Senior Civil & Structural Engineer
China petroleum engineering
Total years of experience :14 years, 9 Months
Structural Designing of Oil and Gas Projects
Company: Foster Wheeler Ltd
Chennai- India
(HQ: UK Based Company)
Period: September 2005 to 2007 (Around 2 Years)
Designation: Design Engineer (Structural)
Department: Oil and Gas
Process Plant Department
Project -1
• Project: Methylne methcryle Plant
• Client: Lucite International, Singapore
Project -2
• Project: LNG Plant, Karratha
• Client: Wood Side Energy, Australia
Present Role: • Preparing of "Design Basis - Civil & Structural".
• Preparing of "Standard Drawings - Civil & Structural".
• Developing the "In-house-Spread Sheets" for design calculations as per relevant Codes & Standards.
• Review of FEED documents.
• Attending the Client Weekly meetings.
• Analysis and Design of Steel & Concrete Structures.
• Review of 3D Model & Checking of Drawings.
• Co-Ordination with other departments like Electrical, Mechanical, Piping, Instrumentation.
Codes & Standards: Singapore Codes, British Codes, Australian Codes
➢ Oil & Gas - Onshore Plants
Petrochemical Plants
Process structures, Pipe racks, Equipment foundations & Pile foundations
Refinery Plant s
Technological structures, Pipe racks, Equipment foundations & Compressor sheds.
Utility Area of Plant
Substation (Blast) buildings
Control room building
➢ Oil & Gas - Offshore Plants
Subsea Projects
Manifold structures
X-mass tree satellite protection structure
Cement Plants
Pre-heater building, Cement mill building & Raw mill building
Specialized Experience
* Designing of Modular Pipe Racks
* Designing of Subsea structures
* Designing of Blast buildings
* Connection Design by British codes
Software skills
* STAAD pro V8i
* SAP 2000
* AutoCAD
* Interface - PDMS & PDS
* Interface - Solid works
Special Assignments
* Deputed to "Malaysia" for Aker solutions Malayasia, Port Klang, Malaysia for SIT ( Structural Integration test) -Structural test & FAT (Factory acceptance test) -Structural for KG-D6 & MA-D6 Subsea project - as Design-Installation Structural Engineer.
Skills Developed
* Knowledge in STAAD Pro, STAAD Foundation, OPEN STAAD), Mat 3D, Foundation 3D, Smart Plant Review, (SPR) . Navis, Frameworks, and Microstation
* Experience in Working with BS, American & Indian codes.
* Prepared various design templates using Ms Excel,
* Design of different steel structures for oil & gas projects including transportation & lifting
* Have designed various substations & RC buildings for BLAST & NON BLAST conditions
Worked with major MNC companies as
• F.L.Smidth (1 year) - India
• Mott Mac Donald (1 years) - India
• Foster Wheeler (2 years) - India
• Aker Solutions (3 years) - India
• CCC S.A.L (3 years) - UAE
Total experience in
• Onshore Plants - 9 years
• Offshore Plants- 1 years
International experience in
• Aker Solutions, Malayasia
• CCC S.A.L, UAE
Worked with Major Clients,
• ADCO, UAE
• Petroleum Development Oman-PDO
• Lucite International
• Wood Side Energy
• Reliance Energy
• Repsol Energy
• Exxon Mobil Highlands
• ADCO
Codes & Standards,
• American Codes
• British Codes
• Australian / Newzealand Codes
• Singapore Codes
• Norwegian Codes
• DNV Codes
Career Summary: - (Present to old company)
Company: Consolidated Contractors Company Engineering & Procurement S.A.L,
Abu Dhabi - U.A.E
(HQ: Greece Based Company)
Period: September 2010 to Till Date
Company: F.L.Smidth (Bagawati Designs)
Mumbai- India
(HQ: Holland Based Company)
Period: September 2004 to 2004 (6months)
Designation: Junior Design Engineer (Structural)
Department: Cement Plant
Pyro Section Department
Project -1
• Project: Vasvadatta Cement
• Client: Holtec Cement,
Present Role: • Analysis and Design of Steel & Concrete Structures.
