adnan momin

& Responsibility:
• Design, develop and modify company standards, procedures and best practices, serving on
international standards writing bodies.
• Play an active part in providing training courses and mentoring developing
engineer/associates/inspectors.
• Proactive team member of FFS assessment, risk based work scenario, failure investigation,
incident investigation.
• Provide consultations and engineering support to field Operations & Engineering in all aspects
of corrosion engineering viz; design, implementation, monitoring, inspection and trouble
shooting.
• Support the coordination and alignment of various discipline interfaces between the project
phases and direct the contractors design efforts accordingly taking into account safety, startup,
cost and constructability impacts.
• Establish professional work relationships with direct contractors and sub-contractors with any
technical queries and interpretation of scope, specifications and standards.
• Assist & develop equipment strategies based on findings, observation, and analysis and
engineering review.
• Plan, develop, guide and undertake risk based inspection of static equipments.
• Assess the probability of failure for identified damage mechanism based on operating
condition, material, failure history, previous inspection history & Internal & External
environment in line with Exxon Mobil RBI approach
• Perform and review installation/commissioning procedure of internal corrosion monitoring
system for both Online & Offline of Corrosion Coupons flush type, strip type, Multi disc
Ladder type coupon and ER probes.
• Prepare and review internal corrosion monitoring reports based on field inspection data
and calculate/list metal loss and Mills per year for further assessment and consideration.
• Identify piping/equipment/location/areas which are sound candidate for Thermal Spray coating
with Aluminum & composite wrapping or further Integrity inspections (dependent on degree of
corrosion) where required.
• Identify piping/equipment which is sound candidate for Cage Insulation, post concurrence
from Process Engineering, Operations & Safety Department.
• Recognized for identifying and implementing cage insulation system in plant facilities as one of
the approaches for reducing/eliminating CUI, periodic inspection, maintenance and
cost by 13%.
• Conduct field layout of piping system, identifying of CUI susceptible areas, weld packs,
damage insulation, branch connections, flanges, anchors, valves, and pipe support saddles.

& Responsibility:
• Deliver a high level of technical expertise to the Corrosion Control Subject Matter Experts
(SMEs) and field cross functional technicians; provide technical support for corrosion control.
• Provide support for the technical problems of the area operations, project management and
engineering design.
• Support DOT (Adhoc) inspections and internal audits.
• Direct and support the development and updating of company corrosion control standards and
develop, update and conduct training for corrosion policies and procedures including: Corrosion
Control Manual, internal coatings/linings, integrity management direct assessment procedures,
Thermal Spray Aluminum/Haste alloy operator qualification program, task qualification, and
new training course materials.
• Develop scopes, direct and support complex projects such as: ultrasonic thickness
monitoring surveys and other field surveys.
• Develop future mitigation plans resulting from in-line inspection and Internal Corrosion Site
Specific Plan inspections.
• Participate in Shutdown Inspection activities for Coating/Lining/Insulation for all Onshore and
Offshore Static equipment, piping systems and structural components.
• Deployed as Lead Coating & Insulation Inspector during Train-1/2, Train-5 and Train-6
shutdown for application of Thermal Spray Aluminum & Haste alloy coatings on Scrub
Columns, Regenerators, Demethanizer, Knock Out Drums and Regeneration Lines as a work of
scope of approximate 5520m2
.
• Recommend coating system for equipment/piping/structures subjected to atmospheric
corrosion, sweating and semi-sweating service and cryogenic services.
• Responsible for execution, supervision, monitoring, providing technical and QC support at
every phase of job.
• Recognized for planning, execution and timely project completion of 4 LNG tanks Online Perlite
filling in annular space and optimizing overall project QC cost by 4%.

& responsibility:
• Prepare job plans by identifying barriers/critical areas and minimizing it by proper planning &
positive approach.
• Executing the project provided by proper planning, analytical & logical thinking, analyzing &
identifying the risks, barriers & hazards involved, minimizing the same by HIRA to ALARP.
• Forming a back-up plan in case of deviation from planned procedure and steps at any phase of
the project.
• Liaison with the client for the job to be executed considering the time limit & resolving issues
encountered during execution and on stage of the project.

& Responsibility:
• To ensure and enforce that coating systems are applied according to the coating specification
and accurately and objectively report the technical aspects of coating project of all inspection
observation of all Oil production Offshore platforms owned by ONGC.
• Actively participate in the kick-off meeting to resolve and objectively discuss the issues of
specification and problems encountered on site to achieve a fair resolution.
• Liaison with the paint manufacturer’s technical representative to discuss, highlight and his
views regarding application procedure and workmanship.
• Coordinate with engineering, inspection & operations personnel for the turnaround work scope
identification & issues resolution.
• Coordinate with field contractor a detailed implementation plan of pre-turnaround,
turnaround & post-turnaround work.
• Supporting sites in performing root cause analysis in case of performance deviation.
• Provide daily/weekly/monthly/quarterly reports outlining site performance against plan &
appropriate analysis to relevant parties.
• Referring and keeping records of MSDS and MTDS and briefing the potential hazards of the
products being used to workers.
• Determine by measurement and observation that the applicator fully complies with the
specification requirement and that work performed matches the required standard of quality.
• Inspecting & verifying the surface prepared by Sand Blasting, Ultra high pressure Water
jetting (UHWJ) power tool & hand tool.
• Ensure that necessary test instruments and standards required are available at all times and
that each instrument is fully functional and properly calibrated.
• Performing and using destructive & non-destructive test instruments in failure analysis and
remedial procedures such as

& Responsibility:
• Supervision and monitoring of all activities involved in pipe laying & erection of high
pressure and low pressure natural gas line, as per the management safety system and
policy.
• Proactively handling construction team, providing guidelines, reviewing and inspecting all the
activities for effective completion of project.
• Efficiently managing project function and ensuring adherence to laid down project plans.

Specification Development & Review Specialized Tank Linings Fireproofing
Highlight of

test
 Solvent sensitivity test  Abrasive sieve test

test.

and safety policy of the Client and ensure that they are in good & safe working
condition.
• Prepare detailed daily/weekly/monthly maintenance plans of all machine and equipment used.
• Supervise and inspect every stage of the job.
• Rectify the deviations/defects with the most appropriate and practical method to bring it into
acceptable and laid down limits of the specification.
• Ensure that all the parts/structures/equipment is color coded in accordance with the governing
standards/Client.
• Ensure that materials/paints are disposed at assigned place to avoid pollution to the
environment as per the regulation.
• Conducting tool box meeting at the start of job every day, briefing the risks and hazards
involved in the job and communicating the way/method to avoid/minimize the hazards.

Conducting pre-start meeting with contractors/sub-contractors/representatives to deliver
company’s Safety Management system/policy/practice and monitor their compliance.
• Analyzing the risk and hazard involved in each of the process and minimizing the same by
HIRA to ALARP.
• Inspecting all the tools and devices used in Work at height activity as per the checklist prior
to start of work.
• Organizing, Conducting and giving safety training to Supervisor, Welder, Grinder, Sand
Blaster, Rigger, Hydra operator, Banksman and labor/helper about safe work practice and
procedure to followed while laying of Carbon Steel pipeline.
• Identifying and assisting the management, the needs of training for all levels of site personals.
• Performing, conducting and carrying out safety awareness program to all concerned with the
project.