رونالد رياليس

• Conducts training for students in Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GTAW), Flux cored arc welding (FCAW\} and Gas metal arc welding \{GMAW) processes.
• Plan, prepare and deliver instructional activities that facilitate active learning experiences.
• Preparing of session plans every day as per pacing schedule.
• Establish and communicate clear objectives for all learning activities.
• Prepare the classroom for class activities.
• Provide a variety of learning materials and resources for use in educational activities.
• Identify and select different instructional resources and methods to meet students' varying needs.
• Instruct and monitor students in the use of learning materials and equipment.
• Use relevant technology to support instruction.
• Observe and evaluate student's performance and development.
• Provide appropriate feedback on work.
• Encourage and monitor the progress of individual students.
• Maintain accurate and complete records of students' progress and development.
• Prepare of training program includes both theoretical and practical examination per welding process.
• Invigilator for LXR online exam and practical test.
• Performs dimensional and visual check of test specimens and judges them according to applicable codes and standards or project specification.

• Review contract specification / technical requirements, drawings etc.
• Review Inspection & test plans in accordance with international codes and Client Specification.
• Review Project Weld drawing, weld and NDT map and welding Procedure Specification.
• Review and witness WPS, PQR, Welders & Welding Operator Qualification.
• Review and control the fabrication activities as per the ITP / Contract Specification / codes and Approved Drawing.
• Executing inspection and control of RAW materials, welding consumables.
• Execute Welding, NDE Inspection Radiographic film interpretation.
• Overall quality control project responsibility such as interaction and
Coordination with clients, design planning, projects production, welding.
& NDT in Process inspection verification stage from material Identification.
• Perform Surveillance during inspection to verify compliance with specified yard procedure including preheat, inter pass temperature control, and post heat requirements.
• Witnessing dimension check for completed weld as per drawing and Specification.
• Review of NDT reports and Witness of NDT Inspections
• Witnessing of piping chemical flushing wherever required (Ex). Portable water Tanks.
• Witnessing Hydro testing of Piping system and Tanks and pressure.
• Operators are working in accordance with the approved welding procedure.

• Perform quality control through checking testing, Inspection and witnessing of all the maintenance activities to ensure conformance to the existing specifications and drawings as approved by client.
• Conduct rotating and static inspection.
• Doing mechanical inspection on tanks, Thickeners and Vessels.
• Witnessing coupling alignment.
• Rubber lining inspection of tanks and spool through spark testing. Peel test and Visual inspection.
• Ensure that all drawings to be used in fabrication and erection are current revision.
• Record all necessary inspection data.
• Ensure that all NDE (non-destructive examination) requirements are carried-out prior releasing for hydro testing and painting.
• Perform non-destructive test such as DPT and UT gauging.
• Perform all non-destructive tests of welding works at site including shop fabrication.
• Witnessed torquing and conduct BTC on equipment’s manhole covers and drain nozzle covers and all flanges.
• Ensure that all welds were accepted thru acceptance criteria ASME B31.3 and AWS D1.1
• Final inspection of autoclave, tanks, vessels prior to box-up and de blinding points.
• Conduct gasket and rubber lining inspection.
• Assigned to H2S plants, MS and Scrubbers area and line 1 and line 2 HPAL area.
• Review and sign all necessary records and reports.

• Generating and reviewing DWCS (Daily welding control sheet) for welding erection and temporary weld for blinding.
• Conduct toolbox meeting before the start of the activity.
• Allocation of welder and issuance of WCRC.
• Monitoring of Punch list and repair log on site erection.
• Conduct welding inspection for blinding and line checking of piping line prior for hydro testing.
• Combined welding techniques, knowledge of metallurgy and engineering requirements to produce quality work.
• Supervise and train welders to improve quality and quantity of performed to enhance skill and productivity via improved welding procedures.
• Consistently ensured that the job was done with the best quality as well being on budget and schedule, and jobs were safe for workers and that all workers were following safety rules.
• Bolted, clamped, and tack-welded parts to secure components prior to welding.
• Supervised and coordinated welding repairs for track and other onsite projects.