• Review of 3D Model & Checking of Drawings.
• Co-Ordination with other departments like Electrical, Mechanical, Piping, Instrumentation.
Codes & Standards: Indian Codes, British Codes
Passport No.: F8628379
Date of Issue: January 2007
Date of Expiry: January 2015
Email: • amolsbhamre@gmail.com
• amol_bhamre@yahoo.com
Contact Telephone: • +971 55 864 8520 (Dubai-UAE)
• +971 55 146 1550 (Dubai-UAE)
➢ Oil & Gas - Onshore Plants
Petrochemical Plants
Process structures, Pipe racks, Equipment foundations & Pile foundations
Refinery Plant s
Technological structures, Pipe racks, Equipment foundations & Compressor sheds.
Utility Area of Plant
Substation (Blast) buildings
Control room building
➢ Oil & Gas - Offshore Plants
Subsea Projects
Manifold structures
X-mass tree satellite protection structure
Cement Plants
Pre-heater building, Cement mill building & Raw mill building
Specialized Experience
* Designing of Modular Pipe Racks
* Designing of Subsea structures
* Designing of Blast buildings
* Connection Design by British codes
Software skills
* STAAD pro V8i
* SAP 2000
* AutoCAD
* Interface - PDMS & PDS
* Interface - Solid works
Special Assignments
* Deputed to "Malaysia" for Aker solutions Malayasia, Port Klang, Malaysia for SIT ( Structural Integration test) -Structural test & FAT (Factory acceptance test) -Structural for KG-D6 & MA-D6 Subsea project - as Design-Installation Structural Engineer.
Skills Developed
* Knowledge in STAAD Pro, STAAD Foundation, OPEN STAAD), Mat 3D, Foundation 3D, Smart Plant Review, (SPR) . Navis, Frameworks, and Microstation
* Experience in Working with BS, American & Indian codes.
* Prepared various design templates using Ms Excel,
* Design of different steel structures for oil & gas projects including transportation & lifting
* Have designed various substations & RC buildings for BLAST & NON BLAST conditions
Worked with major MNC companies as
• F.L.Smidth (1 year) - India
• Mott Mac Donald (1 years) - India
• Foster Wheeler (2 years) - India
➢ Oil & Gas - Onshore Plants
Petrochemical Plants
Process structures, Pipe racks, Equipment foundations & Pile foundations
Refinery Plant s
Technological structures, Pipe racks, Equipment foundations & Compressor sheds.
Utility Area of Plant
Substation (Blast) buildings
Control room building
➢ Oil & Gas - Offshore Plants
Subsea Projects
Manifold structures
X-mass tree satellite protection structure
Cement Plants
Pre-heater building, Cement mill building & Raw mill building
Specialized Experience
* Designing of Modular Pipe Racks
* Designing of Subsea structures
* Designing of Blast buildings
* Connection Design by British codes
Software skills
* STAAD pro V8i
* SAP 2000
* AutoCAD
* Interface - PDMS & PDS
* Interface - Solid works
Special Assignments
* Deputed to "Malaysia" for Aker solutions Malayasia, Port Klang, Malaysia for SIT ( Structural Integration test) -Structural test & FAT (Factory acceptance test) -Structural for KG-D6 & MA-D6 Subsea project - as Design-Installation Structural Engineer.
Skills Developed
* Knowledge in STAAD Pro, STAAD Foundation, OPEN STAAD), Mat 3D, Foundation 3D, Smart Plant Review, (SPR) . Navis, Frameworks, and Microstation
* Experience in Working with BS, American & Indian codes.
