مجموع سنوات الخبرة: 14 سنوات, 2 أشهر
فبراير 2015
إلى حتى الآن
SV QA/QC
في RHEINMETALL INTERNATIONAL ENGINEERING
البلد :
الجزائر - عنابة
• Responsible for NDT inspection of radiographic inspection, magnetic particle testing, penetrate testing, heat treatment, welding inspection and visual inspection of pipe lines, boilers, pressure vessels, oil tanks, reactors, columns and heat treatment.
• Running all sub-contractor welding activities on/off site fabrication shops.
• Painting / coating inspection of steel structural works, pipeline, pressure vessels, offshore vessels, new building & repairing ships.
• Responsible for stage wise painting / coating inspection. Undertake QC painting /coating activities in the work place
• Monitor weather condition for surface preparation and painting / coating application.
• Running all sub-contractor welding activities on/off site fabrication shops.
• Painting / coating inspection of steel structural works, pipeline, pressure vessels, offshore vessels, new building & repairing ships.
• Responsible for stage wise painting / coating inspection. Undertake QC painting /coating activities in the work place
• Monitor weather condition for surface preparation and painting / coating application.
أكتوبر 2014
إلى فبراير 2015
QC Welding & NDT Inspector
في Bonatti SPA
البلد :
الجزائر
Responsible for NDT inspection of radiographic inspection, magnetic particle testing, penetrate testing, heat treatment, welding inspection and visual inspection of pipe lines, boilers, pressure vessels, oil tanks, reactors, columns and heat treatment.
• Scheduling and organizing specialist project execution;
• Running all sub-contractor welding activities on/off site fabrication shops.
• Support at site/ monitoring the specialist works at site within his/her specialist area during erection and commissioning phase.
• Evaluation of radiographic films as per ANSI B 31.3. and visual inspection of pipelines, structural steel work.
• Film interpretation in accordance with relative specifications, preparing specific procedures, NDT reports, inspection of rotary equipments for various semi-submersible and jack-up drilling rigs.
• Reviewing of the test procedure, welding procedure specification, PQR, WQT method and statement.
• Preparation of requests and reports for the client and co-ordinate with client responsibilities.
• Qualify the welders as per project requirements.
• Check radiographic films of classification, radiographic sensitivity type for IQI, subject and film contrast type of exposure.
• Checking for ensure that welders are qualified to the WPS.
• Prepare NDT reports and technical documentation for all welding
• Scheduling and organizing specialist project execution;
• Running all sub-contractor welding activities on/off site fabrication shops.
• Support at site/ monitoring the specialist works at site within his/her specialist area during erection and commissioning phase.
• Evaluation of radiographic films as per ANSI B 31.3. and visual inspection of pipelines, structural steel work.
• Film interpretation in accordance with relative specifications, preparing specific procedures, NDT reports, inspection of rotary equipments for various semi-submersible and jack-up drilling rigs.
• Reviewing of the test procedure, welding procedure specification, PQR, WQT method and statement.
• Preparation of requests and reports for the client and co-ordinate with client responsibilities.
• Qualify the welders as per project requirements.
• Check radiographic films of classification, radiographic sensitivity type for IQI, subject and film contrast type of exposure.
• Checking for ensure that welders are qualified to the WPS.
• Prepare NDT reports and technical documentation for all welding
يونيو 2013
إلى أكتوبر 2014
QA/QC
في ferrostaal Industrieanlagen GmbH
البلد :
الجزائر
Control of drawings and NDT inspection.
• Material Inspections
•Followed mechanical assembly.
•Followed welding.
•Verify the availability and adequacy of the material and drawing
•Control construction of the spherical tanks
•Follow-up and preparation of the all tests for spherical tanks.
•Preparation of the documents for hydrostatic, pneumatic test for spherical tanks and follow-up off the good progress of the tests.
• Solve the cases of no-conformity
QA/QC piping in charge of the pipelines (mechanical, welding, testing)
•Material Inspections.
-Responsible for NDT inspection of radiographic inspection, magnetic particle testing, penetrate testing, heat treatment, welding inspection and visual inspection of pipe lines, boilers, pressure vessels, oil tanks, reactors, columns and heat treatment.
-Scheduling and organizing specialist project execution;
-Running all sub-contractor welding activities on/off site fabrication shops.
-Support at site/ monitoring the specialist works at site within his/her specialist area during erection and commissioning phase.
-Evaluation of radiographic films as per ANSI B 31.3. and visual inspection of pipelines, structural steel work.
