Demetrio Bautista, SENIOR ELECTRICAL ENGINEER

Demetrio Bautista

SENIOR ELECTRICAL ENGINEER

EHAF CONSULTING ENGINEERS

Location
Qatar
Education
Bachelor's degree, Electrical Engineering
Experience
26 years, 8 Months

Share My Profile

Block User


Work Experience

Total years of experience :26 years, 8 Months

SENIOR ELECTRICAL ENGINEER at EHAF CONSULTING ENGINEERS
  • Qatar
  • My current job since January 2008

Sener Ingeniera Y Systemas
Project : Lusail Light Rail Transit
The LLRT project is grouped into three sections:
1) At-Grade section consist of twenty two thousand seven
hundred meters (22.7 km) at-grade and elevated track
having twenty four (24) at-grade stations, one elevated
station, two open-cut and two enclosed stations.
2) Underground section consists of ten thousand four
hundred meters (10.4 km) of underground track having
eight (8) stations.
3) Depot
Scope : Design Verification Engineering
: Site Supervision

ELECTRICAL ENGINEER at SAUDI ARABIAN AIRLINES/M/S EL-KHEREIJIE CORP
  • April 1993 to April 1997

Project : Digitel Commercial Buildings

ELECTRICAL ENGINEER at LYON TEXTILE MILLS INCORPORATED
  • United States
  • January 1984 to January 1990

Perform routine inspection and maintenance repair works.
 Monitoring and inspecting all motors and other electrical equipment
during operation.
 Troubleshooting and maintenance of switchgears, distribution boards,
panel boards, vacuum contactors and all types of magnetic controls.
 Perform preventive maintenance works as per scheduled daily, weekly,
monthly, quarterly, semi-annually and annually.
 Design and estimate of new and additional electrical installations.
 Install, troubleshoot and maintain all lighting installations.
9

Supervision Consultant at Ali Khalifa Al Hitmi & Co
  • to
Contractor at Commodore Qatar Contracting Co. LLC
  • to

Al Hitmi Fox Hills Residential Project RES-D17
The Al Hitmi Fox Hills RES-D17 project is a residential
building located in Lusail City, Doha, Qatar. The building
consist of B+G+ 4 Floors and is a green building having 2
star rank. The area for each floor thus functioned such as
Car parking at basement with Storage occupancy and MEP
utility services, Residential occupancy at Ground Floor, First
Floor, Second Floor, Third Floor with 3 Villa type units,
Fourth Floor with the 2nd Floor of Villa type units,
Mechanical rooms and Swimming pool at Lower Roof level.
The building is nine thousand nine hundred two (9, 902)
square meters and approximately cost forty six million
Qatari Riyals (46, 000, 000.00 QR).

Supervision Consultant at Ali Khalifa Al Hitmi & Co
  • to
Contractor at Gulf Falcon Contracting Co. WLL
  • to

Al Hitmi Fox Hills Residential Project RES-A37
The Al Hitmi Fox Hills RES-A37 project is a residential
located in Lusail City, Doha, Qatar. The building consist of
B+G+ 4 Floors and is a green building that is equip by solar
power heater & centralized air conditioner. The area for
each floor thus functioned such as Car parking at Basement
3
with Storage and MEP utility services occupancy,
Residential occupancy at Ground Floor, First Floor, Second
Floor, Third Floor and Fourth Floor. Swimming pool is
located at Lower roof level. The building is ten thousand
four hundred twenty four (10, 424) square meters and
approximately cost forty six million four hundred ninety five
one hundred fifty six Qatari Riyals (46, 495, 156.00 QR).

Supervision Consultant at Ali Khalifa Al Hitmi & Co
  • to
Contractor at Gulf Falcon Contracting Co. WLL
  • to

Al Hitmi Fox Hills Residential Project MU-E08
The Al Hitmi Fox Hills MU-E08 project is a residential
building located in Lusail City, Doha, Qatar. The building
consist of 2B+G+M+6+Roof Floor and is a mixed used
building that is equip by solar power heater & centralized
air conditioner. The area for each floor thus functioned
such as Car parking at two (2) Basements with Storage and
MEP utility services occupancy, Retail and Residential
occupancy at Ground Floor, Three (3) Retails at Mezzanine
Floor, Residential occupancy at First Floor, Second Floor,
Third Floor, Fourth Floor, Fifth Floor, Sixth Floor and Roof.
Floor The building is fifteen thousand eight hundred twenty
five (15, 825.00) square meters and approximately cost sixty
eight million Qatari Riyals (68, 000, 000.00 QR)
Job Description :
 Review the Design and related IFC drawings (For three (3) Residential
Projects) prior to Project's commencement to verify its consistency and
raise any related ambiguities for discussion with the Project Manager.
 Review the Project's Specification and check its consistency with the
Design.
 Review submittals like Sub-contractor's Pre-qualification documents,
material submittals, method statements, proposals, mock-ups, Factory
visit, shop drawings (including Coordination drawings, Builder's Work,
etc.., ) As-built and etc.. prior to construction stage.
 Evaluate the Value Engineering Ideas and its conformity with the
Specifications, Standards Regulations and other related objectives.
 Complete Supervision on all stages of execution
 Respond to technical queries and RFIs.
 Liaise with other disciplines' Seniors involve for proper coordination
 Conducts site inspection for work progress monitoring and quality
standards audit.
 Evaluates and provides weekly reports of progress of the project.
 Review and evaluate Contractor's Payment Certificates.
 Attend progress, technical and design meetings with Contractor and
Client's representative.
4
 Inform the Design Department of any intended modifications, to obtain
their prior consent to avoid unnecessary implications.