* Prepared various design templates using Ms Excel,
* Design of different steel structures for oil & gas projects including transportation & lifting
* Have designed various substations & RC buildings for BLAST & NON BLAST conditions
Worked with major MNC companies as
• F.L.Smidth (1 year) - India
• Mott Mac Donald (1 years) - India
• Foster Wheeler (2 years) - India
• Aker Solutions (3 years) - India
• CCC S.A.L (3 years) - UAE
Total experience in
• Onshore Plants - 9 years
• Offshore Plants- 1 years
International experience in
• Aker Solutions, Malayasia
• CCC S.A.L, UAE
Worked with Major Clients,
• ADCO, UAE
• Petroleum Development Oman-PDO
• Lucite International
• Wood Side Energy
• Reliance Energy
• Repsol Energy
• Exxon Mobil Highlands
• ADCO
Codes & Standards,
• American Codes
• British Codes
• Australian / Newzealand Codes
• Singapore Codes
• Norwegian Codes
• DNV Codes
Career Summary: - (Present to old company)
➢ Oil & Gas - Onshore Plants
Petrochemical Plants
Process structures, Pipe racks, Equipment foundations & Pile foundations
Refinery Plant s
Technological structures, Pipe racks, Equipment foundations & Compressor sheds.
Utility Area of Plant
Substation (Blast) buildings
Control room building
➢ Oil & Gas - Offshore Plants
Subsea Projects
Manifold structures
X-mass tree satellite protection structure
Cement Plants
Pre-heater building, Cement mill building & Raw mill building
Specialized Experience
* Designing of Modular Pipe Racks
* Designing of Subsea structures
* Designing of Blast buildings
* Connection Design by British codes
Software skills
* STAAD pro V8i
* SAP 2000
* AutoCAD
* Interface - PDMS & PDS
* Interface - Solid works
Special Assignments
* Deputed to "Malaysia" for Aker solutions Malayasia, Port Klang, Malaysia for SIT ( Structural Integration test) -Structural test & FAT (Factory acceptance test) -Structural for KG-D6 & MA-D6 Subsea project - as Design-Installation Structural Engineer.
Skills Developed
* Knowledge in STAAD Pro, STAAD Foundation, OPEN STAAD), Mat 3D, Foundation 3D, Smart Plant Review, (SPR) . Navis, Frameworks, and Microstation
* Experience in Working with BS, American & Indian codes.
* Prepared various design templates using Ms Excel,
* Design of different steel structures for oil & gas projects including transportation & lifting
* Have designed various substations & RC buildings for BLAST & NON BLAST conditions
Worked with major MNC companies as
• F.L.Smidth (1 year) - India
• Mott Mac Donald (1 years) - India
• Foster Wheeler (2 years) - India
• Aker Solutions (3 years) - India
• CCC S.A.L (3 years) - UAE
Total experience in
• Onshore Plants - 9 years
• Offshore Plants- 1 years
International experience in
• Aker Solutions, Malayasia
• CCC S.A.L, UAE
Worked with Major Clients,
• ADCO, UAE
• Petroleum Development Oman-PDO
• Lucite International
• Wood Side Energy
• Reliance Energy
• Repsol Energy
• Exxon Mobil Highlands
• ADCO
Codes & Standards,
• American Codes
• British Codes
• Australian / Newzealand Codes
• Singapore Codes
• Norwegian Codes
• DNV Codes
Career Summary: - (Present to old company)
Company: Consolidated Contractors Company Engineering & Procurement S.A.L,
Abu Dhabi - U.A.E
(HQ: Greece Based Company)
Period: September 2010 to Till Date
Designation: Senior Design Engineer (Structural)
Department: CED
❖ ADMA-OPCO +100MBD DAS FACILITIES UPGRADE, Oil & gas (Brownfield) project located at Das Island, Abu Dhabi, UAE
• Structural analysis, design & Detail Steel & RCC drawings for Pipe rack, special pipe supports, operating platforms, cable bridge vessel foundation, pump foundation, tank foundation, Vessel pits, trenches, equipment foundations, skid foundations Using British & American codes.
• Also includes site specific design, Model review and clash checking for 3D model.
• Site queries, Technical queries and Site visit to Das island
❖ Project: Expansion of BAB Gas Compression (EBGCP), Abu Dhabi
Main EPC contractor: Petrofac, UAE
Client: ADCO, UAE
Present Role: • Preparing of "Design Basis - Civil & Structural".
• Preparing of "Standard Drawings - Civil & Structural".
• Developing the "In-house-Spread Sheets" for design calculations as per relevant Codes & Standards.
• Review of FEED documents.