-Verifying WPS & witnessing welder performance qualification; pre & post weld inspection as ASME Section XI; carrying out radiography & evaluation of radiographs as per ASME Section VIII.
-Carry out NDT methods in inspecting weld elements, turbine components, storage tanks, pressure vessels and piping elements.
-Responsible for a QC Inspector from executing the work following the Inspection & Test Plan, method of statement & risk assessment.
-Preparing & verifying WPS & Welder Qualification Test based on API 1104, AWS-D1.1.
-Execution of NDT job as per requirements and satisfaction of clients/representative, welding inspection, welder qualification, QA/QC activities, preparation of reports and co-ordination with the client representatives, monitoring pre & post weld heat treatment, interpretation & evaluation of radiographs, carrying out RT, MPT, LPT, on ASME coded pressure vessels and heat exchangers, storage tanks, power piping and process piping, pre & post weld inspection preparation & maintaining reports at various projects.
-Responsible for, site coordination for NDT jobs, radiographic testing, magnetic particle testing, MPI testing, preheat and post heat treatment, for piping, boilers, pressure vessels and others.
-Preparation of daily reports on various job activities including NDT consumables.
•Control of drawings, isometrics and P&ID.
• Material Inspections
•Followed mechanical assembly.
•Followed welding.
•Verify the availability and adequacy of the material and drawing
•Control construction of the spherical tanks
•Follow-up and preparation of the all tests for spherical tanks.
•Preparation of the documents for hydrostatic, pneumatic test for spherical tanks and follow-up off the good progress of the tests.
• Solve the cases of no-conformity
QA/QC piping in charge of the pipelines (mechanical, welding, testing)
•Material Inspections.
-Responsible for NDT inspection of radiographic inspection, magnetic particle testing, penetrate testing, heat treatment, welding inspection and visual inspection of pipe lines, boilers, pressure vessels, oil tanks, reactors, columns and heat treatment.
-Scheduling and organizing specialist project execution;
-Running all sub-contractor welding activities on/off site fabrication shops.
-Support at site/ monitoring the specialist works at site within his/her specialist area during erection and commissioning phase.
-Evaluation of radiographic films as per ANSI B 31.3. and visual inspection of pipelines, structural steel work.
-Verifying WPS & witnessing welder performance qualification; pre & post weld inspection as ASME Section XI; carrying out radiography & evaluation of radiographs as per ASME Section VIII.
-Carry out NDT methods in inspecting weld elements, turbine components, storage tanks, pressure vessels and piping elements.
-Responsible for a QC Inspector from executing the work following the Inspection & Test Plan, method of statement & risk assessment.
-Preparing & verifying WPS & Welder Qualification Test based on API 1104, AWS-D1.1.
-Execution of NDT job as per requirements and satisfaction of clients/representative, welding inspection, welder qualification, QA/QC activities, preparation of reports and co-ordination with the client representatives, monitoring pre & post weld heat treatment, interpretation & evaluation of radiographs, carrying out RT, MPT, LPT, on ASME coded pressure vessels and heat exchangers, storage tanks, power piping and process piping, pre & post weld inspection preparation & maintaining reports at various projects.
-Responsible for, site coordination for NDT jobs, radiographic testing, magnetic particle testing, MPI testing, preheat and post heat treatment, for piping, boilers, pressure vessels and others.
-Preparation of daily reports on various job activities including NDT consumables.
•Control of drawings, isometrics and P&ID.
مايو 2012
إلى مايو 2013
Piping Engineer
في SAMSUNG.Co,. Ltd
البلد :
الجزائر
• Painting / coating inspection of steel structural works, pipeline, pressure vessels, offshore vessels, new building & repairing ships.
Responsible for stage wise painting / coating inspection.
Undertake QC painting / coating activities in the work place for daily basis.
Monitor weather condition for surface preparation and painting / coating application.
Prepare “inspection & test plan” (ITP) for specific project / company requirements/ surface preparation and painting / coating procedure
Hot dip galvanizing coating inspection in galvanizing plant.
Execute Painting / coating inspection work as per company / project inspection test plan.
To check and monitor all painting / coating related works and ensure all final products meet in accordance with company procedure, client requirement and international codes.
Responsible for incoming coating / painting material inspection and has to ensure whether these materials suits to meets the requirements of project specifications.
Prepare all necessary QA / QC painting / coating documents and handed over to clients review.
Review of calibration status of IMTE items.
