Corrosion Engineer
Total years of experience :9 years, 9 Months
King Fahad Industrial Port of Jubail (KFIP) Rehabilitation
Existing Berth No. 41-44, 51-53 for Petrochemical Quay (PQ)
And Berth No. 62-64 Open Sea Tankers Terminals (OSTT)
Offshore
Duties and Responsibilities:
•Responsible for reviewing the design Scope of Works, criteria of quantities for completeness and reasonableness and coordinated ith the Project-Development additional works estimates, basis when the information is complete.Prepare, reviews, contingency evaluation for evaluation for estimates, price escslation and supervises preparation of cost / quantity as required to meet specific needs and support Project trends program. Perform Independent thorough checking of cost estimate and its contents compliance to the plan, specification and other required dates prior to any schedule review.
•Check and coordinate other review such disciplines for Cathoidc Protection for Civil, Structural, Mechanical, E & I, Painting and Coatings for the purpose of eliminating errors, checking also verification of Bill of Quantity (BOQ) cost / take off and correcting for proper estimates of the Contract Documents and Construction packages.
•Responsible also for reviewing the Contracts documents and study the Scope of Works and proper estimates of Contracts documents status program and support project needs.
•Prepare checking Factory Acceptance Test (FAT) and carried out of Tools and Equipment for Calibration Test Certificate by independent test laboratory.
•Perform visual Inspection based of (RYA / RFI) and also as per Project Contract.
•Study for Vendors supply and maintain coordination to the client for final approval.
•Maintain responsibility Construction for Cathodic Protection, Civil / Mechanical / Structural for Painting and Coating as per International Codes and Standard practices National Association of Corrosion Engineer (NACE) Standard, Swedish Standard Institution (SIS), American Petroleum Institute (API), British Standard (BS), Steel Structures Painting Council (SSPC) and American Standard of Testing Materials (ASTM).
•Responsible for Inspection for Quality Control and Quality Assurance (QA /QC) materials, equipment and method of Construction and ensure that all procurement of all materials should be accordance with current applicable policies and regulations.
•Direct supervision, installation of Galvanic Cathodic Protection System (GCPS) for Onshore and Offshore such as follo
•Galva shield CC for existing Concrete Structures (Floor slabs and under deck slabs platform, Beams and Pile caps).
•Galva shield XP for spelled corroded existing Concrete Structures (Floor slabs and under deck slabs platform, Beams, Pile caps and Jetties).
•Galvanic Bulk Anode for Platform Steel Piles support (Submerged).
•Galva shield Life Jacket (Jacketing System for Steel Piles splash zone)
•Galva shield Zinc Mesh Anodes.
Cathodic Protection Systems:
•Galvanic Al-Anodes Type 82 SA46-65 kg.
•Galvanic Al-Anodes Type 82SA 46-150 TO 250 kg.
•Installations for Anodes and Jacketing of Steel Piles
•Monitoring and Energizing System
•Polarization and Depolarization
•Commissioning
•Checking continuity test/Measuring prepared records reading Cu/CuS04 (Copper/copper sulfates) and AG/Ag/CI (Silver/Silver Chloride) and with Digital Volt Meter (DVM)
•Conduct survey reports/evaluate Tidal Prediction & Referring Standard Datum Evaluation as per ICF drawing plans required.
Conduct Visual Inspection base on RFI/RFA request regarding Cathodic Protection System, Mechanical, Painting and Coating
Petron Refinery, Limay, Bataan Onshore/Offshore
Duties and Responsibility:
•Supervise and monitor the Contractor for the CP Engineer, to implementation of Corrosion monitoring testing of Cathodic Protection in Buried pipeline, Storage Tank, Vessels in CP System.
•Review the design internal and external for Cathodic Protection System for buried structures for all facilities.
•Inspection and supervision, Painting and Coating, surface preparation, using International Code of Standard and Implementation of Scope of Works for American Society Testing Materials (ASTM), British Standard (BS), Steel Structures Painting Council (SSPC), Swedish Standard Institution (SIS).
•Inspection and supervision of equipment, Tools and Materials, Coating thickness (WFT-DFT) by using thickness gauge.
•Inspection and supervision, Installation of Cathodic Protection System materials for Onshore/Offshore fields.
•Report directly to Department Head on status of the Project for Cathodic Protection system and other similar documents.
Company : Saudi Binladin Group-Petroleum, Chemical and
Mining Division (SBG-PCM)
Address : Al-Jubail Industrial City, Royal Commission Saudi Arabia
Sea Water Intake and Sea Water Cooling (SWC) Jubail
Second Industrial City, Al-Jubail, Saudi Arabia.