• Attending the Client Weekly meetings.
• Analysis and Design of Steel & Concrete Structures.
• Co-Ordination with other departments like Electrical, Mechanical, Piping, Instrumentation.
Codes & Standards: British and American Codes
❖ Project: - PNG LNG, Papua New Guinea
Main EPC contractor: CJJV, Japan
Client: Exxon Mobil Highlands, Australia
Present Role: • Preparing of "Design Basis - Civil & Structural".
• Preparing of "Standard Drawings - Civil & Structural".
• Developing the "In-house-Spread Sheets" for design calculations as per relevant Codes & Standards.
• Review of FEED documents.
• Attending the Client Weekly meetings.
• Analysis and Design of Steel & Concrete Structures.
• Review of 3D Model & Checking of Drawings.
• Co-Ordination with other departments like Electrical, Mechanical, Piping, Instrumentation.
Codes & Standards: Australian Codes, New Zealand Codes & Chiyoda Standards.
➢ Oil & Gas - Onshore Plants
Petrochemical Plants
Process structures, Pipe racks, Equipment foundations & Pile foundations
Refinery Plant s
Technological structures, Pipe racks, Equipment foundations & Compressor sheds.
Utility Area of Plant
Substation (Blast) buildings
Control room building
➢ Oil & Gas - Offshore Plants
Subsea Projects
Manifold structures
X-mass tree satellite protection structure
Cement Plants
Pre-heater building, Cement mill building & Raw mill building
Specialized Experience
* Designing of Modular Pipe Racks
* Designing of Subsea structures
* Designing of Blast buildings
* Connection Design by British codes
Software skills
* STAAD pro V8i
* SAP 2000
* AutoCAD
* Interface - PDMS & PDS
* Interface - Solid works
Special Assignments
* Deputed to "Malaysia" for Aker solutions Malayasia, Port Klang, Malaysia for SIT ( Structural Integration test) -Structural test & FAT (Factory acceptance test) -Structural for KG-D6 & MA-D6 Subsea project - as Design-Installation Structural Engineer.
Skills Developed
* Knowledge in STAAD Pro, STAAD Foundation, OPEN STAAD), Mat 3D, Foundation 3D, Smart Plant Review, (SPR) . Navis, Frameworks, and Microstation
* Experience in Working with BS, American & Indian codes.
* Prepared various design templates using Ms Excel,
* Design of different steel structures for oil & gas projects including transportation & lifting
* Have designed various substations & RC buildings for BLAST & NON BLAST conditions
Worked with major MNC companies as
• F.L.Smidth (1 year) - India
• Mott Mac Donald (1 years) - India
• Foster Wheeler (2 years) - India
• Aker Solutions (3 years) - India
• CCC S.A.L (3 years) - UAE
Total experience in
• Onshore Plants - 9 years
• Offshore Plants- 1 years
International experience in
• Aker Solutions, Malayasia
• CCC S.A.L, UAE
Worked with Major Clients,
• ADCO, UAE
• Petroleum Development Oman-PDO
• Lucite International
• Wood Side Energy
• Reliance Energy
• Repsol Energy
• Exxon Mobil Highlands
• ADCO
Codes & Standards,
• American Codes
• British Codes
• Australian / Newzealand Codes
• Singapore Codes
• Norwegian Codes
• DNV Codes
Career Summary: - (Present to old company)
Company: Consolidated Contractors Company Engineering & Procurement S.A.L,
Abu Dhabi - U.A.E
(HQ: Greece Based Company)
Period: September 2010 to Till Date
Designation: Senior Design Engineer (Structural)
Department: CED
❖ ADMA-OPCO +100MBD DAS FACILITIES UPGRADE, Oil & gas (Brownfield) project located at Das Island, Abu Dhabi, UAE
• Structural analysis, design & Detail Steel & RCC drawings for Pipe rack, special pipe supports, operating platforms, cable bridge vessel foundation, pump foundation, tank foundation, Vessel pits, trenches, equipment foundations, skid foundations Using British & American codes.
• Also includes site specific design, Model review and clash checking for 3D model.
