC SHIPYARD (WAS)
FOT, Oil & Gas Free Zone, Onne, Port Harcourt. June 2009 - February, 2010
Eneka Road, Elimgbu, Port Harcourt, Nigeria
Position: Project Facilities Engineer -
(Fabrication/Construction, Installation, Facilities, Pre-commissioning/Commissioning Lead)
Project: SODA / DOMGAS PROJECTS - Afam F5 Reservoir Development Project
Client: Shell Petroleum Development Company of Nigeria Limited
Responsibilities:
♦ Supports in Engineering planning and Design, Pre-qualification / Project Documentation.
♦ Project monitoring, reporting & control, project planning & scheduling.
♦ Tendering, Engineering proposals and SWOT Analysis.
♦ Detailed Design of the systems defined in the FEED packages, which are summarized as follows:
Field Area
✓ 6inch x 0.5km gas flowline (duplex stainless steel) from Afam Well 16 location to Afam Remote manifold.
✓ Review of P&IDs and Isometrics and prepare FCRs (Field Change Request) and Variation Order for both Wellheads, Remote manifold and gas plant end facilities.
✓ 8inch x 12km swing oil/gas pipeline from Afam Location 16 to Okoloma Gas Plant including Pig Launchers & Receivers (Scrapper Barrels)
✓ 8inch x 15km swing oil/gas pipeline from Afam Location 17 to Okoloma Gas Plant including Pig Launchers & Receivers (Scrapper Barrels)
✓ Fabrication/Construction of Scrapper barrels/Pig traps (Pig Launchers and Receivers)
✓ Extension of the Bulk Gas Header and Vent Header.
✓ Corrosion Inhibitor Injection System Package and CIM Shelter works.
✓ Corrosion monitors system packages
✓ Instrument Air Packages
✓ Utility Air Packages
✓ 2.5km of Corrosion Inhibitor Injection Lines to two wellheads (Well 16 and Well 17)
✓ Piping and Instrumentation tie-ins at Afam Remote Manifold and at the Wellheads.
✓ Telecoms installations at Afam Remote Manifold and at the Wellheads.
✓ Fiber - Optic cable linking wellheads to Afam Remote Manifold.
Okoloma Gas Plant Area and Afam Gas Remote Manifold Area
✓ New Crude Oil Inlet Manifold
✓ Extension of Process and Vent Headers, Instrument and Utility Air Headers, Dedicated ligament sections and the supporting Steel structures/supports
✓ Installation of Safety shower and CIM Package and shelter works
✓ Extension to Gas Inlet Manifold
✓ Gas Metering Skid
✓ XXHP Separator
✓ Demulsifier Injection System Package
✓ Additional Piping, Instrument & Cable Infrastructure
✓ Piping and Instrumentation Tie-ins
✓ Extension to Pipe racks and steel structures
VANDREZZER ENERGY SERVICES LIMITED,
Position: Project /Bid Engineer 1 April, 2009 - 9 June, 2012
Responsibilities:
♦ Prepared a winning bid/tender for CONSTRUCTION AND INSTALLATION OF FUN GROUP FACILITIES AT MPN QUA IBOE TERMINAL, AKWA IBOM STATE, NIGERIA.
♦ Prepare bids for ADDAX TB 2909; ADDAX TB 3048; SEPLAT OVHOR Manifold Construction & Installation; FUN Ekid Gas Plant Construction.
♦ Monitoring of project performance against time, quality and budget.
♦ Initiate actions to mitigate schedule slips, cost overruns and quality challenges.
♦ Involved in Nipex NJQS pre-qual using the Nipex NJQS Audit Module.
♦ Measured project progress against planned and report status (S-curve)
♦ Attend Project progress and technical review meetings and reporting.
♦ Carryout project planning, budget prepare, project control, progress follow-ups and reporting.
♦ Prepare invoices / WCC/SO for client and sub-contractors base on approved contract milestone payment.
♦ Update/Review of existing construction drawings, documentation and contractor supervision.
♦ Support in project scoping, site visits/inspections, integrity checks, project kick-off/call-off contract meetings and premob of equipment.
♦ Ensure that client's technical requirements/specifications are met, co-ordinate the project technical team by means of regular meetings, interface control, design monitoring, quality control, milestones review, and project files maintenance.
♦ Prepare contract mobilization package (work schedule, work scopes, work method statement, HSE plan, Security plan, ITPs, Sleeving procedure, Hydro-test procedure, JHA, quality plans, etc)
♦ Review of PFDs, GAs, ISO Drawings, As-Built drawings and prepare MTOs from drawings; QA/QC project documents, prepare WPQT, WPS and PQR for pipeline welding and mechanical modification works, project execution plans and procedures, and take up other responsibilities as assigned by superiors at various site locations.
