خبير سلامة مهنية
جسارة
Total des années d'expérience :17 years, 4 Mois
Advise management on loss and fire prevention policies, standards and procedures, and recommend changes that can improve risk management programs.
Review existing company standards, procedures and instructions and recommending cost effective safety enhancements to facilities to align them with the latest international standards.
Review long-range trends in loss/fire prevention engineering and advising management on a company response to these trends.
Research emerging safety technologies and conducting feasibility studies and cost analyses to identify improved solutions to existing safety problems and emerging regulatory requirements.
Act as an expert process safety resource for risk identification and mitigation during design, construction, commissioning, turn-over to operations, on-going operations, management of change and decommissioning of facilities.
Participate in design reviews, hazard assessment reviews, incident investigations and audits.
Identify emerging regulatory changes, industry trends and issues and developing recommendations to mitigate risk and communicating findings to key stakeholders.
• Support the HSE Manager and team with planning, coordinating and implementing of effective HSE policies, guidelines and procedures to ensure that the department objectives are met.
• Provide support to Project and Operation team in all aspects of safety, occupational health,
safety and environmental issues.
• Support the HSE Manager in ensuring HSE compliance and perform regular HSE audits in the
areas of site operations.
• Attend pre-job, planning and client meetings as required on HSE related matters.
• Provide support to the Dept. on the implementation of Company-wide HSE initiatives ISO 14001, OHSAS 18001, etc
• Assist with developing HSE plans that comply with Company policies and procedures as well as client requirements
• Ensure training, tool box meetings, and drills are implemented as part of the company’s training
and HSE program, i.e. emergency response systems, etc.
• Investigate and complete the process for close out of all Accident Investigation Reports and prepare/submit lessons learned to the HSE Manager for promulgation to the management
• Provide HSE aspects of Company Bid Submissions as requested.
• Assist in the development of project specific HSE procedures.
• Conduct HSE trainings and orientation to all new employees.
• Ensure all worksites are HSE compliant with Company policies and safety standards.
• Undertakes general safety inspections and ensures the adherence to the general safety rules and regulations in conformity with safety and loss prevention Formulates plans and handles safety orientation classes for new-hire.
• Schedules and conducts annual refresher safety training classes for mine personnel as draws up lessons for safety training and obtaining approvals from the supervisor/manager before they are imparted to the trainees.
• Evaluates the available facilities for safety compliance and suggests modifications, if
any Counseling the employees on correct safety behavior to be followed in the daily work
situations.
• Supports the management for all safety efforts.
Surveys work methods and practices to determine extent of compliance with safety and loss prevention measures. Develops work standard operating procedures to minimize unnecessary
• Exposure to unsafe working conditions.
• Evaluates safety equipment and sets up an example himself for others to follow with
• Assisting the manager in maintaining an active departmental Safety Program; periodically
review and input data, as required, for achieving optimum departmental safety goals.
• Investigate and advise on the critical activities and related safety issues and recommend
procedures to improve.
• Provide personal support to all safety activities and safety procedures.
• Instill safety awareness through personal periodic safety contacts and conduct safety discussions at departmental meetings.
•
Promote safety awareness and share the new company safety regulations to all department personnel.
• Conduct and lead investigation committees for safety related incidents and near misses as
• Required; and track, follow-up and report on the recommendations.
• Apply thorough root cause/Tap Root analysis in all safety related.
• Investigations when involved.
• Conduct site visits on a regular bases to inspect and ensure environmental health and
safety (EH&S) compliance.
• Conduct safety related frequent studies and audits as required.
• Assist management in evaluating safety recommendations and suggestions.
• Review departmental accidents and provide recommendations for prevention of future
accidents.
• Facilitate corporate safety reviews and ensure all recommendations are implemented.
• Track and report the progress of all safety related recommendations.
• Attend quarterly safety inspections of various divisions.
• Ensure that prompt corrective action is initiated whenever unsafe conditions and unsafe acts are noted.
• Facilitate and critique the department emergency drills.
• Conduct periodic reviews of the MSSD Safety Management System Manual and issue
timely revisions as required.
• Prepare and attend Safety Management Committee (SMC) meetings; take minutes of the meetings; generate action item reports and follow-up on all items till completion.
• Follow-up with the divisional safety officers on the implementation of all approved safety ideas such as suggestions, unsafe conditions, etc.
• Conduct regular meetings with division safety officers to discuss and review safety activities being implemented or that will be implemented in the department.
• Produce and issue to management a monthly Safety Performance Report, which should include safety related statistics, KPIs and subsequent analysis where necessary.