• Site queries, Technical queries and Site visit to Das island
❖ Project: Expansion of BAB Gas Compression (EBGCP), Abu Dhabi
Main EPC contractor: Petrofac, UAE
Client: ADCO, UAE
Present Role: • Preparing of "Design Basis - Civil & Structural".
• Preparing of "Standard Drawings - Civil & Structural".
• Developing the "In-house-Spread Sheets" for design calculations as per relevant Codes & Standards.
• Review of FEED documents.
• Attending the Client Weekly meetings.
• Analysis and Design of Steel & Concrete Structures.
• Co-Ordination with other departments like Electrical, Mechanical, Piping, Instrumentation.
Codes & Standards: British and American Codes
❖ Project: - PNG LNG, Papua New Guinea
Main EPC contractor: CJJV, Japan
Client: Exxon Mobil Highlands, Australia
Present Role: • Preparing of "Design Basis - Civil & Structural".
• Preparing of "Standard Drawings - Civil & Structural".
• Developing the "In-house-Spread Sheets" for design calculations as per relevant Codes & Standards.
• Review of FEED documents.
• Attending the Client Weekly meetings.
• Analysis and Design of Steel & Concrete Structures.
• Review of 3D Model & Checking of Drawings.
• Co-Ordination with other departments like Electrical, Mechanical, Piping, Instrumentation.
Codes & Standards: Australian Codes, New Zealand Codes & Chiyoda Standards.
Company: Aker Solutions (Aker Kvanvener)
Mumbai - India
(HQ: Norway Based Company)
Period: September 2007 to September 2010 (3 Years)
Designation: Senior Engineer (Structural)
Department: Oil and Gas
Offshore - Subsea - Ties & Manifolds
Project -1
• Project: KGD6& MA D6 Field Development.
• Installation Contractor: Technip, France
• Client: Reliance Petroleum, India
Project -2
• Project: X-mass Tree Satellite Protection
System
• Client: Repsol Energy, Spain
Present Role: • Analysis & Design of Subsea Structures.
Like Manifolds & X-Mass Protection system.
• Review of 3D Model in "Solid Works" Software.
• Preparation of Reports: 1. In place Analysis report.
2. Installation Analysis report.
3. Transportation Analysis report.
4. Joint Design report.
5. SIT -Structural Integration Test report.
6. Weight Control Report.
7. Material Specification Report.
• Review of "Suction anchor" design report.
• Review of "Padeye" in Ansys report
• Co-Ordination with other departments
• Attending the "SIT - Fabrication Yard".
Codes & Standards: Norway Codes, DNV Codes, API Codes
Onsite Deputation: Deputed to Aker Solutions - Fabrication Yard
In Port Klang - Malayasia.For SIT - Structural Integration Test - Before Transportation it to Deep Sea By Barge.
Designation: Senior Design Engineer (Structural)
Department: CED
❖ ADMA-OPCO +100MBD DAS FACILITIES UPGRADE, Oil & gas (Brownfield) project located at Das Island, Abu Dhabi, UAE
• Structural analysis, design & Detail Steel & RCC drawings for Pipe rack, special pipe supports, operating platforms, cable bridge vessel foundation, pump foundation, tank foundation, Vessel pits, trenches, equipment foundations, skid foundations Using British & American codes.
• Also includes site specific design, Model review and clash checking for 3D model.
• Site queries, Technical queries and Site visit to Das island
❖ Project: Expansion of BAB Gas Compression (EBGCP), Abu Dhabi
Main EPC contractor: Petrofac, UAE
Client: ADCO, UAE
Present Role: • Preparing of "Design Basis - Civil & Structural".
• Preparing of "Standard Drawings - Civil & Structural".
• Developing the "In-house-Spread Sheets" for design calculations as per relevant Codes & Standards.
• Review of FEED documents.
• Attending the Client Weekly meetings.
• Analysis and Design of Steel & Concrete Structures.
• Co-Ordination with other departments like Electrical, Mechanical, Piping, Instrumentation.