As a Cthodic Protection Project Engineer responsible for the day to day direction of staff and all labors in all aspects of Construction, related to the installation of Cathodic Protection System (CP) and should have reported to the Project Manager or to the Royal Commission (RC) CP Inspector.
Duties and Responsibilities:
•Monitor the project in Cathodic Protection, review the design & implementation of Scope of Works based on International Codes and Standard of Standard of National Association of Corrosion Engineers (NACE) and British Standard (BS), American Standard Testing Materials (ASTM), and other similar guidelines/
Practices International Code and Standard.
•Submission all documents i.e. submittals, as Built/Drawing and diagram and related materials approval of the client, Royal Commission (RC) as per Specification requirements before and after the installation.
•Inspection and supervision of the Q.C. Engineers, Foreman, Electrical technicians and labors to perform materials preparation, check and testing installation, location supervise by Electrical Engineer (QC), and Foreman, test and testing of rebar’s and cable resistance continuity test reading before/after installation.
•Inspection and supervision the necessary for the every stage of cable ID, to ensure the exact location of installation of MMO Titanium Mix Metal Oxide Anode ribbon mesh of each Zone/Boundaries and conduct preliminary inspection before shuttering for process will take place the structures.
•Final Inspection with QC, Foreman and RC Inspector of the stage of the structures after installation of materials Mixed Metal Oxide MMO Titanium Anode Ribbon Mesh, cable ID to ensure check and testing electrical continuity test and resistance of cable to ensure that there’s no short circuits before concrete pouring.
•Supervise and Monitoring the reading of the structures during Concrete pouring if there’s no shorts by tester Digital Volts Meter (DVM) by the electrical Technician, Foremen and QC Engineers to stand by reading recorded every five (5) minutes. And check the cable resistance and testing of (+) positive and (-) negative cable if there no short circuits and should be recorded for documented after concrete pouring.
•Supervise the installation of Sacrificial Anodes for Galvanic system and Impressed Current system Tubular Anodes for Sluice Gates of structures for Cathodic Protection Systems.
•Supervise the Electrical Technician for termination the cables the (+) Positive and (-) Negative for Pre-Commissioning the testing results shall be recorded represent to Royal Commission (RC) CP Inspector.
•Day to day, Weekly and Monthly monitoring of Cathodic Protection System (CPS) of the Concrete Structures of Sea Water Cooling (SWC) Wet Wells Project after the acceptance the Project of the Royal Commission (RC).
•Monitoring of Cathodic Protection System (CPS) for minimum should also adopted one (1) year Monitoring period to represent to the Royal Commission (RC).
•Submission of Quarterly Monitoring to the client (RC) current performance of Cthodic Protection System for initial polarization for Concrete structures for Surge Tank and Diversion Chamber.
Project : Waha Fields Facilities
Duties and Responsibilities:
•Oversee the Cathodic Protection System above the ground Storage Tanks, Pipeline, Vessel and all Refinery Facilities.
•Design and Inspection Monitoring and supervision of Impressed Current Cathodic Protection (ICCP) and Galvanic/Sacrificial Cathodic Protection (GSCP) of the structures, Storage Tank, Pipeline, Marine Structures, Offshore structures, Helipad, Valve station, Christmas tree, Jetties Onshore/Offshore fields.
•Inspection and supervision of Painting and Coating surface preparation by using International Code of Standard of British Standard (BS), Swedish Standard Institution (SIS), National Association of Corrosion Engineer (NACE) Standard, Steel Structures Painting Council (SSPC), American Standard Testing Materials (ASTM), American Petroleum Institute (API), ANSI and DNV.
•Upgrading of Impressed Current Cathodic Protection (ICCP) and Sacrificial Anodes Cathodic Protection (SACP) for Onshore / Offshore facilities.
•Day of Day Monitoring of Cathodic Protection System of buried Pipeline, Storage Tanks and Vessels.
•Inspection and supervision of Anode system.
•Routinary Maintenance of the CP System for buried Pipeline, internal CP system for Storage Tanks.
•Refurbishment and upgrading CP System for buried Pipeline, Storage, Tanks, and Vessel.
•Supervise the CP Technicians and Contractor daily Maintenance and Routinary schedules in CP System Monitoring.
•Submission of Monthly reports to the Company’s stock holder the current performance of Cathodic Protection System for Storage Tanks, Buried Pipelines, Vessels, Ports and Concrete structures.
Petro Rabigh)
Address : P. o. Box 666 Rabigh 21911
Project : Caltex Refinery, Batangas, Philippines.
Mechanical Engineering for Engineering Department for Corrosion and Painting/Coating Inspectors.
Secondary