Senior Electrical Engineer
NBTC
Total des années d'expérience :13 years, 6 Mois
11/0.457KV, 14no’s X 2 MVA Al Ahleya make transformer with associated protection devices.
• 11KV SWGR associated dedicated RCP and Ann panel with TAMCO Malaysia make.
• 440V LV SWGR, MLDB, EMSB MCC, EMCC, PFCC, Feeder Pillar, Pedestal panel, DB’s from L&T make.
• 110V AC and DC UPS panels and associated Battery bank with battery disconnecting Switch from Bourri make.
• Successfully laid 102 kms PLDS cable laying 4F cable on the pipeline as well as underground for monitoring leakage in the pipeline. Pig Signaler, various sensors required for Pipeline works
• Successfully lead CP for 250 km of U/G and A/G pipelines. CORPRO make Rectifier transformers and associated JBs such as PJB, NJB, AJB and Test post, Anode, CP Coupon, Cad Welding and cable works for pipeline.
• Spearhead the installation of solar panels (1373AH/day) in 20 manifold for supply to the systems (FOC, RTU, ESD, DCDB, CCB, Isolators, etc.) conducting performance tests and ensuring compliance with design specifications
• S/S Lighting, Small power, Earthing and lightning protection system.
• Fire alarm/F&G system: FACP, IR/UV, SD, HD, MCP, MPS, BL, Break Glass and Sounder.
• Fire Suppression system: NN100 system associated with piping and alarm facilities.
• Testing of Substation Equipments such as LV, HV switchgear, Circuit breakers, Transformers, Bus ducts, Cables, Fire alarms, Fire and Gas, and fire suppression systems (NN100).
• Startup and Pre-commissioning activities, simulation checks of substation Equipment etc…
• Building Management system Services: Execution of LAN & Communication, Public Address System, Lighting control system, Power Automation system, Access Control, Intruder systems, perimeter intruder systems, and Security system.
• Cathodic Protection System: CORPRO make Rectifier transformer and associated JBs such as PJB, NJB, AJB and Test post, Anode and cable works.
• Fire Alarm F&G System: FACP, IR/UV, SD, HD, MCP, MPS, BL, Break Glass and Sounder.
• Plant Lighting Sources: Installation, Pre-commissioning and Commissioning of Plant utilities such as HVAC, MLVDB, EMDB, MLDB, LDB, PDB, ELDB, and EPDB for A/C, Street lighting, Process area lighting, Tank lighting, stairway lighting, Building internal and periphery lighting, Car park lighting, plant infrastructure lighting.
• LAN & SECURITY Systems: CCTV Camera, PIR, Access Door Contact System, FOC Splicing, Patch Panel Installation, CAT6 cable laying, termination, OTDR,
Diesel Fuel Storage and Transfer System.
• Supervised the electrical control systems - contactor relays, ELCB, MCB’s, drives, pumps, motors, fans, cooling units for panels basically (Rittal), Isolator switches, overload relays, etc.
• LT & HT panel’s Installation and Erection
• All types of Cable Glanding and termination.
• AC UPS panel, DC UPS panel & battery’s installation &Erection
• Preparation of construction schedule and manpower arrangement as per the client priority and deadline dates.
• Worked with the teams to monitored each group’s productivity against the actual scheduled quantity. Arranged meetings to review the progress achieved and for the implementation of the forecast schedule.
• Preparation of manpower & equipment timesheets for the variation works other than the scope.
• Attended the weekly meeting with the client for the progress reviewing, ITR close out the schedule & forecasting the next week's plan.
Erection, Operation, and Maintenance of Power Transformers 33/11KV and 11/0.4KV \[Oil Level, Breathing device, Silica, gel filling, physical damages, bushing, oil leakages, valve and piping plugs, and radiators\].
• Involved in Erection, Operation, and Maintenance of Circuit Breaker (Vacuum), Instrument Transformer (CT&PT), Protective & Control Circuit, Testing and Calibration of meters, relays of the Panel, Battery chargers.
