Senior Mechanical Engineer
Khatib & Alami Consultant
Total years of experience :16 years, 2 Months
• Undertake inspections on site in accordance with the discipline related inspections and test plans (ITP's).
Attend to Inspection Requests (IR's) submitted by the contractor and take appropriate action in a timely manner.
• Inspect materials delivered and report on quantity and technical compliance.
• Monitor quality of works and assess the safety at site including health and environmental issues, ensuring the same complies with contracts / QCS specifications, safety and health risk assessment and environmental mitigating measures respectively on a daily basis.
• Maintain records for daily activities on site including progress photos and ensure they are readily available for inspection as and when required.
• Prepare Surveillance Report(s) for deficiencies of work found at site that are believed to have failed or if the contractor is not complying with verbal instructions and subsequently complete a Non Conformance Report (NCR) if required in view of the development of events.
• Check and ensure effective co-ordination between discipline related works and all other disciplines.
Provide technical input and experiences to resolve any discipline related issues on site that may arise.
Monitor the contractor’s (ITP's) and quality plan(s) in regards to discipline related works.
Inspect materials delivered and report on quantity and technical compliance.
• Coordinate with the team on site to ensure that contractual obligations are met.
Gives clear, concise and understandable instructions to Contractors to avoid abortive works and errors. Follows up with Staff to ensure compliance with requirements.
Prepare Snag Lists and follow up remedial works until works found satisfactory.
Monitor the contractor’s (ITP's) and quality plan(s) in regards to discipline related works.
• Monitor the contractor’s (ITP's) and quality plan(s) in regards to discipline related works.
• Provide technical assistance during construction contract bidding, proposal evaluations, negotiation, and post-award construction administration services.
• Review the documents prepared by the MOJ's consultants, including, but not limited to their design reports, calculations, drawings, and specifications.
• Provide technical advice to other Engineering Department Sections and Units and other Departments.
Perform field inspections and provide field support and troubleshooting during the construction process.
Prepare scope of work descriptions and value engineering.
• Provide technical input and experiences to resolve any discipline related issues on site that may arise.
• Monitor the contractor’s/consultant's (ITP's) and quality plan(s) regarding discipline related works.
• design review of drawings, calculations and specifications covering HVAC, smoke management, irrigation, Plumbing and Firefighting.
• Attending frequent Technical and Construction Meetings.
• Drafting and preparing related technical letters with respect to contractual obligations and aspects.
• Evaluation of contractor’s claims, reviewing of change orders
• Review and approved Testing and Commissioning reports, “AS BUILT” Drawings”, Operation and Maintenance Manual, including project final handover to end user.
• Establish and implement “best practices” and focuses on continuous improvement.
• Study, analyze and evaluate tender documents from a technical point of view in order to identify risk factors, ensuring that technical terms comply with the relevant standards for the overall risk assessment and bid decision.
• Solicit and follow-up with the design/ drafting section during tender preparation for method optimizing in order to reach cost efficiency.
• Provide all the necessary project clarifications/ information upon project award to the Project Manager as per the project budget; advise the Project Manager on contractual rights, remedies which has been taken into consideration during tendering.
Responsible for the coordination between planning department & site engineers to insure that the project is on-going in that’s right way.
•Experience in large urban development projects which includes infrastructure services such as Sewage Treatment Plant (STP), Potable Pumping Station and distribution, Storm water network
Review IFC (Issued for Construction) Drawings for firefighting, plumbing and Heating, Ventilation and Air-Conditioning System (HVAC) for the correctness of the design.
•Assisting in various materials review and quality approval (including but not limited to HVAC, Firefighting, sanitary, metering system, Pneumatic Solid Waste and BMS … etc.).
•Numerous Method Statements technical review and approval, as well as assuring its compliance with the Project’s specifications and quality guidelines.
•Following up and monitor schedule of submittals and progress as per the approved program of work.
•Following up with the contractors on the procurement schedule and long lead items.
•Attending frequent Technical and Construction Meetings.
•Drafting and preparing related technical letters with respect to contractual obligations and aspects.
•Progress measurement and certification of contractor’s invoices
•Evaluation of contractor’s claims, preparation of change orders,
•Preparing and producing Monthly Progress Report as well as Monthly Construction Report.
•Direct supervision for all mechanical works including but not limited to: HVAC, Plumbing, Fire Protection, solid waste systems, metering system & BMS inspections, field testing & trouble shooting of every day site problems …etc.
•Direct supervision of infrastructures works such as pipe alignment and laying, welding inspection, testing, manholes inspection & levelling, and backfilling as related to LPG, chilled water piping, Storm Water Drainage, and Sanitary Sewer systems.
