Amod Jagtap

• Delivered FEED and detailed engineering for onshore piping projects in full
compliance with ADNOC and Saudi Aramco standards, ensuring all engineering
deliverables met client and project requirements.
• Performed and independently reviewed pipeline stress analysis for both buried and
above-ground pipelines using CAESAR II, ensuring compliance with ASME B31.4 /
B31.8 and project specifications.
• Prepared and reviewed key engineering documents, including Piping valve
datasheets, Material Requisitions (MR), Technical Bid Evaluations (TBE), and
technical specifications, supporting procurement and vendor selection processes.
• Conducted Piping pipeline routing studies and Right-of-Way (ROW) assessments,
optimizing route selection based on technical, environmental, and constructability
considerations.
• Reviewed and provided technical comments on alignment sheets, crossing drawings,
and pipeline profiles, ensuring accuracy and compliance with design standards.
• Performed Piping pipeline wall thickness calculations in accordance with ASME
B31.3, B31.4 and B31.8, ensuring safe and cost-effective design.
• Identified, coordinated, and finalized battery limit interface points with multiple
contractors to ensure seamless project integration.
• Supported Procurement by preparing technical specifications and reviewing
supplier documentation.
• Provided technical support during Construction and Commissioning, including
resolving TQS/NCRs and supervising construction field installations.
• Supervised and mentored junior engineers and designers to ensure high- quality,
consistent, and timely engineering deliverables
• Provided technical input for bids, proposals, and material take-offs (MTOS) to
support project estimating and planning.

• Managed multidisciplinary coordination (Mechanical, process, civil, E&I) and client
reviews.
• Supported procurement: MTOs, BOQ, datasheets, and vendor drawings evaluations.
Managed and executed key piping engineering activities, including MTO
preparation, 3D models reviews, Material Requisitions (MR), and Technical Bid
Evaluations (TBE)
•Prepared and reviewed pipeline engineering drawings like key plans, overall plot
plans, piping plans, Facility Plot plan, Isometrics, Pipeline Alignment Sheets, Station
Approach drawings, and Typical section Pipeline / Piping Drawings
•Identified, coordinated, and finalized battery limit interface points with multiple
contractors to ensure clear alignment and smooth execution across disciplines.
•Developed pipeline layouts, Piping Plans, Facility Plot plans, Sectional Piping
Drawings, alignment sheets, and crossing drawings
•Supported site team construction, hydrotesting, pneumatic, and pre-commissioning
Site Activities
•Participated in HAZOP, HAZID Client reviews.

•Managed and executed FEED verification activities, including Material Requisitions
(MR), Technical Bid Evaluations (TBE), and 3D model reviews with client.
•Issued and reviewed technical clarifications (TQs).
•Performed detailed Pipeline Piping stress analyses in accordance with ASME B31.8
and ASME B31.3 for oil wellhead systems and associated equipment, including
pumps, vessels, and critical piping networks.
•Reviewed vendor offers for compliance with project specifications and international
standards (ASME/ASTM/API/MSS/NACE).
•Provided technical input for bids, proposals, and material take-offs (MTOs) to
support project estimating and planning.
•Validated stress analysis results to ensure system integrity, reliability, and safe
operability under design and operating conditions.
• Conducted flange load compatibility checks in compliance with API 6AF and API
6AF2 to verify connection integrity under pressure, temperature, and bending loads.
• Defined piping materials, piping classes, support standards, and technical
specifications for project implementation.
•Performed stress analysis for oil producer wells, gas lift wells, water injector wells,
and gas injector wells, ensuring safe design and operational robustness.
•Developed comprehensive Stress Critical Line Lists aligned with AGES ADNOC
requirements and project design criteria.
•Verified and approved stress reports in accordance with AGES ADNOC protocols,
ensuring accuracy, compliance, and traceability of engineering documentation.
Managed outsourced engineering activities executed by third-party consultants,
ensuring the quality, completeness, and technical compliance of their deliverables.