SITE ENGINEER at The Summit One Officer Tower
  • to

Project : PACIFIC PLAZA TWIN TOWERS CONDOMINIUM, FORT
BONIFACIO, GLOBAL CITY, 3B + G + 54F
Job Description :
 Design power system facilities, equipment and coordinates construction.
 Prepare drawings and specific type of equipment and materials to be
used.
 Estimates labor, materials, construction and equipment cost.
 Supervise operation of installation in conformance with design and
operational standards.
August, 1997 - : ULTRABILT CONSTRUCTION INCORPORATED
October 30, 1999 Unit 24D, 24 Floor

ELECTRICAL MAINTENANCE ENGINEER
  • to

Perform routine inspection and maintenance repair works.
 Monitoring and inspecting all motors and other electrical equipment
during operation.
 Troubleshooting and maintenance of switchgears, sub-main distribution
boards, distribution boards, vacuum contactors and all types of magnetic
controls.
 Perform preventive maintenance works as per scheduled daily, weekly,
monthly, quarterly, semi-annually and annually.
8
 Design and estimate of new and additional electrical installations.
 Install, troubleshoot and maintain all lighting installations.
March 19, 1991 - : ASIAN CONSTRUCTION & DEVELOPMENT CORP.
December 10, 1992 (ACDC OR ASIAKONSTRUKT)
Second Floor Union Ajinomoto Building

ELECTRICAL ENGINEER at Senator Gil J. Puyat Avenue
  • Philippines
  • to

Project : 500 KV- EHV Kalayaan- San Jose Transmission Lines
Job Description :
 Study the design drawings of transmission lines and plan for strategic
execution on site.
 Prepare the equipment and materials to be used as per bill of quantities
and specifications.
 Conduct inspection of materials and assure of good quality as per
specifications.
 Conduct field survey and grounding test for each and every tower.
 Estimate and prepare drum schedule of cables for layout.
 Calculate ACSR cable length for sagging with reference to design.
 Handling manpower and direct assign jobs.
 Inspect and check markings at tower’s column for cable sag in every span
of towers.
 Supervise stringing of ACSR cables.
 Responsible for final sag of cable with reference to temperature and
tension design calculation.
 In charge for final sagging and inspection.
 Responsible to conduct final inspection of transmission lines for handing
over approval.

ELECTRICAL ENGINEER
  • to

Review and study the Electrical Plans/Design and shop drawings prior to
Construction Stage.
 Complete Supervision on all stages of Execution
 Review submittals like Sub-contractor's Pre-qualification documents,
material submittals, method statements, proposals, mock-ups, shop
drawings (including Coordination drawings, Builder's Work, etc.., ) and
etc.. prior to construction stage.
 Respond to technical queries and RFIs.
 Evaluate and provide weekly reports of progress of the project.
 Conduct Electrical Testing for building wires (Insulation Resistance Test
and Continuity Test) and for Medium Voltage Switchboards (Insulation
Resistance Test, Continuity Test, Dielectric Test-3KV for 1 minute and
Mechanical Interlocking Operations).
 Conduct site inspection for work progress monitoring and quality
standards audit.
 Conduct Testing and Commissioning of Electrical Equipment and Devices.
Client : Al Asmakh Real Estate
Project : Al Asmakh Hotel
The project consists of 2B+G+M+10 rooms, Swimming pool
and restaurant with a built up area of 7195 m2. The
estimated total cost of 60 Million QR.
Job Description :
 Review and study the Electrical Plans/Design and shop drawings prior to
Construction Stage.
 Complete Supervision on all stages of Execution
 Review submittals like Sub-contractor's Pre-qualification documents,
material submittals, method statements, proposals, mock-ups, shop
drawings (including Coordination drawings, Builder's Work, etc.., ) and
etc.. prior to construction stage.
 Respond to technical queries and RFIs.
 Evaluate and provide weekly reports of progress of the project.
 Conduct Electrical Testing for building wires (Insulation Resistance Test
and Continuity Test) and for Medium Voltage Switchboards (Insulation
Resistance Test, Continuity Test, Dielectric Test-3KV for 1 minute and
Mechanical Interlocking Operations).
6
 Conduct site inspection for work progress monitoring and quality
standards audit.
 Conduct Testing and Commissioning of Electrical Equipment and Devices.
February 19, 2006 - : SAUDI LEBANESE MODERN CONSTRUCTION Co.
March 20, 2008 P.O. Box 1699, Riyadh 11441, K. S. A.
Telephone No. 4767450

Education

Bachelor's degree, Electrical Engineering
  • at Mapua Institute of Technology
  • January 1983

Specialties & Skills

AUTOCAD
CONSULTING
CUSTOMER RELATIONS
LAYOUT DESIGN
LIGHTING
MATERIALS MANAGEMENT
MICROSOFT WORKS
REQUIREMENTS
SUPERVISORY SKILLS
TROUBLESHOOTING

Languages

English
Expert
Tagalog
Expert