•Issuing NCR’s (Non-Conformity Report) for any discrepancy in quality of installations.
•Assisting in technical review and approval of several subcontractors for mechanical works.
•Daily site monitoring, reporting and quality assurance.
•Follow up and coordination with the site engineers regarding any technical issues and construction problems at sites.
•Provide complete back office and direct technical support to the site engineers for all sites in the region.
•Follow up and close coordination with the nominated subcontractors for work progress and quality.
•Ensure all works carried out comply with the Mechanical drawings and project specifications as stipulated.
•Evaluate and recommend feasible construction methodology as per site conditions and as per contract requirements.
• Review and approved Testing and Commissioning reports, “AS BUILT” Drawings”, Operation and Maintenance Manual, including project final handover to clients.
ISP for Ministry of Interior
Integrated strategic (ISP) is one of the most prestigious projects for Ministry of Interior. This project will be undertaken on different sites all over the Kingdom of Saudi Arabia. The project will provide more than 574, 000 sq.m of built up area on 900, 000 sq.m of developed areas. Cost of the project is around
4, 300, 000, 000 SR.ISP consists of 182 buildings, 142 of which are considered ‘small buildings’ such as Regional Police Station, Civil Defense Building, Police Station, High Way Security Centre etc. The buildings construction values varies between 15 million and 117 million. The remaining 42 buildings are considered medium to large and include: Administration building, Governorate Building, Attorney Building, Drug enforcement building etc.
Supervision for mechanical works for 07 projects in Al Baha area.
Plot 2021 & 3007 is two towers each one is residential commercial buildings with area 1000 to 1200 square meters with 10 floors, 2 basements, mezzanine and Helipad.
Key Job Responsibilities:
• Preparing shop drawing and redesign if needed for all mechanical systems (HVAC, FIRE FIGHTING&PLUMBING) also executing all above mentioned systems for plot no.3007&2021
• Prepares all systems details such as schematics, calculations, schedules and connections.
• Works and confers with Head of Mechanical Section, Project Mangers, Structural and Architecture departments and other engineers to collectively ensure requirements of projects are met
• Prepare materials and equipment to ensure that they are in accordance with the specifications. Coordinate with the Head of Department/Design Staff and obtain their comments prior to action.
• Meets with Local Authorities where required and attend site visits by Local Authorities in order to clarify ambiguities and queries to facilitate a smooth approval process.
• Attends regular meetings with the Construction team, and the Client to report on progress and help resolve issues where they arise.
• initiate/ prepare Engineering/Material submittals, Vendor approvals, RFI’s/Method Statement etc.,
• Ensuring that the quality of material and installation of works are in accordance with the acceptance criteria, specifications, approved materials and methods of installation approved for the project
• Manages and maintains effective relationships with the internal and external customers, consultants, contractors and subcontractors and any other involved parties on the project.
• Determines the size of HVAC ducting, and preparation of ducting layout and conducts friction loss calculation of duct work.
• Determines the size of water and chilled water piping, preparation of piping layout and conduct pump head calculations for the chilled water piping.
• Prepares the control system layout and sequence of operation, equipment schedules.
• Reviews of suppliers’ documents and liaise with suppliers for technical inputs and inquiries.
• Maintains and stores project records, data and documents.
is two
Rod Al Farag Tunnel for pumps cables, infra-structure work
Underground pipe lines, Ducts and culverts, powerful hydraulic jacks are used to push specially designed pipe through the ground behind a shield and at the time. Excavation taken place within the shield, the method provides a fixable Structural watertight finished pipe line, as the tunnel is excavated pipe in the range of 150mm to 3000mm can be installed. To install a pipeline thrust and reception pits are constructed usually at manhole positions, the diminutions and construction of a thrust pit may vary according to the specific Requirement, A thrust wall is constructed to provide a Reaction against the jack, High pressure jacks provide the substantial force require for jacking concert pipes.
Key Job Responsibilities:
•Digging tunnels company up to 3.25 Dia. meters using pip jacking method.
•Pipe jacking generally referred to in the smaller diameters as micro tunneling is a technique for installing An in-depth understanding and monitoring of the mechanical and electrical installation and safety standards applicable to the project.
•Coordinate on a technical basis with the existing stakeholders to resolve any outstanding technical issues to enable design and construction to commence or evolve.
•Preparing As- built drawings, operation and maintenance manuals.
•Carrying out all infrastructure mechanical piping (Drainage, soil, waste water, irrigation, domestic water, firefighting, chilled water and nonpotable water.
(