hvac engineer
Isam kabbani & partners
مجموع سنوات الخبرة :16 years, 11 أشهر
Working as a ‘HVAC Engineer’ for “Isam Kabbani & Partners for Construction & Maintenance, Khobar, KSA.
Assigned as a Lead HVAC Engineer for “Upgrade Buildings for Risk mitigation” @ Sedgum Gas Plant (Saudi Aramco facility).
Assigned as a HVAC Engineer for “Upgrade Buildings for Risk mitigation” @ Abqaiq Plant (Saudi Aramco facility).
Worked as a HVAC Engineer for “Upgradation of Communication building” @ Sedgum (Saudi Aramco).
Job Responsibilities as a HVAC Engineer.
Study the scope, drawing & specification for the project to comply Saudi Aramco standard.
Managed, supervised and lead the team of Site Engineers, supervisors, technicians, & contractors on site.
Prepare Redline drawing for the changes as per the site condition.
Prepare technical query for any design changes and get it approved.
Attending site coordination meeting with PMT / PID / Aramco & follow-up for site related issues.
Review NMR Documents & MTA before submitted to Aramco for Approvals.
Program work activities and design an action plan.
Follow up with site staff for any kind of changes in installation and to ensure that the PID/QC comments are implemented & arrange revisit of PID/QC to the designated area at site.
Coordinate with procurement department for the delivery of the material & prepare delivery schedule for long lead items.
Prepare schedule for purchase of bulk materials and consumable, ensure availability of tools & site requirements.
Prepare bill of quantities for any change orders on site. Reviewing Variation orders and Claims.
Monitor actual progress on site and prepare the progress reports.
Prepare two weeks look ahead plan and submit to QA/QC department & PMT for review.
Maintaining effective Interface with Other Groups and Engineering Disciplines in order to achieve Project and Company Goal.
Reviews HVAC & structural duct support shop drawings and make necessary changes if required to comply standards.
Design structural duct support, prepare shop drawing & get it approved from PMT for fabrication.
Replace old precession type air conditioning units with new precession type AC unit (Liebert).
Performing & assist third party for conducting TAB for complete HVAC system as per the design requirement.
Preform Pre commissioning of HVAC units’ and get it approved from the client.
Perform & assist vendor for pre-commissioning of DDC for complete automation of HVAC system.
Was assigned as ‘Mechanical Engineer’ in “A1 Construction, Maharashtra, India for “Commercial Buildings & Residential Complex”.
Job Responsibilities as a Mechanical Engineer (MEP)
Monitoring All the AC, Plumbing, works to ensure the work is in accordance to the drawings & quality standards.
Fully aware of activities being carried out at site. Updates activities related to Engineering, Procurement and construction in close co-ordination with Discipline Supervisor & foremen.
Inspection & Testing of all system related to AC, Plumbing, water supply, Drainage Installation.
Preparation of piping material requisitions for procurement purpose and co-ordination with procurement.
Program work activities and design an action plan.
Perform MTO activities at various stages of the project and continuous monitoring.
Coordinating material engineering activities with other design, engineering, and purchasing disciplines.
Conduct some site survey to troubleshoot and verification of the design and construction problems.
Coordinating with Detail Engineering Consultants and Site for various material issues.
Maintaining Cordial Relations with Client and Site queries follow up.
Checking of vendor’s drawings and other vendor documentation prior Coordinating with Detail Engineering Consultants and Site for various material issues.
Was assigned as a ‘Mechanical Engineer’ in “SBG - PBAD, Riyadh” for “King Abdullah Financial District (KAFD). The project cost is 19 Billion for construction of 30 High Rise Res./ Commercial & hotel buildings having a total built up area of 1, 977, 611.0 m2. Responsible for Parcel - 1.14.
Worked as a Material Mechanical Engineer in “SBG - PBAD, Riyadh” for “King Abdullah Financial District (KAFD).
Job Responsibilities as a Mechanical Engineer (MEP)
Studying Project Contract, scope of work, specification, construction drawings, safety policy & Quality Plan.
Monitoring All the HVAC, Plumbing, Fire Fighting works to ensure the work is in accordance to the approved shop drawings & quality standards.
Ensuring that MEP services provisions clearance is provided on time for structure for commissioning etc.
Floating inspection request for installations to consultant and rectifying if any snag works / comments.
Floating request to consultant for material inspection as per submittals and specification.
Follow up with site staff for any kind of changes in installation and to ensure that the consultant’s comments are implemented & arrange revisit of consultant.
Fully aware of activities being carried out at site. Updates activities related to Engineering, Procurement and construction in close co-ordination with Discipline Supervisor & foremen’s engineer.
Attending site coordination meeting with client / consultant / contractor & follow-up for quality related issues, prepare agenda, take minutes & follow up.
Identifying SON, NCR, defects / snags & follow up with team for effective, corrective & preventive action on the same.
Inspection & Testing of all system related to HVAC, Plumbing, water supply, Drainage & Fire Fighting Installation.
Assisting Project Manager for correspondence with client, contractors etc.
Preparation of Daily & Weekly program based on one month look ahead program.
Prepare bill of quantities for any change orders on site.
