VIBRICATION ENGINEERING
NATIONA INT. INDEPENDENT GAS TURBINE
Total years of experience :16 years, 5 Months
RESPSONSIBILITIES
- Used vibration fault diagnose to detect the fault in Turboprop Engine T-56
- The engine plethora part modules consist of many components which can easily result into mechanical failure cause by fault of just one or two components. Hence, we used diagnose powerful equipment to detect the type of vibration in the turbine to know the faulty component and thus corrected.
- We used this method and studied the behavior of the Turboprop Turbine vibration condition, highlight the merit of combing this vibration information with the information already gotten from the Technical Log of the equipment maintenance routine manual. And finally give Engineering judgment of the Turbine.
- We also used primary fault diagnose of a complex system which involved the detection of fault of a component through the failure of a particular part which aids the rotation of the other component, when such component suddenly stop, other components may equally stop automatically.
RESPSONSIBILITIES
- Used vibration fault diagnose to detect the fault in Turboprop Engine T-56
- The engine plethora part modules consist of many components which can easily result into mechanical failure cause by fault of just one or two components. Hence, we used diagnose powerful equipment to detect the type of vibration in the turbine to know the faulty component and thus corrected.
- We used this method and studied the behavior of the Turboprop Turbine vibration condition, highlight the merit of combing this vibration information with the information already gotten from the Technical Log of the equipment maintenance routine manual. And finally give Engineering judgment of the Turbine.
- We also used primary fault diagnose of a complex system which involved the detection of fault of a component through the failure of a particular part which aids the rotation of the other component, when such component suddenly stop, other components may equally stop automatically.
Lube Maintenance services on generators, general power solution / Load balancing
Maintenance on welding machines
Maintenance on rectifier/battery system
Trouble shooting / rectification of fault on site generating plant and welding machines and filling machines
Instrumentation and controls maintenance
Routine maintenance on electrical machine
Pipe line designed
Prepares maintenance plan and instruction for the equipment based on OEM recommendation and ensures that it is implemented.
Evaluate the condition of equipment based on its operational data and implement corrective action if necessary.
Implement plant SOP as advised by OEM and site manager.
Ensure gas engine oil analysis is conducted at regular interval and lubrication service conducted if require.
Installed plants based on their operational standard.
Monitor the performance of the plant equipment and machinery through the SCADA system and take corrective /preventive action as required.
Prepares and implements change over in gas generating Turbines Generates daily and monthly plants reporting as required by the superintendent.
Developed subordinate personnel with on the job training and maintains efficient and harmonious employee relationship on assigned task.
SERVICES RIVER CROSSING OF PIPE LINE ALONG SECOND LARGEST RIVER CROSSING IN THE WORLD WESTERN CALABAR/ORON PIPE LINE CONSTRUCTION USING LAND RIG DRILLING
Responsibilities
• Develop and design electrical control systems for oil and gas drilling equipment.
• Produce required documents, drawings/schematics, and procedures related to the electrical systems.
• Write routine reports and correspondence.
• Create electrical drawing packages using software or current technology.
• Install electrical equipment onsite.
• Maintain and make repairs to electrical equipment onsite.
• Conduct daily inspections on all systems and report any potential issues.
• Ensure that all required records are maintained.
• Troubleshoot all electrical systems and make recommendations for upgrades, repairs, maintenance, etc.
• Calibrate and modify systems according to site needs.
• Provide electrical technical support to all areas of the rig or site.
• Maintain an adequate supply of parts for emergency repairs.
• Assist the maintenance supervisor or chief engineer with preparing the maintenance and repair budget for the electrical systems.
• Supervise other electricians.
• Ensure that all regulatory requirements are met.
Troubleshoot and rectify electrical and mechanical fault in welding machines, electrical motors and generating set.
General Electrical Maintenance
Maintenance of land Rig used for drilling pipe underground river crossing
Carry out Routine and periodic maintenance in electrical appliances
Generates daily service report.
Carry out load assessment and balancing
Conducts insulation resistance testing on alternators.
Calibrates Cummins type generator rollers using service tools
ELECTRICAL ENGINEERING SUPERVISOR 2014-2016 EXXONMOBIL EKET AKWA IBOM STATE NIGERIA
RESPONSIBILITIES
-Developed and execute a centralized engineering action units and provides new upstream capital projects to maintain safety, availability and reliability of electrical system.
- Developed work to execute electrical surveillance programs.
- Work to collect data with the used of computer maintenance management system and also used other available data source.
- Used data collected to analyze maintenance records to determined electrical failure rates that is available, made reliability calculations to identified the failure modes.
- We examined electrical equipment test records and results that may include transformer oil analysis, cable integrity testing, equipment thermo graphy and electric motor integrity.
- Worked together to collect and trend electrical equipment data that may be against company and industry standards.
- Provides electrical surveillance programs to prevent premature failure of electrical equipment.
- We conduct critical assessment and developed equipment strategies/ maintenance plans for electrical systems, while taking into consideration an industrial standard regulatory requirement and manufacturer recommendation.
- As an electrical engineer, we execute electrical life cycle management inventory, obsolescence plans, managing spare parts, and upgrade/ replacement planning.