♦ Perform capacity checks as required by the project with the goal of identifying capacity constraints and debottlenecking solutions.
♦ Provide Construction expertise during risk assessments, HAZOPS, and incident investigations.
♦ Provide guidance to construction activities regarding design requirement, variations and operation changes to improve performance, reduce schedule slips or to reduce HSE exposures.
♦ Observing strictly the provisions of the PTW
♦ Plan all works daily and in advance, giving particular emphasis to work scopes and job hazards.
♦ Pre-commissioning, pre-startup and commissioning of the pipeline and common facilities.
WEST ATLANTIC SHIPYARD (WAS)
FOT, Oil & Gas Free Zone, Onne, Port Harcourt. June 2009 - February, 2010
Project Facilities Engineer
at Shell Petroleum Development Company of Nigeria Limited
Position: Project Facilities Engineer -
(Fabrication/Construction, Installation, Facilities, Pre-commissioning/Commissioning Lead)
Project: SODA / DOMGAS PROJECTS - Afam F5 Reservoir Development Project
Client: Shell Petroleum Development Company of Nigeria Limited
Responsibilities:
♦ Supports in Engineering planning and Design, Pre-qualification / Project Documentation.
♦ Project monitoring, reporting & control, project planning & scheduling.
♦ Tendering, Engineering proposals and SWOT Analysis.
♦ Detailed Design of the systems defined in the FEED packages, which are summarized as follows:
Field Area
✓ 6inch x 0.5km gas flowline (duplex stainless steel) from Afam Well 16 location to Afam Remote manifold.
✓ Review of P&IDs and Isometrics and prepare FCRs (Field Change Request) and Variation Order for both Wellheads, Remote manifold and gas plant end facilities.
✓ 8inch x 12km swing oil/gas pipeline from Afam Location 16 to Okoloma Gas Plant including Pig Launchers & Receivers (Scrapper Barrels)
✓ 8inch x 15km swing oil/gas pipeline from Afam Location 17 to Okoloma Gas Plant including Pig Launchers & Receivers (Scrapper Barrels)
✓ Fabrication/Construction of Scrapper barrels/Pig traps (Pig Launchers and Receivers)
✓ Extension of the Bulk Gas Header and Vent Header.
✓ Corrosion Inhibitor Injection System Package and CIM Shelter works.
✓ Corrosion monitors system packages
✓ Instrument Air Packages
✓ Utility Air Packages
✓ 2.5km of Corrosion Inhibitor Injection Lines to two wellheads (Well 16 and Well 17)
✓ Piping and Instrumentation tie-ins at Afam Remote Manifold and at the Wellheads.
✓ Telecoms installations at Afam Remote Manifold and at the Wellheads.
✓ Fiber - Optic cable linking wellheads to Afam Remote Manifold.
Okoloma Gas Plant Area and Afam Gas Remote Manifold Area
✓ New Crude Oil Inlet Manifold
✓ Extension of Process and Vent Headers, Instrument and Utility Air Headers, Dedicated ligament sections and the supporting Steel structures/supports
✓ Installation of Safety shower and CIM Package and shelter works
✓ Extension to Gas Inlet Manifold
✓ Gas Metering Skid
✓ XXHP Separator
✓ Demulsifier Injection System Package
✓ Additional Piping, Instrument & Cable Infrastructure
✓ Piping and Instrumentation Tie-ins
✓ Extension to Pipe racks and steel structures
(Fabrication/Construction, Installation, Facilities, Pre-commissioning/Commissioning Lead)
Project: SODA / DOMGAS PROJECTS - Afam F5 Reservoir Development Project
Client: Shell Petroleum Development Company of Nigeria Limited
Responsibilities:
♦ Supports in Engineering planning and Design, Pre-qualification / Project Documentation.
♦ Project monitoring, reporting & control, project planning & scheduling.
♦ Tendering, Engineering proposals and SWOT Analysis.
♦ Detailed Design of the systems defined in the FEED packages, which are summarized as follows:
Field Area
✓ 6inch x 0.5km gas flowline (duplex stainless steel) from Afam Well 16 location to Afam Remote manifold.
✓ Review of P&IDs and Isometrics and prepare FCRs (Field Change Request) and Variation Order for both Wellheads, Remote manifold and gas plant end facilities.
