Eslam Moubarak, Senior Maintenance Instrumentation and Control Engineer

Eslam Moubarak

Senior Maintenance Instrumentation and Control Engineer

Egyptian LNG

Lieu
Egypte - Alexandrie
Éducation
Baccalauréat, Electrical Engineering (Communications& Electronics Dept
Expérience
15 years, 8 Mois

Partager Mon CV

Empêcher usager


Expériences professionnelles

Total des années d'expérience :15 years, 8 Mois

Senior Maintenance Instrumentation and Control Engineer à Egyptian LNG
  • Egypte - Idku
  • Je travaille ici depuis octobre 2023
Maintenance Instrumentation & Control Engineer à Egyptian LNG
  • Egypte - Idku
  • octobre 2019 à octobre 2023

Responsible for turbo-machinery Instrument & Control maintenance scope at ELNG
o Carry out maintenance activities (Core & auxiliary systems) for 12 Ea BH frame 5D Gas turbine - Turbo
Compressor with BH Mark Vie Control System.
o Coordinate with BH team for turbo compressors major activities
o Implantation for MARK Vie Control System upgrade plan:
▪ Upgrade MARK VI to MARK Vie Control system along 4 years plan (according to ELNG
Shutdown plans 2019 to 2022)
▪ Challenge to carry out the upgrade with commissioning activities successfully during ELNG
planned shutdowns & handover the M/Cs to production team
▪ Upgrade including hardware (TMR controller, IO Packs, IO NET and HMIs) and software
including (ToolBox ST & Cimpilicity)
o Coordinate with BH team 24KHr Major activities (Instrument Scope)
▪ LTPI & Minor Compressor Inspection for Train2 S11 & S21 in April & August 2021
▪ Carry out commissioning & start-up activities after inspection
o Upgrade plan Anti-surge controllers & valves
o Start with upgrade 2 anti-surge valve IMI actuators (CV300) with it’s pneumatic circuit
o Upgrade old analog positioner by STI FASTRAK smart positioner
o Carry out asset life study for anti-surge controllers (CCC S3+) upgrade
o Carry out maintenance activities (Core & auxiliary systems) for 4 Ea SIEMENS GT-35 Gas turbine - Turbo
Generator (GTG) with ABB ADVANT Control System.
o Join SIEMENS team to carry out Level C Inspection (Instrument & Control Scope)
o Turbo-Generator (GTG) Fire & Gas System Upgrade Plan
o Upgrade F&G control system for GTG MINIMAX FMZ4100 to FMZ5000
o Modify the wiring & obsolete devices as per manufacture recommendations
o Carry out commissioning & start-up for new system
o Carry out asset-life study for GTG control system & plan to upgrade control system to SIEMENS PCS7
o Carry out proactive enhancement plan for bad actor devices at GTG (According to GTG run/stop plan)
o Proactive plan to replace all fuel gas valves pneumatic circuits
o Proactive plan to replace speed sensors with its loop
Responsible for Maintenance Instrumentation Workshop Activities at ELNG
o Join ELNG Instrument team to achieve our KPI target (SHELL Asset Management System)
o Utilization of instrument manpower according to workload
o PM compliance, to plan to complete PM activities with-in time & before last acceptance date Control
o Control CM/PM ratio by verifying site activities to match PM work instructions
o Daily organize & follow up instrumentation activities according to weekly plan maintenance activities.
o Attend Daily Work Prioritization Meeting (DWP) with maintenance planning & day operation to discuss
opening operation work request with its priority.
o Attend Weekly Plan meeting to discuss upcoming weekly plan activities, it’s manpower & services required.
o One of ELNG RCM team (Reliability Centered Maintenance)

Maintenance Instrumentation & Control Shift Engineer (EMC Manpower) at Egyptian LNG (Idku-Egypt) à Egyptian LNG
  • Egypte - Idku
  • avril 2019 à septembre 2019

Responsible for Instrumentation and control System maintenance for:
o Instruments related to ELNG field package
o System overrides in DCS and SIS.
o Root cause analysis for trips and trending displays
o Carried out CM and PM for instrumentation and control packages.