Utilized ASME B31.3 standards to analyze stress critical lines of tanks, PHE, pumps,
vessels, and GRE piping.
•Validated materials, P-T ratings, testing requirements, coatings/linings, and sour
service suitability.
•Performed piping flexibility analysis for both greenfield, brownfield, and demolition
projects using Caesar-II software.
•Prepared detailed stress analysis documentation by the company's established
procedures and oversaw outsourced work of contracted engineering firms.
•Reviewed stress Report evaluations performed by junior engineers.
•Managed 3D model reviews and coordinated design change evaluations with clients,
ensuring timely implementation of approved modifications.
•Led and executed a project over 10000+ Man-hours.

••Performed stress analysis based on ASME B31.3 code for various equipment,
including reciprocating compressors, column, pumps, vessels, and heat exchangers.
•Executed Piping flexibility assessments for greenfield projects with SPR tools.
•Reviewed post-order vendor documents (datasheets, BOQs, ITPs, MTCs).
•Performed support standard reviews according to project requirements
•Conducted a modal analysis of compressor lines, coordinating with the vendor
•Supported Procurement, Subcontracting, and Construction activities within project
scope by providing technical assistance.

• eveloped and implemented procedures for controlling discipline activities,
including preparation of task lists and schedules in alignment with contractual
obligations.
•Performed stress analysis utilizing ASME B31.3 code for various equipment.
including fired heaters, columns, pumps, vessels, and heat exchangers, reboilers.
•Analyzed tie-in points through LFM Review flexibility for accurate piping
•Reviewed piping support loads in accordance with pipe support standards.
•Reviewed vendor-provided nozzle allowances in compliance with specific equipment
standards and tools like Nozzle Pro, FE SIF.

Supervised a multidisciplinary team of designers and engineers, ensuring project
execution within schedule and cost constraints in accordance with relevant
standards.
•Controlled and tracked the progress of piping and layout work, including outsourced
tasks, to ensure alignment with man-hour estimates and document delivery
requirements.
•Led 15000+ Man hours project.
•Executed Stress analysis evaluation according to ASME B31.3 standards for devices
such as AHE and LPG bullet tank.
•Developed a stress critical line list for the project according to Project Specifications.
•Conducted comprehensive evaluations to troubleshoot and optimize piping systems
in terms of design, operation, and maintenance
•Executed stress analysis review for technical support at the site, ensuring prompt
support selection. Facilitated seamless coordination among mechanical, civil, and
process inter-disciplines.
•Reviewed and validated the work of other engineers in terms of stress and flexibility
analysis for uniformity on a single platform.
•Conducted Piping Stress Analysis for FIV, Flare, Steam, Two-phase flow. PSV and
Rack lines
•Performed Flange Leakage calculation, Temperature calculations for column skirt,
Dummy/Trunnion calculations, Slug Force calculations
•Executed assessments of nozzles with Nozzle Pro, WRC-107, and WRC-297
methodologies.

Performed static stress analysis adhering to ASME B31.3 for pump, column, reactor,
heat exchanger, tank, AFC units, and fire heater.
•Conducted dynamic modal analysis of two-phase, FIV, and AIV lines
•Developed piping stress specifications and identified critical lines.
•Oversaw outsourced operations of third-party engineering firms
•Generated detailed isometric drawings from Piping GAD and tabulated MTO of
Piping Components based on existing isometrics.
•Prepared data sheets for Spring Supports, PTFE Pads, and special support sketches.
Indexed civil loading markups on civil/structural drawings.
•Enhanced routing optimization by evaluating piping layout for support feasibility in
the 3D model
•Supported technical discussions with vendors as needed

•Performed stress analysis in adherence with ASME B31.3 code for equipment such as
pumps, reactors, and heat exchangers.
•Executed dynamic analysis on two-phase lines.
•Responsible for coordinating with external clients and conducting stress analysis.
•Scheduled project targets, maintaining output databases of C2 complex
•Coordinated effectively with external B/L, interface vendor
•Validated IFC Isometrics per stress requirement
•Prepared Stress Critical Line List
•Prepared Valve Data Sheets.