Arshad Koya

• Conducting planning, scheduling, project engineering and detail engineering.
• Assist procurement personnel in procuring equipment, materials and services.
• Issued request for tenders and requisitions, negotiated with third-party vendors and subcontractors for price estimation and project schedule
• Attended in client meetings, prepared scope of work, proposed creative solutions to resolve conflicts and best serve clients' needs
• Coordinate with various departments such as Purchase, QA/QC, Site Engineers, etc
• Preparation of Project Method Statement, Risk Assessment, Work schedule etc.
• Participate in Project Kick-off Meeting, Project Presentation Meeting, Project Review Meetings etc and preparation of Minutes of Meeting.
• Preapation of BOQ and planning for the site deliveries.
• Preparation of material submittal, schematic and GAD drawings for client approvals
• Co-ordinate for site inspection for the installation works with the client and the consultant.
• Ensure all deliverables are technically in accordance with client requirements
• Preperation of P&ID diagrams and GAD for the client’s approval
• Preparation of Piping arrangement (Double wall steel piping) with equipments, design and layout diagram for the client’s approval
• Monitor program cost activity to achieve within the budget.
• Assist Project Manager with Planning and resource allocation to meet goals and objectives.
• Follow the company safety guidelines throughout the project execution period.
• Participated in HSE and Quality Management Certification for the company

• Coordinate with various department such as Purchase department, QA/QC dept, Design and Engg dept, , Contractor, Planning Engg dept, Site Engineers etc
• Review GA Drawings, & P&I Drawings related to the Project for proper monitoring and Inspection.
• Participating in the preparation of Project Method Statement.
• Participate in Project Kick-off Meeting, Project Presentation Meeting, Project Review Meetings etc and preparation of Minutes of Meeting.
• Schedule and monitor program activity to achieve an on-time result.
• Monitor program cost activity to achieve an in budget result.
• Assist Project Manager with Planning and resource allocation to meet goals and objectives.
• Prepare Bill of Material, detailed instruction prior to the commencement of site installation.
• Resolve any discrepancy in the drawings.( if find coordinate with Design and engg dept)
• Assist in Hydro and pneumatic testing procedure preparation with QA department.
• Witnessing pressure testing with client representatives.
• Preparation of Progress Reports Daily, Weekly & Monthly
• Ensure that project charges are correctly highlighted for closing process.
• Follow the company safety guidelines throughout the project execution period.
• To make sure the payment done by the client for each completed jobs.
CLIENTS: ADNOC, ENOC, EMARAT AND MEP CONTRACTORS

• • Coordinate with various department such as Purchase department, QA/QC dept, Design and Engg dept, , Contractor, Planning Engg dept, Site Engineers etc
• Review GA Drawings, Isometric Drawings & P& I Drawings related to the Project for proper monitoring and Inspection.
• Participating in the preparation of Project Method Statement.
• Participate in Project Kick-off Meeting, Project Presentation Meeting, Project Review Meetings etc and preparation of Minutes of Meeting.
• Schedule and monitor program activity to achieve an on-time result.
• Monitor program cost activity to achieve an in budget result.
• Assist Project Manager with Planning and resource allocation to meet goals and objectives.
• Review of Bill of Material, detailed instruction prior to the commencement of Fabrication.
• Material Quantity takes off from the drawings and also Material Identification with respect to the test Certificates.
• Resolve any discrepancy in the drawings.( if find coordinate with Design and engg dept)
• Assist in Hydro and pneumatic testing procedure preparation with QA department.
• Witnessing pressure testing with the TPI and also with client representatives.
• Raising Site Technical Queries (STQ) and Site Engineering Instructions (SEI) and coordinating with TPI.
• Preparation of Progress Reports Daily, Weekly & Monthly
• Ensure that project charges are correctly highlighted for closing process.
• Follow the company safety guidelines throughout the project execution period.
• To make sure the payment done by the client for each completed jobs.
PROJECTS HANDLED:
• Replacement of Sulphuric acid CS pipeline to SS for Hidd Power Company
• Refurbishment of Bath Heater for Hidd Power Company
• Pickilng & Passivation of Elbows for Bassi Luigi for Reliance India Project
• Fabrication & Supply of Tapered Brass plugs for Sitra Power Station for Heat Exchanger
• Refurbishment of Turbine inlet expansion joint for Sitra power Station
• Laser Alignment for the Rotary Equipments for Sulb Steels, etc..

