Amir Amanulla Ihsanullah Amir Amanulla, Senior QA.QC Engineer

Amir Amanulla Ihsanullah Amir Amanulla

Senior QA.QC Engineer

Keo International Consultants - Qatar

Location
Qatar - Doha
Education
Bachelor's degree,
Experience
21 years, 3 Months

Share My Profile

Block User


Work Experience

Total years of experience :21 years, 3 Months

Senior QA.QC Engineer at Keo International Consultants - Qatar
  • Qatar - Doha
  • My current job since April 2021

Projects:
DN099-P05 - Roads & Infrastructure in Al Ebb and Leabaib.
DN004-P01 - Roads & Infrastructure in Al Kharaitiyat and Lzhgawa.

Duties and Responsibilities:

Ensure that processes needed for the Quality Management System are established, implemented and maintained.
Shall be responsible for overseeing the implantation and operation of the project quality plans at all levels. Conduct quality assurance audits on the Contractor’s operations in accordance with the Programme Management Consultant’s and Client’s requirements. Provide monthly update for quality performance and improvement on the project and an action plan for enhancement. Keep track of the quality performance KPI and alert the project management on gaps and related corrections. Conduct training for the contractor’s staff and measure the effectiveness and efficiency of the training output. Manage preparation and implementation of Quality Control supervision construction manual Requirements and implementing procedures. Coordinate with the project team on the review process of submittals and the minimum quality requirements as per project specs and international standards.
Arrange for and chair quality related meetings with Contractors, Subcontractors and Material Suppliers to define the action required for follow-up and issue the meeting minutes. Conduct internal audits of the QMS elements at least once quarterly, and provide follow up on the implementation of the required corrections and corrective actions.
Conduct external audits on Contractor and sub-contractors and suppliers on a quarterly basis and provide the proposed schedule as per QCS and project specification requirements.
Responsible for verifying the efficiency of the root cause and the corrective actions taken. Assessing and reporting on identified trends generated by audit findings and non-compliant reports and provide required workshops for improvements. Enforce initiating and sharing of lessons learned. Overlook the project handing over process.

QMS Auditor at ANAS - ASHGHAL (PWA) QSD
  • Qatar - Doha
  • April 2020 to March 2021

QMS Audit for the Ashghal (Public Works Authority) Consultants and Contractors.
Departments

Express Highway Project Department (HPD).

Local Roads Project Department (RPD).

Drainage Project Department (DPD).

Building Project Department (BPD).

Beautification Department (BUD).

Duties:

Performing QMS Audit based on QCS 2014. Preparation and submissions of Non - Conformity Reports, Preparation of QMS Checklists and Audit Reports for each Audit Activity, Review of NCR’s Proposals, Root Cause Analysis, Corrections, Corrective Actions and Preventive Actions.

Audit Skills - QMS Evaluation Parameters:
Contractors: Project Quality Plan. Quality Organization Plan. Contractor’s Quality Personnel. Staff Trainings. Inspection and Test Plans. Quality Checklist. Key Performance Indicators. Document, Data Control & Quality Records. Quality Audits. Non-Conformance Monitoring. Measuring and Test Equipment. Site Meeting & records. Project Meetings. Submittal & Shop Drawings.

Consultants: Quality Responsibilities and Duties. Quality System Documentation. Inspection and Test Plan’s (ITP). Technical Procedures, Work Instruction and Method Statements. Mentoring by Supervision Consultants. Review of Contractor Quality Documentation. Inspection responsibilities. Interfacing. Punch List (Snag List). Protection of the Works. Quality Records.

QA QC Manager at Al Huda Engineering Works
  • Qatar - Doha
  • October 2018 to March 2020

Project:
• Construction & Upgrading Fire Life Safety Installation and CCTV Security Surveillance System Installation & Commissioning for Al Wakra Hospital.

Client: Hamad Medical Corporation.

Duties and Responsibilities:

Preparation of all required Quality Documents and Procedures, Monitoring all QC related records, Preparation of all existing condition (Hospital Machineries, Equipment’s & Devices) reports and submitting to the client / end user (Al Wakra Hospital - HMC / AWH) approval before start of work, Arranging Take over inspections and Hand over inspections for each phases / zone along with Hospital Top Management, Witnessing the Authority (Qatar Civil Defense Department- QCDD) inspections and submission of Handover Documents to Consultant and End-User for Final Approval

QA QC Manager at Nakheel Co.
  • Qatar - Doha
  • December 2012 to September 2018

• Doha Port Project, Doha.
Doha Port Re-Development Project (DPP)

Client: Supreme Committee.