Coordinate with procurement department for the delivery of the material at site.
Managed, supervised and lead the team of technicians, foremen’s, sub-contractors.
Prepare and measure the sub-contractor work for contract documents, monthly payments and final accounts. Verify the subcontractor Invoice against the claims.
Monitor actual progress on site and prepare the progress reports for QS.
Prepare MSR in oracle ERP system for manager approval & get the job cost code for particular material from PCS department, get manager approval & than forward it to procurement department.
Prepare detailed requisitions for equipment and materials. Review supplier drawings, submittals and prepare requisition as approved.
Coordinate with supplier for various materials, tools and equipment.
Follow up with the suppliers to get the material delivered on time.
Prepare Move orders as per the site requisition after delivery of material.
Coordinating with site Engineer for various material issues.
Prepare schedule for deliveries for long lead items in coordination with the lead engineers & forward schedule to vendors.
Prepare Inspection request for the material in ERP system and forward it to QC department.
Was assigned as a Mechanical Site Engineer for Emirati Housing Community - Yas Island Abu Dhabi.
Worked as Material Engineer for Hydra Avenue- Al Reem Island, Abu Dhabi.
Worked as Estimation Engineer for various project.
Job Responsibilities as Mechanical Site Engineer
Fully aware of scope of work & prepare work breakdown and allocate manpower as per the work, zones areas & discipline wise.
Plan the entire project execution, supervision and monitoring activities and get approval for the consultant.
Prepare and submit the take-off sheet and get approval from the Client representative in preparation for the monthly billing.
Responsible for the take-off of quantities from the project drawings.
Prepare schedule for purchase of bulk materials and consumable, ensure availability of tools & site requirements
Prepare detailed requisitions for equipment’s and materials. Review drawings, submittals and perform technical bid analyses, prepare & get approval for the execution plan from the client Review HVAC, Plumbing Drawing.
Prepare and measure the sub-contractor work for contract documents, monthly payments and final accounts.
Prepare Monthly invoices for the project as per the progress of the site & get it certified from Main contractors MEP manager.
Work on estimation, prepared bill of material, material consumption report.
Monitor actual progress on site and prepare the progress reports for monthly billing.
Prepare Material on Site Claim monthly to ease in cash flow.
Studied preliminary HVAC system, prepared Bill of Quantity, planned and estimated Project expenditure.
Negotiate with the suppliers to get the better prices and also evaluate the material as per the specification of the project.
Based on technical & commercial bids prepare comparisons for at least three suppliers & for managerial approval for finalizing the vendor.
Releasing LPO’s and schedules the delivers as per the site condition.
Executed the project through constant interactions with the client, main contractor & maintained effective Customer Relationship.
Work on takeoff of mechanical services HVAC, Plumbing & fire Fighting on several projects in estimation department.
Perform the tasks of preparing compliance statement for the project specification.
Handle responsibilities of preparing and submitting weekly working progress to the senior estimation engineer.
Worked in Doors & Doors, Mumbai, India as Mechanical Engineer
Job Responsibilities as Mechanical Engineer
Executive Fabrication of Doors and Windows of Aluminium material.
To execute calculation part for the cutting of the profiles.
Execute fabrication of doors and windows as per the work orders given by the clients.
Suggest proper fittings for the profiles of casement and sash of doors and windows.
Coordinate with superintendents, production manager and to prepare day wise reports.
Plan for manpower and material requisition and to coordinate with store and purchase Department.
Coordinating engineering activities within disciplines and procurement.
Inter-departmental coordination of project activities to meet the schedule.
Perform the tasks of preparing compliance statement for the project specification.
Work on estimation, prepared bill of material, material consumption report.
•Make site visits to make measurement on site for completed works.
•Prepare and submit the take-off sheet and get approval from the Client representative in preparation for the monthly billing.
•Monitor actual progress on site and prepare the progress reports.
•Prepare Material on Site Claim monthly to ease in cash flow.
•Studied preliminary HVAC system, prepared Bill of Quantity, planned and estimated Project expenditure.
•Negotiate with the suppliers to get the better prices and also evaluate the material as per the specification of the project.
•Coordinating with Detail Engineering and Site for various material issues.
•Coordinating Engineering activities within disciplines and procurement.
•Prepared comparisons for at least three suppliers & report to general manager for the approval of the supplier
•Releasing LPO’s and schedules the delivers as per the site condition.
•Executed the project through constant interactions with the client, main contractor & maintained effective Customer Relationship.
•Worked on invoices and get it approved from the clients for the completed work on site
Work on takeoff of mechanical services HVAC, Plumbing & fire Fighting on several projects in estimation department.
•Perform the tasks of preparing compliance statement for the project specification.
•Handle responsibilities of preparing and submitting weekly working progress to the senior estimation engineer .
•Coordinating and analyzing specifications, drawings and suppliers quotations and preparing technical comparative statement.
•Prepared detailed records of the estimate provided a break up, which included the material cost and the materials required for the project.
•To interpret & review system drawings to identify any difference to tender requirements and raise queries against specification
•Expertise in HVAC / Plumbing & Fire Fighting project installation, commissioning and operations developed through 9+ years of experience