To undertake test qualifications for spray painters, brush painter’s hydro blasters & abrasive blasters.
Co-ordinate with the paint manufacturer technical representative on daily basis.
•Material Inspections.
•Give assistance to mechanical superintendent in the discussion with the proponent representative and construction contractor where necessary.
•Coordinate with the Safety Officer on safety related matters.
•Solve the cases of no-conformity.
Responsible for stage wise painting / coating inspection.
Undertake QC painting / coating activities in the work place for daily basis.
Monitor weather condition for surface preparation and painting / coating application.
Prepare “inspection & test plan” (ITP) for specific project / company requirements/ surface preparation and painting / coating procedure
Hot dip galvanizing coating inspection in galvanizing plant.
Execute Painting / coating inspection work as per company / project inspection test plan.
To check and monitor all painting / coating related works and ensure all final products meet in accordance with company procedure, client requirement and international codes.
Responsible for incoming coating / painting material inspection and has to ensure whether these materials suits to meets the requirements of project specifications.
Prepare all necessary QA / QC painting / coating documents and handed over to clients review.
Review of calibration status of IMTE items.
To undertake test qualifications for spray painters, brush painter’s hydro blasters & abrasive blasters.
Co-ordinate with the paint manufacturer technical representative on daily basis.
•Material Inspections.
•Give assistance to mechanical superintendent in the discussion with the proponent representative and construction contractor where necessary.
•Coordinate with the Safety Officer on safety related matters.
•Solve the cases of no-conformity.
يناير 2012
إلى مايو 2012
QC Engineer ndt
في sarl comisk
البلد :
الجزائر
-Following welding activity, planning RT non destructive testing, interpreting RT films according to API 1104, ASME and AWS D1.1, at the end I’ve comprised all my activity and put together the finaldocumentation on this NDT area Black Sea.
-Part of a field inspection team assigned at fabrication yard tasked to carry out various NDT methods to fabricated offshore structure components such as piles, buoys, jackets, FPSO modules, jackets, decks, mud mats, deep water manifolds, risers, and piping. -Performing NDE inspections and examinations on rotating and pressure retaining equipment in accordance with company standards, customer specifications and ASME Section IX requirements. -Assigned at locations onshore /offshore performing various NDT methods for the testing of welding elements, pipelines, process piping, hulls and pressure vessels.
-Reviewing and revising NDT related documents; and training of Junior Inspectors. -Also carry out macro etching, hardness testing, welding, cutting, and marketing of company services. -Implementation of International Standards coordination as RT for GSP, EN and ASME, ANSI B.31.1, ASTM, API 1104; 650, AWS D1.1 & D1.8.
-Part of a field inspection team assigned at fabrication yard tasked to carry out various NDT methods to fabricated offshore structure components such as piles, buoys, jackets, FPSO modules, jackets, decks, mud mats, deep water manifolds, risers, and piping. -Performing NDE inspections and examinations on rotating and pressure retaining equipment in accordance with company standards, customer specifications and ASME Section IX requirements. -Assigned at locations onshore /offshore performing various NDT methods for the testing of welding elements, pipelines, process piping, hulls and pressure vessels.
-Reviewing and revising NDT related documents; and training of Junior Inspectors. -Also carry out macro etching, hardness testing, welding, cutting, and marketing of company services. -Implementation of International Standards coordination as RT for GSP, EN and ASME, ANSI B.31.1, ASTM, API 1104; 650, AWS D1.1 & D1.8.
يناير 2010
إلى يناير 2012
QA / QC Engineer .NDT)
في all nations
البلد :
الجزائر
• (QA/QC) ANSI, API, ASME, ASTM, AWS piping. Industrial mechanic. Petrochemical mechanic.
•the control non descrubtive (NDE) (RT, PT, MT, VT, UT), ( PWHT) post weld heat treatment and, (PMI) Positive material identification.
• Interpret / Review NDT Reports and maintain all related file and Reports .
•Familiarly with interpretation of drawing, welding Symbols.welding imperfections.
•Preparation and handover of final test packs and As Built Drawings
•the control non descrubtive (NDE) (RT, PT, MT, VT, UT), ( PWHT) post weld heat treatment and, (PMI) Positive material identification.
• Interpret / Review NDT Reports and maintain all related file and Reports .
•Familiarly with interpretation of drawing, welding Symbols.welding imperfections.
•Preparation and handover of final test packs and As Built Drawings
انشر على فيسبوك
انشر على تويتر
مشاركة عبر البريد الإلكتروني