Codes & Standards: British and American Codes
❖ Project: - PNG LNG, Papua New Guinea
Main EPC contractor: CJJV, Japan
Client: Exxon Mobil Highlands, Australia
Present Role: • Preparing of "Design Basis - Civil & Structural".
• Preparing of "Standard Drawings - Civil & Structural".
• Developing the "In-house-Spread Sheets" for design calculations as per relevant Codes & Standards.
• Review of FEED documents.
• Attending the Client Weekly meetings.
• Analysis and Design of Steel & Concrete Structures.
• Review of 3D Model & Checking of Drawings.
• Co-Ordination with other departments like Electrical, Mechanical, Piping, Instrumentation.
Codes & Standards: Australian Codes, New Zealand Codes & Chiyoda Standards.
Company: Aker Solutions (Aker Kvanvener)
Mumbai - India
(HQ: Norway Based Company)
Period: September 2007 to September 2010 (3 Years)
Designation: Senior Engineer (Structural)
Department: Oil and Gas
Offshore - Subsea - Ties & Manifolds
Project -1
• Project: KGD6& MA D6 Field Development.
• Installation Contractor: Technip, France
• Client: Reliance Petroleum, India
Project -2
• Project: X-mass Tree Satellite Protection
System
• Client: Repsol Energy, Spain
Present Role: • Analysis & Design of Subsea Structures.
Like Manifolds & X-Mass Protection system.
• Review of 3D Model in "Solid Works" Software.
• Preparation of Reports: 1. In place Analysis report.
2. Installation Analysis report.
3. Transportation Analysis report.
4. Joint Design report.
5. SIT -Structural Integration Test report.
6. Weight Control Report.
7. Material Specification Report.
• Review of "Suction anchor" design report.
• Review of "Padeye" in Ansys report
• Co-Ordination with other departments
• Attending the "SIT - Fabrication Yard".
Codes & Standards: Norway Codes, DNV Codes, API Codes
Onsite Deputation: Deputed to Aker Solutions - Fabrication Yard
In Port Klang - Malayasia.For SIT - Structural Integration Test - Before Transportation it to Deep Sea By Barge.
Company: Foster Wheeler Ltd
Chennai- India
(HQ: UK Based Company)
Period: September 2005 to 2007 (Around 2 Years)
Designation: Design Engineer (Structural)
Department: Oil and Gas
Process Plant Department
Project -1
• Project: Methylne methcryle Plant
• Client: Lucite International, Singapore
Project -2
• Project: LNG Plant, Karratha
• Client: Wood Side Energy, Australia
Present Role: • Preparing of "Design Basis - Civil & Structural".
• Preparing of "Standard Drawings - Civil & Structural".
• Developing the "In-house-Spread Sheets" for design calculations as per relevant Codes & Standards.
• Review of FEED documents.
• Attending the Client Weekly meetings.
• Analysis and Design of Steel & Concrete Structures.
• Review of 3D Model & Checking of Drawings.
• Co-Ordination with other departments like Electrical, Mechanical, Piping, Instrumentation.
Codes & Standards: Singapore Codes, British Codes, Australian Codes
Company: Mott MacDonald
Mumbai- India
(HQ: UK Based Company)
Period: September 2004 to 2005 (6 Months)
Designation: Junior Design Engineer (Structural)
Department: Oil and Gas
Petroleum Department
Project -1
• Project: Onshore plant
• Client: PDO, Oman
Project -2
• Project: Tout field development
• Client: Chine Petroleum, Algeria
Present Role: • Preparing of "Design Basis - Civil & Structural".
• Preparing of "Standard Drawings - Civil & Structural".
• Developing the "In-house-Spread Sheets" for design calculations as per relevant Codes & Standards.
• Review of FEED documents.
• Attending the Client Weekly meetings.
• Analysis and Design of Steel & Concrete Structures.
• Review of 3D Model & Checking of Drawings.
• Co-Ordination with other departments like Electrical, Mechanical, Piping, Instrumentation.
Codes & Standards: American Codes, British Codes, PDO Standards.
B E Civil, 2004, B.V.C.O.E, Pune University, India
D.C.E Civil, 2001, M.S.B.T.E, Mumbai, India Total Years of Experience 10 years +