- Made electrical system maintenance and test planning, software upgrades, ESD testing, offline and online testing, and coordinate activities with/ without plant shutdowns.
- We provides electrical engineering aid e.g during turnarounds to global production units
- We developed power system forecast periodically and provides recommendations to resolve/ identified any power system capacity restraints within existing facilities.
- We reviewed and evaluates any available electrical one line update, in schematics and wiring diagrams.
- We conduct load flow, short circuit, harmonic, grounding and arc - flash studies.
- Compared analysis of production affiliate in other locations and used same for onsite support or rollout of global support initiatives.
-Prepares maintenance plan and instruction for the equipment based on OEM recommendation and ensures that it is implemented.
-Evaluate the condition of equipment based on its operational data and implement corrective action if necessary.
-Implement plant SOP as advised by OEM and site manager.
-Ensure gas engine oil analysis is conducted at regular interval and lubrication service conducted if require.
-Ensures full compliance with company’s emergency and HSE procedures
-Prepares and implement LOTO procedures for electrical equipment in platform.
-Raise applicable work permit in accordance with site safety procedure.
- Promotes safe work practice and environmental consciousness and comply with all applicable safety and environmental procedures and regulation.
-Maintenance periodic testing of HAES system fusion type fire, detection system, FM200 sprinkler system.
Prepares maintenance plan and instruction for the equipment based on OEM recommendation and ensures that it is implemented.
Evaluate the condition of equipment based on its operational data and implement corrective action if necessary.
Implement plant SOP as advised by OEM and site manager.
Ensure gas engine oil analysis is conducted at regular interval and lubrication service conducted if require.
Ensures full compliance with company’s emergency and HSE procedures
Prepares and implement LOTO procedures for electrical equipment in platform.
Raise applicable work permit in accordance with site safety procedure.
Promotes safe work practice and environmental consciousness and comply with all applicable safety and environmental procedures and regulation.
Maintenance and periodic testing of HAES system fusion type fire, detection system, FM200 sprinkler system.
Maintenance of vortex crown gas/UV detection system
ELECTRICAL INSTRUMENTATION ENGINEERING TOTAL OIL & GAS 2012-2013
RESPONSIBILITIES
-As electrical instrumentation engineer, I, provided programs that will make instrumentation support to the company application laboratory and R&D teams.
-I prepared short and long term schedules and also interfaced with the superintendents and others field engineers.
-I prepared and administered contract for instrumentation & control equipments especially the plant programmable logic controller (PLC) and plant regular monitoring.
-Worked to responds to every instrumentation and automation communications.
-Made design of electrical and automation system, motors protective devices, instrumentation and other electrical equipment and installed them.
-We designed instrumentation and control systems for PYRO processing plants.
- I analyze and designed the temperature control process of industrial boiler using fuzzy logic controller.
-I read and interpret electrical schematics diagram and implemented same.
- I also prepared detailed specifications for the purchase of electrical equipments as need arises.
- Responsible for every electrical and instrumentation pump and compressor production order.
ELECTRICAL INSTRUMENTATION ENGINEERING TOTAL OIL & GAS 2012-2013
RESPONSIBILITIES
-As electrical instrumentation engineer, I, provided programs that will make instrumentation support to the company application laboratory and R&D teams.
-I prepared short and long term schedules and also interfaced with the superintendents and others field engineers.
-I prepared and administered contract for instrumentation & control equipments especially the plant programmable logic controller (PLC) and plant regular monitoring.
-Worked to responds to every instrumentation and automation communications.
-Made design of electrical and automation system, motors protective devices, instrumentation and other electrical equipment and installed them.
-We designed instrumentation and control systems for PYRO processing plants.
- I analyze and designed the temperature control process of industrial boiler using fuzzy logic controller.
-I read and interpret electrical schematics diagram and implemented same.
- I also prepared detailed specifications for the purchase of electrical equipments as need arises.
- Responsible for every electrical and instrumentation pump and compressor production order.
RESPONSIBILITIES
-Sets goals interns of conceptual and process outcomes.
-I decide what students will do in the classroom to achieved these goals.
-Decide how to assessed whether these goals are achieved, including the roles of formative and summative assessment.
-Maintained a positive outlook while being flexible in my actions.
-I prepared subject and lesson materials before hand in a sequential and correlating format.
-Prepared laboratory apparatus and equipment necessary for physics practical.
RESPONSIBILITIES
-installed, maintained and repair electrical control, wiring and lighting systems.
- We interpreted technical diagrams and blueprint
-We performed general electrical performances
-We inspects transformers, circuit breakers and other electrical components
- Conduct electrical test using appropriate testing devices
- Repairs, and replaces failed equipment, wiring and fixtures.
-Worked in consonance with the National Electrical code, state and local building requirement.
-Conduct circuit breaker corrective maintenances.
-Repairs air conditions and also handle many other testing equipment.
, (CRUTECH0) Calabar.
courses: IN ELECTRICAL MACHINES AND MOTOR WITH ISBN NO 978-051-713-4 FIRST EDITION NOVEMBER, 2016
.
Power point, AutoCAD Design and ability to manage LAN & WAN network, SCADA Network, MP LAB,& MATLAB
courses: Certificate of Training on livestock farming