✓ 8inch x 12km swing oil/gas pipeline from Afam Location 16 to Okoloma Gas Plant including Pig Launchers & Receivers (Scrapper Barrels)
✓ 8inch x 15km swing oil/gas pipeline from Afam Location 17 to Okoloma Gas Plant including Pig Launchers & Receivers (Scrapper Barrels)
✓ Fabrication/Construction of Scrapper barrels/Pig traps (Pig Launchers and Receivers)
✓ Extension of the Bulk Gas Header and Vent Header.
✓ Corrosion Inhibitor Injection System Package and CIM Shelter works.
✓ Corrosion monitors system packages
✓ Instrument Air Packages
✓ Utility Air Packages
✓ 2.5km of Corrosion Inhibitor Injection Lines to two wellheads (Well 16 and Well 17)
✓ Piping and Instrumentation tie-ins at Afam Remote Manifold and at the Wellheads.
✓ Telecoms installations at Afam Remote Manifold and at the Wellheads.
✓ Fiber - Optic cable linking wellheads to Afam Remote Manifold.
Okoloma Gas Plant Area and Afam Gas Remote Manifold Area
✓ New Crude Oil Inlet Manifold
✓ Extension of Process and Vent Headers, Instrument and Utility Air Headers, Dedicated ligament sections and the supporting Steel structures/supports
✓ Installation of Safety shower and CIM Package and shelter works
✓ Extension to Gas Inlet Manifold
✓ Gas Metering Skid
✓ XXHP Separator
✓ Demulsifier Injection System Package
✓ Additional Piping, Instrument & Cable Infrastructure
✓ Piping and Instrumentation Tie-ins
✓ Extension to Pipe racks and steel structures
Mechanical / Piping Engineer
at IQI LTD INDIA
Location :
India
Position: Mechanical / Piping Engineer
Responsibilities:
♦ Construction of sea chest for refrigeration and engine cooling systems.
♦ Review of Gas, Schematics, and ISO Drawings for fuel lines, fuel manifolds, cooling systems.
♦ Installation of Refrigeration compressors by means of brazing of the copper fittings.
♦ Fabrication and installation of exhaust lines for both portside and starboard side engines.
♦ Supports in Engine alignment on the engine mountings to avoid rotational vibration during operation.
♦ Assist in dry docking of vessels and water blasting of hulls.
♦ Installation of damaged Pumps and valves, Fi-fi lines, drainage lines, fuel-water cooling lines.
♦ Supports in sea trials of sea going vessels, report performance and vessel repairs.
♦ Supports in workshop construction reviews and report construction progress.
♦ Vessels worked on includes but not limited to Bourbon Sika, Bourbon Hemera, MV Catamaran, Bourbon Hector, Lamnaco Fisa.
LAMBERT ELECTROMECH NIGERIA LIMITED (Formerly Lambert Somec Nig. Ltd)
Plot 32 Trans Amadi Industrial Layouts, November 17, 2008 - March 30, 2009
Project: Total-Fina-Elf Office JV Extension Project PH,
Position: Piping Engineer-Water Treatment Plant.
Responsibilities:
♦ Review of ISO-drawings, Schematic drawings, PFDs (process flow drawings), and P & IDs.
♦ Study and review of FEED / DED documents and Company specifications.
♦ Carry out visual inspection on field welds to check for weld defects such as pin-holes, excess capping, etc.
♦ Pipe surface preparation, cleaning, priming, coating and painting inspections.
♦ Work shop practices and controlling pipe cutting quality, beveling, pipe fitting, power brushing, etc.
♦ Performs other similar or related duties, as assigned. Includes manage safe work conditions through safety work permit system (PTW), and strict compliance to all safety, fire rules and regulations by personnel working in the workshop, ensuring the correct and safe use of workshop equipment according to HSE-MS project plan, and conducting tool box talk for subordinate personnel.
ENOSCO NIGERIA LIMITED, November 2006 - September, 2008
310, PH/ Aba Express Way, Port Harcourt,
Project: Forcados -Yokri Integrated Project (FYIP) -Onshore,
South Bank, North Bank and Yokri Flow Stations-Swamp, (SPDC)
Position: Construction / Field Engineer.
Responsibilities:
♦ Inspect and approve fabrication materials with specifications and according to project scopes.
♦ Supervised the fabrication and assembling of inlet manifolds, structural skids, well head platforms, boat landing pre-fabrication works, fabrication and installation of piping spools of various sizes.
♦ Supervise blasting of skids and piping spools, priming and painting inspections according to project scopes, SSCS (Shell Standard Construction Specifications) and DEPs.
♦ Maintenance and Change out of valves.
♦ Involved in pressure testing of piping spool, hook-ups, pre-commissioning, commissioning works and handover.
♦ Support in As-built documentation and closeouts.
Responsibilities:
♦ Construction of sea chest for refrigeration and engine cooling systems.