• Conducts training for welder and trainees in Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GTAW) processes, both structural and piping manpower requirement of a specified project.
• Plan, prepare and deliver instructional activities that facilitate active learning experiences.
• Develop schemes of work and session plans
• Establish and communicate clear objectives for all learning activities.
• Prepare the classroom for class activities.
• Provide a variety of learning materials and resources for use in educational activities.
• Identify and select different instructional resources and methods to meet students' varying needs.
• Instruct and monitor students in the use of learning materials and equipment.
• Use relevant technology to support instruction.
• Observe and evaluate student's performance and development.
• Provide appropriate feedback on work.
• Encourage and monitor the progress of individual students.
• Maintain accurate and complete records of students' progress and development.
• Prepare the training program includes both theoretical and practical examination per welding process.
• Performs dimensional and visual check of test specimens and judges them according to applicable codes and standards or project specification.

▪ Studies drawings and other pertinent papers for preparation for fabrication and erection drawings.
▪ Supervise, organize and plan activities to ensure smooth fabrication and construction of structures within the stipulated schedule.
▪ Review technical drawings and advise engineering of any discrepancies before commencement of fabrication works.
▪ Perform MTO and update progressively to ensure proper control of material procurement and usage.
▪ Ensure that manpower is effectively deployed to deliver the products timely.
▪ Resolve any technical problems or issues faced at the work site
▪ Study and evaluate the work sequences and methods of the Department and explore new ideas to improve quality and productively.
▪ Responsible for preparation of red line mark ups to Engineering for AS BUILTS submission to clients.
▪ Liaise with clients’ representatives and coordinate with other department supervisors for effective coordination of all works.
▪ Ensure that Safety, Health and Environmental operating procedures are followed and counsel staff about compliance as necessary.
▪ To implement the Company’s safety policy and safety management system and to enforce legislated safety requirement and the Company’s safety rules and regulations at site.
• Directly responsible for ensuring qualified welders and welding operators are working in accordance with approved welding procedure data sheets on the training school.
• Provides work direction for my welding trainers and ensure that a high-quality product is being produced.
• Responsible for the set ups and operations of various welding equipment.
• Organizes and schedules work, assigns job duties and monitor progress to ensure that assigned operations are performed in a smooth and efficient manner.
• Develops, recommends, and implements new procedures and methods to improve welding operations and efficiencies.
• Supervises and manages support personnel as it relates to all projects or related work, establishes performance requirements, clarifies responsibilities of those supervised, conducts performance appraisals and plans for individual employee improvement.
• Keeps co- workers informed of important developments, potential problems, and related information necessary for effective management.
• Performs other duties as apparent or assigned.

• Ensures the quality of welds we performed.
• Ensures U.T.R.T is 100% passed and no coming repair.
• We always follow the instruction of our foreman so that we ensure the quality of our weld.
• Before welding I clean the metal to make sure that there is no oil, dirt or water and chipper to clean, then after cleaning we can start welding.
• Full weld of frames, brackets, gusset plate, connector plate, beams for pipe rack structure,
• Understand various weld symbols on blueprints and understand size of fillet weld,
• Follow the workplace safety.
• Practice housekeeping in work area.

• Conducts training for welder and trainees in Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GTAW) and Flux Cored Arc Welding (FCAW) processes, both structural and piping manpower requirement of a specified project.
• Enforce a competitive and reliable program for welder trainees for various welding processes under strict compliance and applicable design code/standard and project specification in preparation for the actual welder qualification test (WQT). Training program includes both theoretical and practical examination per welding process.
• Performs dimensional and visual check of test specimens and judge them according to applicable codes and standards or project specification.
• Handle and assist Procedure Qualification Tests (PQT), welders and Welding Operators Qualification and Testing Center.