Amer Ahmad Kafaween, Senior Civil Engineer

Amer Ahmad Kafaween

Senior Civil Engineer

AYESA

Lieu
Arabie Saoudite - Riyad
Éducation
Baccalauréat, Civil Engineering
Expérience
9 years, 9 Mois

Partager Mon CV

Empêcher usager


Expériences professionnelles

Total des années d'expérience :9 years, 9 Mois

Senior Civil Engineer à AYESA
  • Arabie Saoudite - Jeddah
  • Je travaille ici depuis août 2020

Senior Civil Engineer at AYESA consulting company
my duties are and not limited the below:
1- review the documents and materials.
2- Review the contractor invoice.
3- supervision the work and insure its done as per specification and drawings.
4- Acting as construction manager and supervisor for 7 engineers.
5- help contractor to finish the work as per plan time.
6- Raise NCRs and SOs if the work didn't done as per specification and critical issues.
7- send letters for contractor whenever its need.
8- Review the work inspection and material inspection.
9- attend the meetings with client and update him regarding the works.

project construction manager à AYESA
  • Arabie Saoudite - Jeddah
  • Je travaille ici depuis février 2023
Cost Engineer à Consolidated Contractors Company
  • Arabie Saoudite - Riyad
  • octobre 2017 à août 2020
Coordinator Engineer à Consolidated Contractors Coompany (CCC) in Joint Venture name BACS
  • Arabie Saoudite - Riyad
  • avril 2015 à septembre 2018

I am working in Concrete center support (Facilities support department) as a concrete coordinator engineer in BACS Consortium for all site in Riyadh Metro Project (RMP), the project have 85 stations, Viaduct Spans & depots.
my work is
1-coordinator between suppliers (Saudi Ready Mix (SRM), Al Falwa Ready Mix & BACS plant) to apply concrete and support sites in project for concrete work.
2- coordinate between Sites in project and provide plan to apply concrete on all sites in project without delay, we are take plan(weeks look ahead & 6 months look ahead) from delivery group and try to make the best plan to apply concrete regarding the plan.
3- account the quantities for all sites in project and each delivery group (Deep under ground, elevated stations ... etc.).
4- do trial mix for special concrete requested from sites and making approved from QC management to be ready for sites.

Concrete Coordinator Engineer à Consolidated Contractors Coompany (CCC) in Joint Venture name BACS
  • Arabie Saoudite - Riyad
  • mars 2017 à septembre 2018

I am working in Concrete center support (Facilities support department) as a concrete coordinator engineer in BACS Consortium for all site in Riyadh Metro Project (RMP), the project have 85 stations, Viaduct Spans & depots.
my work is
1-coordinator between suppliers (Saudi Ready Mix (SRM), Al Falwa Ready Mix & BACS plant) to apply concrete and support sites in project for concrete work.
2- coordinate between Sites in project and provide plan to apply concrete on all sites in project without delay, we are take plan(weeks look ahead & 6 months look ahead) from delivery group and try to make the best plan to apply concrete regarding the plan.
3- account the quantities for all sites in project and each delivery group (Deep under ground, elevated stations ... etc.).
4- do trial mix for special concrete requested from sites and making approved from QC management to be ready for sites.

Site Engineer (Civil Engineering) à Consolidated contractors company
  • Arabie Saoudite - Riyad
  • avril 2015 à septembre 2017

I am working in Riyadh Metro Project (RMP) is the greatest project in Kingdom Saudi Arabia (KSA).
I am working in Elevated stations departments in stations delivery group as a site engineer in four stations (1J2 station, 1G2 station, 1G1 station & 1H2 Station).