♦ Review of Gas, Schematics, and ISO Drawings for fuel lines, fuel manifolds, cooling systems.
♦ Installation of Refrigeration compressors by means of brazing of the copper fittings.
♦ Fabrication and installation of exhaust lines for both portside and starboard side engines.
♦ Supports in Engine alignment on the engine mountings to avoid rotational vibration during operation.
♦ Assist in dry docking of vessels and water blasting of hulls.
♦ Installation of damaged Pumps and valves, Fi-fi lines, drainage lines, fuel-water cooling lines.
♦ Supports in sea trials of sea going vessels, report performance and vessel repairs.
♦ Supports in workshop construction reviews and report construction progress.
♦ Vessels worked on includes but not limited to Bourbon Sika, Bourbon Hemera, MV Catamaran, Bourbon Hector, Lamnaco Fisa.
LAMBERT ELECTROMECH NIGERIA LIMITED (Formerly Lambert Somec Nig. Ltd)
Plot 32 Trans Amadi Industrial Layouts, November 17, 2008 - March 30, 2009
Project: Total-Fina-Elf Office JV Extension Project PH,
Position: Piping Engineer-Water Treatment Plant.
Responsibilities:
♦ Review of ISO-drawings, Schematic drawings, PFDs (process flow drawings), and P & IDs.
♦ Study and review of FEED / DED documents and Company specifications.
♦ Carry out visual inspection on field welds to check for weld defects such as pin-holes, excess capping, etc.
♦ Pipe surface preparation, cleaning, priming, coating and painting inspections.
♦ Work shop practices and controlling pipe cutting quality, beveling, pipe fitting, power brushing, etc.
♦ Performs other similar or related duties, as assigned. Includes manage safe work conditions through safety work permit system (PTW), and strict compliance to all safety, fire rules and regulations by personnel working in the workshop, ensuring the correct and safe use of workshop equipment according to HSE-MS project plan, and conducting tool box talk for subordinate personnel.
ENOSCO NIGERIA LIMITED, November 2006 - September, 2008
310, PH/ Aba Express Way, Port Harcourt,
Project: Forcados -Yokri Integrated Project (FYIP) -Onshore,
South Bank, North Bank and Yokri Flow Stations-Swamp, (SPDC)
Position: Construction / Field Engineer.
Responsibilities:
♦ Inspect and approve fabrication materials with specifications and according to project scopes.
♦ Supervised the fabrication and assembling of inlet manifolds, structural skids, well head platforms, boat landing pre-fabrication works, fabrication and installation of piping spools of various sizes.
♦ Supervise blasting of skids and piping spools, priming and painting inspections according to project scopes, SSCS (Shell Standard Construction Specifications) and DEPs.
♦ Maintenance and Change out of valves.
♦ Involved in pressure testing of piping spool, hook-ups, pre-commissioning, commissioning works and handover.
♦ Support in As-built documentation and closeouts.
Mechanical / Piping Engineer
at SODA
Location :
India
Project: SODA / DOMGAS PROJECTS - Afam F5 Reservoir Development Project
Client: Shell Petroleum Development Company of Nigeria Limited
Responsibilities:
♦ Supports in Engineering planning and Design, Pre-qualification / Project Documentation.
♦ Project monitoring, reporting & control, project planning & scheduling.
♦ Tendering, Engineering proposals and SWOT Analysis.
♦ Detailed Design of the systems defined in the FEED packages, which are summarized as follows:
Field Area
✓ 6inch x 0.5km gas flowline (duplex stainless steel) from Afam Well 16 location to Afam Remote manifold.
✓ Review of P&IDs and Isometrics and prepare FCRs (Field Change Request) and Variation Order for both Wellheads, Remote manifold and gas plant end facilities.
✓ 8inch x 12km swing oil/gas pipeline from Afam Location 16 to Okoloma Gas Plant including Pig Launchers & Receivers (Scrapper Barrels)
✓ 8inch x 15km swing oil/gas pipeline from Afam Location 17 to Okoloma Gas Plant including Pig Launchers & Receivers (Scrapper Barrels)
✓ Fabrication/Construction of Scrapper barrels/Pig traps (Pig Launchers and Receivers)
✓ Extension of the Bulk Gas Header and Vent Header.
✓ Corrosion Inhibitor Injection System Package and CIM Shelter works.
✓ Corrosion monitors system packages
✓ Instrument Air Packages
✓ Utility Air Packages
✓ 2.5km of Corrosion Inhibitor Injection Lines to two wellheads (Well 16 and Well 17)
✓ Piping and Instrumentation tie-ins at Afam Remote Manifold and at the Wellheads.