• Hamad Port Project, Mesaieed.
Port Access Road Project.

Client: Hamad Port Authority.

• Marina District East, South and North
Promenades Public Realm Development,

• Lusail Development Construction Package -
CP10-B5

Client: LREDC.

• New Doha International Airport Project, CP-67
Street Lighting Installation and Landscaping
Upgrade

Client: Hamad International Airport Steering
Committee.

QA.QC Manager at Watermaster Qatar
  • Qatar - Doha
  • December 2011 to November 2012

Projects:
• Medina Centrale - Pearl Qatar.
• Entry Court and Landmark - Pearl Qatar.
• Sidra Medical & Research Center.
• Intercontinental Hotel.
• Hilton Hotel.

QA.QC Incharge at Renco Qatar
  • Qatar - Doha
  • May 2010 to November 2011

Projects: Phase -1: New Doha International Airport (NDIA): Air Traffic Control and MET (ATC & MET) Meteorological Specific Equipment (CP35).
.

Scope: Design, construction, installation, testing and commissioning of all elements of ATC & MET Specific Equipment (ILS, Radars, Backbone, Communication systems, etc.). Civil and structural works such as included 17 Airfield shelters, 30 steel towers (max. height 45m), and underground duct bank-manhole system linking all the facilities spread over the NDIA site (2, 200 ha). Electrical-Mechanical works such as Control rooms, installation, testing and commissioning antennas, transformers, generators, power/ signal cabling and earthing systems, air conditioning, fire alarm & lighting systems.

Sr. QA.QC Engineer at Technip Italy
  • Saudi Arabia - Jeddah
  • June 2008 to April 2010

Projects: Yanbu National Petrochemical Company, Olefins Plant Project, Ethylene and Propylene Plant, Yanbu.

QA. QC / Testing & Commissioning Engineer at Al Shahrani for Contracting and Trading:
  • Saudi Arabia - Southern Province
  • April 2003 to June 2004

Saudi Aramco Projects:- QA.QC Engineer

1. Fiber Optic Cable Installation, Rastanura to Riyadh. K.S.A
2. Mosque Building Project in Rastanura Terminal South, K.S.A

MEP Projects:- Testing and Commissioning Engineer.

1. Project: Arabian Pipes Company Saw Pipe Mill Project, Al Jubail. Saudi Arabia.

2. Project: Saudi Arabian Mining Co, Ma’aden Wet Phosphoric Acid Plant, Ra’s Az Zawr, Kingdom of Saudi Arabia

Civil Engineer at Mowaza Construction Company
  • Maldives
  • March 2001 to March 2003

Scope: Construction of High-rise Buildings - 03 Zones - 60 rooms, new boutique in Guest area, Pizza Pavilion Extension, New Spa Sauna & Courtyard.

Civil Engineer at Larsen & Toubro - Other locations
  • India - Chennai
  • February 1999 to February 2001

Position: Civil Engineer - Feb 1999 - Feb 2001
Project: Avinash Residential Complex
Scope: Construction of High-rise Buildings - 05 Blocks with Recreation club and Swimming Pool. L&T Avinash Apartment Apartments constructed with new standards for customer centricity, architectural design, quality, and safety.

Education

Bachelor's degree,
  • at Dr. Bhimrao Ambedkar University
  • May 2008

Regular Mode

Diploma, Civil Engineering
  • at Ninans PolytechnicIsmail Technical Training Institute
  • December 1998

Specialties & Skills

Knowledge Engineering
Adherence
Training
CABLING
CUSTOMER RELATIONS
LIGHTING
MICROSOFT ACCESS
UPGRADES
ARCHITECTURAL DESIGN
MECHANICAL
MICROSOFT WORKS

Languages

English
Expert
Hindi
Expert

Training and Certifications

IRCA OHSAS – 18001:2007 (Certificate)
Date Attended:
April 2014
IRCA ISO EMS – 14001:2004 (Certificate)
Date Attended:
October 2012
IRCA ISO QMS - 9001:2008 (Certificate)
Date Attended:
August 2013
IRCA ISO QMS –9001:2015 (Certificate)
Date Attended:
March 2016