• Executed in cable laying of HT Cables, SwitchYard, Control Panel Connection, Instrumentation works, and testing of HV Cables.
• Issuing Work Permit of Power Transformer and EHT Feeders to concerned authorities and preparations of various records such as monthly operating review, daily log sheets, etc.
• Maintaining daily, weekly, and monthly reports of the Substation activities.
• Coordinates with the supervisors in case of emergency works and Shutdowns in the substations.
• Assist in conducting of Motor Stability Test, Solo Run Test, Loop impedance check for motors, Hi-Pot test of MV, HV Cables and Switchgear, IR test of Cables/Motor/Transformer/Generators/Switchgears,
• Installation of Earthing Systems (System, Electrical, Instrument, Equipment, etc.) and Lighting Arrestors in Substations and Testing Earthing Open and Closed Circuits.
• Installation and Testing of UPS and Battery System (Electrolyte filling for batteries, BETA checkup) with charging and Discharging test.
• Familiar with all types of approved drawings, and As-built.
Installation and wire of lighting Fixtures, Small Power Panels, Fire Alarm, and grounding cabling systems.
• Assemble and Install Emergency Power backup system, HVAC unit that operates through the electrical system.
• Installation of Circuit Breaker, Switches, Outlets, Electronic equipment, and Communication Systems.
• Installation of Data / Voice, Low Voltage and Security Systems
• Termination and Testing of UTP Cables and Network Points with Fluke Meter
• Follow Blue Prints and approved for Construction drawing before implementation.
• Installation of Rigid Steel Conduits, Trays, Supports, and Fittings for Equipment and cable routing.
• Refurbishing, problem diagnosis, and troubleshooting of existing Electrical Systems.
• Conduct daily toolbox meetings with the crew for daily activities and daily safety task instruction.
• Major thesis work on the verification of “Improving the efficiency of Wireless Sensor Network through Signal Processing Technique” during Post-Graduation. Publications • “Improving the Efficiency of Wireless Sensor Networks through Signal Processing Techniques.” International Journal of Engineering and Advanced Technology (IJEAT), Volume-1, Issue-5, June 2012 • “Performance Analysis of Wireless Power Transfer to the Implantable Drug Delivery System using Helical Antenna with Inductive Coupling.” International Journal of and Advanced Technology (IJEAT), Volume-1, Issue-5, June 2012 • “Dynamic Event Based Energy Efficient Routing Protocol For Wireless Sensor Networks (WSNs)”IO International Journal of Engineering and Advanced Technology (IJEAT), Volume-1, Issue-6, August 2012 • “Ambient Data Collection with Modeling and Implementation of QoS in Wireless Sensor Networks” International Journal of Engineering and Advanced Technology (IJEAT), Volume-1, Issue-6, August 2012 • Attended a Workshop on “Application of Qualnet in Wireless Networks” from SHIATS. • Attended a Workshop on “Advance VLSI Design Automation” from SHIATS. • Attended a Workshop on “Advanced OFC System Designing using Opti System” from SHIATS. • Attended a Workshop on “SIEMENS PLC” from SHIATS.
• Major project on “ADAPTIVE INFINITE IMPULSE RESPONSE FILTERS” during , Jan- June, 2008. • Successfully completed a 4 weeks summer Industrial training at Bharat Heavy Electrical Limited (B.H.E.L)-A Govt. of India Enterprise in “CNC-Control system” at Haridwar in May-June 2007. • Successfully completed a 4 weeks summer vocational training at Bharat Sanchar Nigam Limited (B.S.N.L)-A Govt. of India Enterprise in “E10/OCB-283” switch at telephone exchange Allahabad in May-June 2006
Intermediate Board: Indian School Certificate Examination (ISC) • Acted as a Team Manager at the Inter-Institutional school festival “Confluence-02” held at St. Joseph’s College Allahabad. • Represented the School & College at Football matches. • Represented as a House Captain in the College.