✓ Telecoms installations at Afam Remote Manifold and at the Wellheads.
✓ Fiber - Optic cable linking wellheads to Afam Remote Manifold.
Okoloma Gas Plant Area and Afam Gas Remote Manifold Area
✓ New Crude Oil Inlet Manifold
✓ Extension of Process and Vent Headers, Instrument and Utility Air Headers, Dedicated ligament sections and the supporting Steel structures/supports
✓ Installation of Safety shower and CIM Package and shelter works
✓ Extension to Gas Inlet Manifold
✓ Gas Metering Skid
✓ XXHP Separator
✓ Demulsifier Injection System Package
✓ Additional Piping, Instrument & Cable Infrastructure
✓ Piping and Instrumentation Tie-ins
✓ Extension to Pipe racks and steel structures
VANDREZZER ENERGY SERVICES LIMITED,
Position: Project /Bid Engineer 1 April, 2009 - 9 June, 2012
Responsibilities:
♦ Prepared a winning bid/tender for CONSTRUCTION AND INSTALLATION OF FUN GROUP FACILITIES AT MPN QUA IBOE TERMINAL, AKWA IBOM STATE, NIGERIA.
♦ Prepare bids for ADDAX TB 2909; ADDAX TB 3048; SEPLAT OVHOR Manifold Construction & Installation; FUN Ekid Gas Plant Construction.
♦ Monitoring of project performance against time, quality and budget.
♦ Initiate actions to mitigate schedule slips, cost overruns and quality challenges.
♦ Involved in Nipex NJQS pre-qual using the Nipex NJQS Audit Module.
♦ Measured project progress against planned and report status (S-curve)
♦ Attend Project progress and technical review meetings and reporting.
♦ Carryout project planning, budget prepare, project control, progress follow-ups and reporting.
♦ Prepare invoices / WCC/SO for client and sub-contractors base on approved contract milestone payment.
♦ Update/Review of existing construction drawings, documentation and contractor supervision.
♦ Support in project scoping, site visits/inspections, integrity checks, project kick-off/call-off contract meetings and premob of equipment.
♦ Ensure that client's technical requirements/specifications are met, co-ordinate the project technical team by means of regular meetings, interface control, design monitoring, quality control, milestones review, and project files maintenance.
♦ Prepare contract mobilization package (work schedule, work scopes, work method statement, HSE plan, Security plan, ITPs, Sleeving procedure, Hydro-test procedure, JHA, quality plans, etc)
♦ Review of PFDs, GAs, ISO Drawings, As-Built drawings and prepare MTOs from drawings; QA/QC project documents, prepare WPQT, WPS and PQR for pipeline welding and mechanical modification works, project execution plans and procedures, and take up other responsibilities as assigned by superiors at various site locations.
♦ Perform capacity checks as required by the project with the goal of identifying capacity constraints and debottlenecking solutions.
♦ Provide Construction expertise during risk assessments, HAZOPS, and incident investigations.
♦ Provide guidance to construction activities regarding design requirement, variations and operation changes to improve performance, reduce schedule slips or to reduce HSE exposures.
♦ Observing strictly the provisions of the PTW
♦ Plan all works daily and in advance, giving particular emphasis to work scopes and job hazards.
♦ Pre-commissioning, pre-startup and commissioning of the pipeline and common facilities.
WEST ATLANTIC SHIPYARD (WAS)
FOT, Oil & Gas Free Zone, Onne, Port Harcourt. June 2009 - February, 2010
Position: Mechanical / Piping Engineer
Responsibilities:
♦ Construction of sea chest for refrigeration and engine cooling systems.
♦ Review of Gas, Schematics, and ISO Drawings for fuel lines, fuel manifolds, cooling systems.
♦ Installation of Refrigeration compressors by means of brazing of the copper fittings.
♦ Fabrication and installation of exhaust lines for both portside and starboard side engines.
♦ Supports in Engine alignment on the engine mountings to avoid rotational vibration during operation.
♦ Assist in dry docking of vessels and water blasting of hulls.
♦ Installation of damaged Pumps and valves, Fi-fi lines, drainage lines, fuel-water cooling lines.
♦ Supports in sea trials of sea going vessels, report performance and vessel repairs.
♦ Supports in workshop construction reviews and report construction progress.
♦ Vessels worked on includes but not limited to Bourbon Sika, Bourbon Hemera, MV Catamaran, Bourbon Hector, Lamnaco Fisa.
