Ajeet سينغ

1‑ identifies and analyzes equipment or machinery failure and take corrective action.
2‑ Maintain communication and relations as are necessary to report on the status of matter.
3‑ Programming of safety equipment’s and placing their input
command in ladders logics.
4‑ Working of LT DG and doing the Monthly maintenance of it.
5‑ Create appropriate procedure and practices to reduce machine breakdown.
6‑ Performing the activity of the control wiring of VFD
7‑ Performing preventive maintenance of DG and Compressor
8‑ Performing preventive maintenance equipment like Motors,
pumps, chillers.
9‑ Programing of servo drive along with plc.
10‑ Programing of drives and implementation in PLC program.
11‑ Coordinates work performed by outside contractors, vendors and
engineering consultants.
12‑ Planning and undertaking scheduled maintenance.
13‑ Managing budgets, making of the spare/critical spare
records.
14‑supervising the electrician and technician.
15‑ Managing stocks and supplies and equipment’s
16‑ Ensure that the facility’s equipment’s and machine are maintained properly.
17‑ Keeping a record of all maintenance work and rectification.
18‑ Keeping a record of projects and coordinating work with vender and contractor as per the Company needs.
19‑ Calculation of load for the future projects.
20- Synchronizing o f t h e D G s e t s 21‑ Inspection and checking of the DG sets
22‑ Working in a project of new installation of the tank farm and the installation of the pump and motor, lightning, earthing system.
23- Develop, Implement and maintaining standard operating
procedure.
24- Inspecting of the fire protection system of the entire facilities under supply at regular interval and set up preventive maintenance plan for the system.

1‑identifies and analyses equipment or machinery failure and take corrective action.
2‑Maintain communication and relations as are necessary to report on the status of matter.
3‑Programming of safety equipment’s and placing their input
command in ladders logics.
4‑Working of HT DG and LT DG.
5‑Performing preventive maintenance of all plants. 6‑ Programming of servo drive along with plc.
7‑Programming of drives and implementation in PLC program.
8‑Coordinates work performed by outside contractors, vendors and engineering consultants.
9‑ Planning and undertaking scheduled maintenance.
10‑Managing budgets.
11‑Maintaining statistical and financial records.
12‑Managing stocks and supplies and equipment’s.
13‑Ensure that the facility’s equipment’s and machine are
maintained properly

1‑Products handled: White oil products such as MS, HSD, &
ETHANOL,
2‑Gauging and finalization of product tanks.
3‑Sampling of shore tanks to check & monitor the quality of the product.
4‑Operation of tilted plate oil water separator and troubleshooting
5‑Carrying out Inter tank transfer and pipeline transfer operations as per client requirement
6‑Performing Electrical work and doing checklist according to the OSID std.
7‑ Working in a tank farm and taking SOR (safety observation round) round and checking of the safety equipment
8‑ Keeping a record of projects and coordinating work with vender and contractor as per the Company needs.
9‑ Performing electrical maintenance of the transformer and working with the Electricity board
10‑ Keeping records of energy consumption and implementing the project for saving of energy like installation of the solar panel
11‑ Making of work permit and JRA (Job Risk Analysis) and Completion of work with the safety
12- Making of stocks, ullage in tanks.
13- planning work for the operator.
14- doing shipment duty and pigging operation
15- Performing major breakdown, doing maintenance of machine.
16- handling of the cargo like gasoline, deisel, high sulfur deisel, low hydrocarbon, base oil( SN500, SN150, BS150).

1- Analyzing and rectification of the breakdown of machinery parts
2- Keeping records of the breakdowns and performing the preventive maintenance activity of machines
3- Worked on different types of AC, DC and servo drives, done their power and Control wiring.
4- Different types of sensors and relays connection
5- Knowledge of DC and servo motors. Done maintenance of DC motors
6- Done connection and programming of temperature controller, heater, SSR, Thermocouple
7- Worked on fiber coloring machine, knowledge of UV lamp, magnetron and photocell.
8- Worked on LT breakers, UPS and troubleshooting.
9- Knowledge of electrical wiring, done electrical wiring
10- Maintenance & Operation of chillers, cooling towers, pumps, fans, blowers.
11- Maintenance of Utility Equipment
12- Experience in electrical distribution panel
13- Making of LV panel along with star- delta connection
14- Installation and commissioning of VDF and programing of the panel
15- Installation of temperature controller for the hearting of the extruder