The elevated stations consisting of basement boxes, Mezzanine floor & Platform floor.


my work in department / station as the following:
1- check all drawing in site (IFC drawing, Field Sketch, Shop drawing ... etc.).
2- check the working in site it as drawings with safely procedure and good quality.
3- check the materials requested for site if it approved or no as a specifications.
4- coordinate with MEP (Mechanical, Electrical & Plumping) department to the work without double work from civil department and MEP departments.
5- request materials need it for station and double check if it as specification or no.
6- check the surveyor points in site by surveyor and drawings and make SWR (Survey work request)
7- make WIR (Work Inspection Request) for consultant (RMTC) to check the elements in site before do next step in work.
8- make good plan for station what is first priority requested in site to keep good progress (daily plan, weekly plan, 3 weeks look ahead plan & 6 months look ahead plan).
9- I was working in night shift approximately 8 months alone and I am looking for 3 stations progress, when I was working in night shift I coordinate with concrete suppliers, traffic management department and sites to apply concrete.
10- In Civil details in station: A) I was supervisor of concrete, scaffold, shuttering, carpentry work and steel work.
B) I was supervisor of subcontractor in site ( Star builders, SAVETO, CRETEC.. etc.)
C) I was supervisor of finishing work (Only block work and plastering)

civil engineer à Omar Abou Sa'ad
  • Jordanie - Aqaba
  • novembre 2014 à février 2015

Civil Site engineer in Rest village project in Aqaba (360 KM south of Amman)

I was working as site engineer and responsible of two towers in rest village with another sr. site engineer

Civil Engineer à Greater Amman Municipality
  • Jordanie - Amman
  • juin 2014 à août 2014

Working as a trainee in Special Projects Department, which is one of the important departments in GAM.

Éducation

Baccalauréat, Civil Engineering
  • à University of Jordan
  • août 2014

Grade : Good. I took several courses according to my study plan such as concrete and its lab, structure, highway & pavement, steel structure, survaying, Environmental engineer, remote sensing, numerical engineer, field techniques, engineering geology. My Graduate Research with Title “account quantities & cost project”.

Specialties & Skills

Cost Tracking
Building Commissioning
Site Engineering
civil engineer
Microsoft office
Leadership - Team Work
AutoCAD
management and coordination for small project
project management
soft skills
project control
ability to work under stress and emergency condition
cost control

Langues

Anglais
Expert
Arabe
Langue Maternelle

Adhésions

Cosolidated Contracors Company (CCC)
  • Construction copmany
  • April 2015

Formation et Diplômes

Oracle Primavera P6 Beginner and advanced levels Diploma (Formation)
Institut de formation:
professional Engineers
Date de la formation:
May 2018
Durée:
16 heures
CCC Ethics and Anti-corruption (Formation)
Institut de formation:
Consolidated Contractor Company
Date de la formation:
June 2018
Communication and Accountability (Formation)
Institut de formation:
BACS (Riyadh Metro Project)
Date de la formation:
July 2017
Durée:
10 heures
SMART Goals (Formation)
Institut de formation:
BACS (Riyadh Metro Project)
Date de la formation:
April 2017
Durée:
20 heures
Resolving Cinflict (Formation)
Institut de formation:
BACS (Riyadh Metro Project)
Date de la formation:
July 2017
Durée:
10 heures
First Aid Provider Course (Formation)
Institut de formation:
American Heart Association
Date de la formation:
May 2015
Durée:
10 heures
Basic cardiac life support provider course (Formation)
Institut de formation:
American Heart Association
Date de la formation:
May 2015
Durée:
10 heures
Health, Safety and Environment leadership training (Formation)
Institut de formation:
BACS (Riyadh Metro Project)
Date de la formation:
May 2015
Durée:
10 heures
PMP preparation course (Formation)
Institut de formation:
professional Engineers
Date de la formation:
May 2018
Durée:
35 heures
Leadership training (Formation)
Institut de formation:
BACS consurtioum (HSE Safety center)
Date de la formation:
July 2015
Durée:
30 heures
OSHA Safety Training (Certificat)
Date de la formation:
July 2016
ENclosed AREA training (Formation)
Institut de formation:
Mohammad Akawi
Date de la formation:
April 2015
Durée:
3 heures
Read Drawings (Formation)
Institut de formation:
University of Jordan - Training Center
Date de la formation:
January 2014
Durée:
15 heures
Accounting Quantities (Formation)
Institut de formation:
University of Jordan - Training Center
Date de la formation:
January 2014
Durée:
15 heures