LAMBERT ELECTROMECH NIGERIA LIMITED (Formerly Lambert Somec Nig. Ltd)
Plot 32 Trans Amadi Industrial Layouts, November 17, 2008 - March 30, 2009
Project: Total-Fina-Elf Office JV Extension Project PH,
Position: Piping Engineer-Water Treatment Plant.
Responsibilities:
♦ Review of ISO-drawings, Schematic drawings, PFDs (process flow drawings), and P & IDs.
♦ Study and review of FEED / DED documents and Company specifications.
♦ Carry out visual inspection on field welds to check for weld defects such as pin-holes, excess capping, etc.
♦ Pipe surface preparation, cleaning, priming, coating and painting inspections.
♦ Work shop practices and controlling pipe cutting quality, beveling, pipe fitting, power brushing, etc.
♦ Performs other similar or related duties, as assigned. Includes manage safe work conditions through safety work permit system (PTW), and strict compliance to all safety, fire rules and regulations by personnel working in the workshop, ensuring the correct and safe use of workshop equipment according to HSE-MS project plan, and conducting tool box talk for subordinate personnel.
ENOSCO NIGERIA LIMITED, November 2006 - September, 2008
310, PH/ Aba Express Way, Port Harcourt,
Project: Forcados -Yokri Integrated Project (FYIP) -Onshore,
South Bank, North Bank and Yokri Flow Stations-Swamp, (SPDC)
Position: Construction / Field Engineer.
Responsibilities:
♦ Inspect and approve fabrication materials with specifications and according to project scopes.
♦ Supervised the fabrication and assembling of inlet manifolds, structural skids, well head platforms, boat landing pre-fabrication works, fabrication and installation of piping spools of various sizes.
♦ Supervise blasting of skids and piping spools, priming and painting inspections according to project scopes, SSCS (Shell Standard Construction Specifications) and DEPs.
♦ Maintenance and Change out of valves.
♦ Involved in pressure testing of piping spool, hook-ups, pre-commissioning, commissioning works and handover.
♦ Support in As-built documentation and closeouts.
CAREER DEVELOPMENT COURSES / CERTIFICATIONS / TRAINING ATTENDED: S/No. TRAININGS / CERTIFICATIONS COMPANY CONSULTANT DATE
A AWS CWI (Certified Welding Inspector/Engineer) SELF IQI LTD INDIA ONGOING
B ASNT LEVEL II (VT, MT, PT, UT, RT and RFI) LEL GENNESARET August/December, 2013
C Marine Journey Management Training Course SPDC March, 2012
D Permit To Work System Training/ Course SPDC May, 2012
E Helicopter Underwater Escape Course (HUET) VESL MAERSK/ OPEANS April, 2011
F Offshore safety / Survival at Sea Course (SAS) " MAERSK / OPEANS April, 2011
G Gas Testing and Breathing Apparatus, NISP/SPDC " - Dec, 2010
H First Aid and CPR, NISP/SPDC " - August / Sept., 2010
I
FLOWLINES TRAINING: Covering aspects of Design, Fabrication, Construction, Corrosion control, Pressure Testing, Pipeline and Flowline Leak Repair Methods-Induction and Training, Cathodic Protection, CASHES /QHSSE/ HSE-MS, Materials & Project Management.
SPDC
-
June 2010 J Survival Swimming Certification with PFD (Personal Floating Device) and PPEs. SPDC - December, 2009
K SPDC/NISP Competence Development Training Programme (HSE Level 2 & HSE Level 3) " - April / May, 2009
L ISO 14001 (Environmental Management System) Training/ ISO 9001:2000 (Quality Management System) Training VESL ADI QUALITY MANAGEMENT CONSULTANTS Sept.-Dec, 2009
M HSE WORKSHOP/TRAINING "Marching Towards Incident Free Worksite" TOTAL - February, 2009
ENGINEERING PROJECTS EXECUTED / ONGOING: S/No CONTRACT/PROJECT TITLE COMPANY CLIENT DATES
Client: Shell Petroleum Development Company of Nigeria Limited
Responsibilities:
♦ Supports in Engineering planning and Design, Pre-qualification / Project Documentation.
♦ Project monitoring, reporting & control, project planning & scheduling.
♦ Tendering, Engineering proposals and SWOT Analysis.
♦ Detailed Design of the systems defined in the FEED packages, which are summarized as follows:
Field Area
✓ 6inch x 0.5km gas flowline (duplex stainless steel) from Afam Well 16 location to Afam Remote manifold.
✓ Review of P&IDs and Isometrics and prepare FCRs (Field Change Request) and Variation Order for both Wellheads, Remote manifold and gas plant end facilities.