• Train nominated safety officers to handle EH&S responsibilities.
• Organize safety themed campaigns to raise the department safety awareness.
• Designed directed and implemented effective safety programs and onsite safety training monitored facilities and processes for adherence to OSHA guidelines by overseeing.
• Inspections recommending corrective measures and preparing for OSHA safety audits and investigations.
• Training Instructor for Work Safety Forklift Training Firefighting CPR and First Aid.
• Developed occupational safety control and loss control manuals.
• Experienced and effective in working with people of diverse cultures and. backgrounds and
interacting with all levels of management and personnel.
• Managed surveys performed risk assessment conducted safety inspections provided follow-up training and conducted audits.
• Identified and corrected weaknesses in occupational safety program.
• Responded to emergencies as requested.
• Preparing and documenting incident reports.
• Monitoring control rooms.
training monitored facilities and processes for adherence to OSHA guidelines by overseeing.
• Inspections recommending corrective measures and preparing for OSHA safety audits and investigations.
• Training Instructor for Work Safety Forklift Training Firefighting CPR and First Aid.
• Developed occupational safety control and loss control manuals.
• Experienced and effective in working with people of diverse cultures and backgrounds and interacting with all levels of management and personnel
• Managed surveys performed risk assessment conducted safety inspections provided follow- up training and conducted audits.
Field Instruments.
• Effective corrective maintenance at breakdown period in PESD system, complex loop logic
and replacement of I/O and associated modules.
• Involved in day-to-day preventive maintenance for field instruments, individually and team wise.
• Inspection, calibration, loop simulation based on ISO procedure and standards.
• Having good knowledge in servicing and calibration of Smart & Foundation field bus protocol instrument devices with communicator, and servicing calibration of pneumatic, hydraulic, operated valves and accessories (Positioned, Booster relay, Lockup Relay, Transfer valves and I/P, ).
• Troubleshooting and maintenance of rotating equipment protective control system Such as Bentley Nevada Vibration System.
Field Instruments.
• Effective corrective maintenance at breakdown period in PESD system, complex loop logic and replacement of I/O and associated modules.
Involved in day-to-day preventive maintenance for field instruments, individually and team wise. Inspection, calibration, loop simulation based on ISO procedure and standards.
• Having good knowledge in servicing and calibration of Smart & Foundation field bus
protocol instrument devices with communicator, and servicing calibration of pneumatic, hydraulic, operated valves and accessories (Positioned, Booster relay, Lockup Relay, Transfer valves and I/P).
• Troubleshooting and maintenance of rotating equipment protective control system
Such as Bentley Nevada Vibration System,
• Bentley Nevada vibration monitoring system probe installation and calibration of probes and monitor with TK-3.
• Periodic check carried out in Trip loops and status confirmation, alarm simulation and verification.
• Having a sound knowledge on Safety factor with in Hazardous location and
intrinsically safe equipment.
595/5000 samam barnamaj al'iiliktruniat alsinaeiat waltahakum bima ywafq 'ihtyajat suq aleamal almahaliati, bialaietimad ealaa almaeyar almahnii alwatanii limihinat faniyin alkatruniaat, wayatadaman albarnamaj altadrib ealaa almiharat al'asasiat fi fi alhasib walhindasat alkahrabayiyat bial'iidafat 'iilaa almiharat altakhassiat fi majal al'iiliktruniat mithl aleanasir al'iiliktruniat waldawayir almintqiati, waldawayir alalkitruniat, walkatruniaat alquaa, wa'anzimat altahakum watahliliha wakadhalik aistikhdam alhasib bialnazm wadirasat 'ajhizat alqiasat wadirasat alhakimat alqabilat lilbarmajat walaghatiha watatbiqatiha walhasibat walmuealajat aldaqiqat watatbiqatiha fi altasmim ka'ujhizat tahakum, wayashmal albarnamaj kdhlk altadrib ealaa alsiyanat alalkutruniat. The program is designed to meet the needs of the local labor market, based on the national professional standard for the profession of electronics technician. The program includes training in basic skills in computer and electrical engineering in addition to the specialized skills in electronics such as electronic elements, logic circuits, electronic circuits, , Control systems and analysis as well as the use of computer systems and study of measuring devices and study of programmable controllers and languages and applications, computers and microprocessors and their applications in design as devices Rule, the program also includes training on the electronic maintenance
Le lien a été supprimé pour non-respect des conditions d'utilisation. Veuillez contacter l’équipe d'assistance pour plus d'informations.