Eid Gaballa

Project Manager at Suido Kiko Middle East

• Saudi Arabia
• My current job since March 2010

Water and Wastewater Treatment

site project manager at Suido Kiko Middle East

• Saudi Arabia
• My current job since March 2010

Responsible for designing Water & Wastewater treatment plants including design calculations, PFD, P&ID,
Equipment Sizing, Duty List, Control Philosophy, general layout, hydraulic profile, piping and testing &
commissioning manuals preparation. Assisted proposals manager in preparing technical and commercial offers
including necessary details from designing, quotations, to costing and presentations.

PROJECT at Al-Kharj

• Saudi Arabia
• January 2013 to December 2015

Brackish water reverse osmosis 56, 000 m3/day (BWRO) ROLE: PM
CAPACITY: 50, 000 M3/day TECHNOLOGY: BWRO

PROJECT at KSA

• United Arab Emirates
• November 2011 to November 2014

Brackish water reverse osmosis 50, 000 m3/day (BWRO) ROLE: PM
CAPACITY: 50, 000 M3/day TECHNOLOGY: BWRO
CLIENT Riyadh Water Director (RWD) CONSULTANT: Khalid Saleh
Consultant
VALUE: $9.4 M
DESCRIPTION: Design, Supply, Install and Commissioning 50, 000 M3/day. Brackish Water Reverse osmosis Plant Consist of
Deep wells, Colling towers, lamella, Gravity Filters, Feed Pumps, Cartridge filter, LV-high Pressure pumps, RO
skis, Flushing system, CIP system, Dosing systems, --ect

PROJECT at KSA

• United Arab Emirates
• December 2010 to December 2011

Sea Water Desalination Plant (SWRO) ROLE: PM
CAPACITY: 10, 000 M3/day TECHNOLOGY: SWRO
CLIENT SAWACO CONSULTANT: V3 VALUE: 11.2
DESCRIPTION: Built 4x2500CMD.Sea Water Reverse Osmosis (SWRO) Plant using Desalination Technology with input TDS 47, 000
mg/l. Flow passing through Micro- filter with MF/UF Skids to Break Tanks. Then feed Pumps (GRP casing) to
5Micro Cartridge filter to HPP to Turbo-charged to SWRO Skid. Fully automated plant with remote control.

PROJECT at KSA

• United Arab Emirates
• January 2010 to January 2011

King Abdulaziz University ROLE: PM
CAPACITY: 8, 000
500
100
M3/day
M3/day
M3/day
TECHNOLOGY: MBR - rehabilitation
MBR - new
BWRO - new
CLIENT King Abdulaziz University CONSULTANT: Zuhair Fayez VALUE: $3.7 M
DESCRIPTION: Design, Build and Commission Water and Wastewater Treatment Plant working by MBR (Membrane Bio-Reactor)
Technology using RC-Concrete Circular Tank complete under-ground divided to Equalization, Anoxic, Aeration
and MBR Tank, Complete with set of Blowers, Diffuser, Mixer, Submersible Pumps, Suction Pump in Jeddah

PROJECT at KSA

• United Arab Emirates
• July 2008 to December 2010

MED desalination Plant ROLE: Mech. Engineer
CAPACITY: 1, 300 M3/day TECHNOLOGY: MED
CLIENT Qatar National Cement CONSULTANT: QNC VALUE: $11.7 M

PROJECT at Wastewater treatment Plan

• France
• January 2008 to January 2010

Install new desalination plant of 1300m³/day distillate water for QNCC, Plant Contains pipe lines (HDPE, GRP and
Stainless steel pipe), Tanks, Boiler, Pumps and Filter. Steel structural building (40x30). With fencing
Construct under water on pipe lying on seabed 1200m-L HDPE 400 mm dia. Along with passive intake screens.
Plant Supplier

Project Manager at PROTEC

• United Arab Emirates
• January 2006 to January 2008

Research and development Engineer at R&D) @ Misr Compressor Manufacturing Co. (ZMC) Hermetic

• January 2004 to January 2006

Redesign and development the refrigerator compressor part's through
1. Apply DOE, statistical methods, and analysis prototypes.
2. Using CAE tools (FEA, CFD, ---ect.)
3. Demonstrated knowledge of applied mechanical engineering in product design and evaluation.
4. Optimize the existing design by using 3D CAD software
5. Identify, break down and solve a variety of difficult technical problems
6. Utilize numerical and finite element methods to produce more efficient products with lower cost.
7. Document (plans, requirements, drawings, design reviews, and test methods).
8. Set product life cycle and facilitate production process.