✓ 8inch x 12km swing oil/gas pipeline from Afam Location 16 to Okoloma Gas Plant including Pig Launchers & Receivers (Scrapper Barrels)
✓ 8inch x 15km swing oil/gas pipeline from Afam Location 17 to Okoloma Gas Plant including Pig Launchers & Receivers (Scrapper Barrels)
✓ Fabrication/Construction of Scrapper barrels/Pig traps (Pig Launchers and Receivers)
✓ Extension of the Bulk Gas Header and Vent Header.
✓ Corrosion Inhibitor Injection System Package and CIM Shelter works.
✓ Corrosion monitors system packages
✓ Instrument Air Packages
✓ Utility Air Packages
✓ 2.5km of Corrosion Inhibitor Injection Lines to two wellheads (Well 16 and Well 17)
✓ Piping and Instrumentation tie-ins at Afam Remote Manifold and at the Wellheads.
✓ Telecoms installations at Afam Remote Manifold and at the Wellheads.
✓ Fiber - Optic cable linking wellheads to Afam Remote Manifold.
Okoloma Gas Plant Area and Afam Gas Remote Manifold Area
✓ New Crude Oil Inlet Manifold
✓ Extension of Process and Vent Headers, Instrument and Utility Air Headers, Dedicated ligament sections and the supporting Steel structures/supports
✓ Installation of Safety shower and CIM Package and shelter works
✓ Extension to Gas Inlet Manifold
✓ Gas Metering Skid
✓ XXHP Separator
✓ Demulsifier Injection System Package
✓ Additional Piping, Instrument & Cable Infrastructure
✓ Piping and Instrumentation Tie-ins
✓ Extension to Pipe racks and steel structures
VANDREZZER ENERGY SERVICES LIMITED,
Position: Project /Bid Engineer 1 April, 2009 - 9 June, 2012
Responsibilities:
♦ Prepared a winning bid/tender for CONSTRUCTION AND INSTALLATION OF FUN GROUP FACILITIES AT MPN QUA IBOE TERMINAL, AKWA IBOM STATE, NIGERIA.
♦ Prepare bids for ADDAX TB 2909; ADDAX TB 3048; SEPLAT OVHOR Manifold Construction & Installation; FUN Ekid Gas Plant Construction.
♦ Monitoring of project performance against time, quality and budget.
♦ Initiate actions to mitigate schedule slips, cost overruns and quality challenges.
♦ Involved in Nipex NJQS pre-qual using the Nipex NJQS Audit Module.
♦ Measured project progress against planned and report status (S-curve)
♦ Attend Project progress and technical review meetings and reporting.
♦ Carryout project planning, budget prepare, project control, progress follow-ups and reporting.
♦ Prepare invoices / WCC/SO for client and sub-contractors base on approved contract milestone payment.
♦ Update/Review of existing construction drawings, documentation and contractor supervision.
♦ Support in project scoping, site visits/inspections, integrity checks, project kick-off/call-off contract meetings and premob of equipment.
♦ Ensure that client's technical requirements/specifications are met, co-ordinate the project technical team by means of regular meetings, interface control, design monitoring, quality control, milestones review, and project files maintenance.
♦ Prepare contract mobilization package (work schedule, work scopes, work method statement, HSE plan, Security plan, ITPs, Sleeving procedure, Hydro-test procedure, JHA, quality plans, etc)
♦ Review of PFDs, GAs, ISO Drawings, As-Built drawings and prepare MTOs from drawings; QA/QC project documents, prepare WPQT, WPS and PQR for pipeline welding and mechanical modification works, project execution plans and procedures, and take up other responsibilities as assigned by superiors at various site locations.
♦ Perform capacity checks as required by the project with the goal of identifying capacity constraints and debottlenecking solutions.
♦ Provide Construction expertise during risk assessments, HAZOPS, and incident investigations.
♦ Provide guidance to construction activities regarding design requirement, variations and operation changes to improve performance, reduce schedule slips or to reduce HSE exposures.
♦ Observing strictly the provisions of the PTW
♦ Plan all works daily and in advance, giving particular emphasis to work scopes and job hazards.
♦ Pre-commissioning, pre-startup and commissioning of the pipeline and common facilities.
WEST ATLANTIC SHIPYARD (WAS)
FOT, Oil & Gas Free Zone, Onne, Port Harcourt. June 2009 - February, 2010
Position: Mechanical / Piping Engineer
Responsibilities:
♦ Construction of sea chest for refrigeration and engine cooling systems.
♦ Review of Gas, Schematics, and ISO Drawings for fuel lines, fuel manifolds, cooling systems.
♦ Installation of Refrigeration compressors by means of brazing of the copper fittings.
♦ Fabrication and installation of exhaust lines for both portside and starboard side engines.