Turbo machinery Instrumentation & Control Shift Engineer (EMC Manpower) at RASHPETCO SHELL (JV) à Rashpetco
  • Egypte - Idku
  • avril 2015 à mars 2019

Responsible for Instrumentation control System maintenance for:
o GE PGT-10 Gas Turbine Compressor
o GE PGT-25+ Gas Turbine Compressor
o SIEMENS SGT-300 Gas Turbine Power Generation
o SIEMENS SGT-400 Gas Turbine Compressor
o SIEMENS SGT-100 Gas Turbine Power Generation
o Responsibilities & Duties:
▪ Carry out Preventive Maintenances for package & auxiliaries instrument.
▪ Carry out Preventive Maintenances for Fire & Gas Detection & Fire Fighting Protection.
▪ Carry out Corrective maintenance for running & stand-by machines.
▪ Daily check for machines operation status.
▪ Issue, follow up & Implement of MOC for any modifications

Electrical Engineer at Centra Corporation Qatar (Doha, Qatar) à Centra Co - Qatar
  • Qatar - Doha
  • mars 2013 à février 2015

- Electrical Engineer grade (C) Certify from Ministry of Municipality & Urban Planning (Qatar)
- Fire Alarm Engineer Certify for Qatar Civil Defense.
- Design, evaluate, installing, testing, commission and maintain Fire Alarm System (Conventional & Analog
Addressable), certifying and reporting in accordance with national & international standards (NFPA, QCS,
QCD).
- Prepare drawings (Shop Drawings & As Built Drawings) and documentation (Technical Submittals) for all
existing and new components of the Fire Alarm systems.
- Prepare regular progress reports.
- Study new projects & prepare suitable quotations according to specifications & Client budget.
- Develops, establishes, recommends and enforces safety practices applicable with systems.

Electrical Engineer at Electrical Systems Engineering Company (ELECTROSYS) (Alexandria, Egypt) à Electrosys
  • Egypte - Alexandrie
  • septembre 2008 à février 2013

- Design, evaluate, installing, testing, commission and maintain Fire Alarm System (Conventional & Analog
Addressable), certifying and reporting in accordance with national & international standards.
- Prepare drawings (Shop Drawings & As Built Drawings) and documentation (Technical Submittals) for all
existing and new components of the Fire Alarm systems.
- Prepare regular progress reports.
- Study new projects & prepare suitable quotations according to specifications & Client budget.
- Develops, establishes, recommends, and enforces safety practices applicable with systems.

Éducation

Baccalauréat, Electrical Engineering (Communications& Electronics Dept
  • à Alexandria University
  • juillet 2008

Very Good (2008) Graduation Project: Implementation of WiMAX Transceiver on FPGA (Spartan 3A) using VHDL programming Language. Graduation Project Grade: Excellent

Specialties & Skills

Gas Turbines
Instrument Control
Allen Bradley
TROUBLESHOOTING
ASSET MANAGEMENT
BUDGETING
CALIBRATION
CIMPLICITY
DOCUMENTATION
GRAPHICAL USER INTERFACE
MACHINERY

Langues

Anglais
Expert
Arabe
Langue Maternelle

Formation et Diplômes

Bently Nevada Vibration Course (BN-3500 Hardware & Software) & System 1 (Level 1) (Formation)
Institut de formation:
Bently Nevada at Rashpetco Training Center
Date de la formation:
April 2017
Durée:
25 heures
Process Hazard Analysis (PHA) (Level 1) (Formation)
Institut de formation:
Enppi (Online sessions)
Date de la formation:
November 2020
Durée:
25 heures
PLC Control System (Level 1) (Formation)
Institut de formation:
Enppi (Online sessions)
Date de la formation:
November 2020
Durée:
25 heures
MARK VIE Upgrade Training Course (Formation)
Institut de formation:
GE workshop (Online Sessions)
Date de la formation:
February 2021
Durée:
40 heures
CompEx (Certificat)
Date de la formation:
December 2021
Valide jusqu'à:
December 2026