• To identify and target potential clients in GCC.
• To contact, visit and meet potential clients in order to market company’s products and services.
• To carry out introductory meetings and Technical presentations to clients.
• To assess clients, with the initial technical/commercial support, according to inquiry requirements.
• To maintain and fill all Sales & Project related documents
• To present the incoming inquiries and tenders, in daily basis for GM’s and department heads approval.
• To co-ordinate with estimation, Project & design departments for the entire projects
• Negotiating with customers for the submitted offers
• To have regular communication with the clients to ensure continuous feedback about the status of submitted offers (won, lost or pending).
• To have regular meetings with responsible persons to ensure that quotation are submitted in time, and the submitted offer does reflect perfectly the client requirements.
• To identify new potential clients, and process all the necessary pre-qualify requirements, to keep the company as an approved vendor.
• Ensure quotation file is updated and properly filed
• Resolve any discrepancy in the drawings.( if find coordinate with Design and engg dept)
• To participate in Project Kick-off Meeting, Project Presentation Meeting, Project Review Meetings etc and preparation of Minutes of Meeting (Hamriyah Power Station, DUBAL, DEWA JEBEL ALI POWER AND DESALINATION PLANT, SEWA, FEWA, ADNOC, CMS POWER COMPANY, SEC, OMIFCO, ALBA, ETC..).
• To upkeep of sales brochure.
• To make sure the payment done by the client for each completed jobs.
PROJECTS HANDLED:
• Hamriya Power Station Expansion Phase 2 - Supply & Commissioning of sea water intake equipments such as Stop Logs, Drum Screens & Debris Filter
• Supply & Commissioning of 4 nos Debris Filter for DUBAL

 To operate plant at optimum conditions and achieve production targets.
 Responsible for make the components sketch by using Autocad
 To get maximum yield at various stages and to minimize the consumption of raw material.
 Proper and efficient utilization of the manpower.
 To perform and participate in the preventive, corrective and troubleshooting mechanical maintenance activities of the plant equipment, Compressors and Pumps.
 To identify spare parts required for maintenance work, from manufacturers’ drawings and spare parts lists.
 Develop manufacturing procedures and monitor the manufacture of their designs in a factory to improve operations and product quality.
 Responsible for implementing operating procedures, resolving system malfunctions, and providing technical information
 To comply with all company Health, Safety and Environment
 Responsible for supervising operation and routing and scheduling the work.
 To ensure recording of production data, analyze quality of products and other shift records.
 Responsible for all shift activities including quality control, maintenance and training of shift field officers
 To perform shutdown maintenance repair and overhaul on all rotating and static equipment, including Furnace, Compressors & Pumps.
 Attending daily & weekly progress meeting with clients and
 Controlling the work and material flow in the industry.

 Resposibilities in tool room machining process and operation of Lathe, CNC- Milling, Grinding, EDM Wire Cutting, Sparking, Welding machine etc.
 Responsibilities of assisting in the development of new Profile tools, Progressive and Blanking dies and scheduling the work for new tools & Molds
 Studying Tool drawings and part drawings to determine dimensions and tolerances of finished work piece and determine optimal sequence of operations.
 Participating in trials conducted for new tools, Molds, identifying the problems and coordinating the correction activities
 Participating in Design review meeting with engineers at design stage and design validating stage to support in fixing practical issues
 Responsibility to co ordinate with Quality Assurance Department
 Assisting to maintaining tool raw material stores