♦ Supports in Engine alignment on the engine mountings to avoid rotational vibration during operation.
♦ Assist in dry docking of vessels and water blasting of hulls.
♦ Installation of damaged Pumps and valves, Fi-fi lines, drainage lines, fuel-water cooling lines.
♦ Supports in sea trials of sea going vessels, report performance and vessel repairs.
♦ Supports in workshop construction reviews and report construction progress.
♦ Vessels worked on includes but not limited to Bourbon Sika, Bourbon Hemera, MV Catamaran, Bourbon Hector, Lamnaco Fisa.
LAMBERT ELECTROMECH NIGERIA LIMITED (Formerly Lambert Somec Nig. Ltd)
Plot 32 Trans Amadi Industrial Layouts, November 17, 2008 - March 30, 2009
Project: Total-Fina-Elf Office JV Extension Project PH,
Position: Piping Engineer-Water Treatment Plant.
Responsibilities:
♦ Review of ISO-drawings, Schematic drawings, PFDs (process flow drawings), and P & IDs.
♦ Study and review of FEED / DED documents and Company specifications.
♦ Carry out visual inspection on field welds to check for weld defects such as pin-holes, excess capping, etc.
♦ Pipe surface preparation, cleaning, priming, coating and painting inspections.
♦ Work shop practices and controlling pipe cutting quality, beveling, pipe fitting, power brushing, etc.
♦ Performs other similar or related duties, as assigned. Includes manage safe work conditions through safety work permit system (PTW), and strict compliance to all safety, fire rules and regulations by personnel working in the workshop, ensuring the correct and safe use of workshop equipment according to HSE-MS project plan, and conducting tool box talk for subordinate personnel.
ENOSCO NIGERIA LIMITED, November 2006 - September, 2008
310, PH/ Aba Express Way, Port Harcourt,
Project: Forcados -Yokri Integrated Project (FYIP) -Onshore,
South Bank, North Bank and Yokri Flow Stations-Swamp, (SPDC)
Position: Construction / Field Engineer.
Responsibilities:
♦ Inspect and approve fabrication materials with specifications and according to project scopes.
♦ Supervised the fabrication and assembling of inlet manifolds, structural skids, well head platforms, boat landing pre-fabrication works, fabrication and installation of piping spools of various sizes.
♦ Supervise blasting of skids and piping spools, priming and painting inspections according to project scopes, SSCS (Shell Standard Construction Specifications) and DEPs.
♦ Maintenance and Change out of valves.
♦ Involved in pressure testing of piping spool, hook-ups, pre-commissioning, commissioning works and handover.
♦ Support in As-built documentation and closeouts.
CAREER DEVELOPMENT COURSES / CERTIFICATIONS / TRAINING ATTENDED: S/No. TRAININGS / CERTIFICATIONS COMPANY CONSULTANT DATE
A AWS CWI (Certified Welding Inspector/Engineer) SELF IQI LTD INDIA ONGOING
B ASNT LEVEL II (VT, MT, PT, UT, RT and RFI) LEL GENNESARET August/December, 2013
C Marine Journey Management Training Course SPDC March, 2012
D Permit To Work System Training/ Course SPDC May, 2012
E Helicopter Underwater Escape Course (HUET) VESL MAERSK/ OPEANS April, 2011
F Offshore safety / Survival at Sea Course (SAS) " MAERSK / OPEANS April, 2011
G Gas Testing and Breathing Apparatus, NISP/SPDC " - Dec, 2010
H First Aid and CPR, NISP/SPDC " - August / Sept., 2010
I
FLOWLINES TRAINING: Covering aspects of Design, Fabrication, Construction, Corrosion control, Pressure Testing, Pipeline and Flowline Leak Repair Methods-Induction and Training, Cathodic Protection, CASHES /QHSSE/ HSE-MS, Materials & Project Management.
SPDC
-
June 2010 J Survival Swimming Certification with PFD (Personal Floating Device) and PPEs. SPDC - December, 2009
K SPDC/NISP Competence Development Training Programme (HSE Level 2 & HSE Level 3) " - April / May, 2009
L ISO 14001 (Environmental Management System) Training/ ISO 9001:2000 (Quality Management System) Training VESL ADI QUALITY MANAGEMENT CONSULTANTS Sept.-Dec, 2009
M HSE WORKSHOP/TRAINING "Marching Towards Incident Free Worksite" TOTAL - February, 2009
ENGINEERING PROJECTS EXECUTED / ONGOING: S/No CONTRACT/PROJECT TITLE COMPANY CLIENT DATES
Share on Facebook
Share on Twitter
Share Via Email