Fahim Anwar

▪ Material receiving Inspection of HVAC Material / equipment as per procurement order (PO) review Mill Test Certificates (MTC), RTA, in accordance with applicable codes & standards like SAEP 1151, ASHRAE, SMACNA, SAER 1972, UL, etc.
▪ Perform the installation Inspection of duct work, as per ITP, IFC drawings and Inspection Checklist (ICL) by complying Saudi Aramco Standards, project specifications and SMACNA, ASHRAE & NFPA requirement.
▪ Witnessing, verifying and record the quality work being performed by the construction employee is satisfactory and with compliance with approved documents provided by the client and raise Request for Inspection (RFI) for Project Inspection Department (PID) in order to approve the activity is being inspected.
▪ Ensuring satisfactory identification of material, proper protection of Ducts, Terminal equipment, Supports, pipes and fittings, proper size and schedule/thickness of pipes.
▪ Conduct the inspection of sewer and storm manhole and inspection chamber.
▪ Inspection and witness of Hydro test.
▪ Reading and understanding of I.F.C drawings, ensuring that work is going on accordingly.
▪ Checked and understand the HVAC equipment schedule plan, to know the equipment specification and identification of location where to be install.
▪ Arranging the inspection for the plumbing, drainage and firefighting piping network.
▪ Responsible for arranging the inspection from the client inspection team for the installation of the plumbing fixtures and leak test etc.
▪ Preparing of Hydrostatic Test Packages and complete follow up of hydro test for chilled water supply and return piping.
▪ Conduct Testing, Adjusting and Balancing of HVAC system as per applicable standards.
▪ Conduct the Inspection of Plumbing works indoor and outdoor the building( Potable water, Sanitary Sewer)
▪ Inspection of all Plumbing activities before raising RFI.
▪ Joint Inspection, Water circulating pumps and water Hammer arrestors with SAPID as per Standard and specification.
▪ Issuance of non-conformance report (NCR’s) to construction department for the violation of Codes and Standards during work, close off of NCR when a successful corrective action is carried out fully confirmed with quality requirement.
▪ Follow up of PMCC list / Punch list, items in order to finalize the facility work.
▪ Installation inspection of different types of gaskets (isolating, spiral wound) & bolt tightening of flange joints including blind flanges as per the approved procedure. .
▪ attending monthly QA/QC meetings conducted by top management in order to review the monthly progress done and to plan for next month work.
▪ Making and updating of Final Record Book for inspection.
▪ Reduced product rejection rate by 30 percent through implementation of improvements by following quality control inspection.
▪ Rejected company-produced materials that did not meet standards.

▪ Estimation, Modification of flow line for different Equipment.
▪ Study and designing of different parts used in machines and projects.
▪Site surveillance before scheduling the commissioning date & time to ensure that activity is ready to proceed in order to avoid wastage of valuable time of client and third party.
▪ Responsible to customer’s queries and problems to the customer’s full satisfaction.
▪ Installation, inspection and commissioning of flow line for 20 bar air compressor.
▪ Estimating and making of drawing for different parts during project by using Auto CAD.
▪Planning, executing, leading and controlling the testing & commissioning process as per Method of Statement.
▪ Preparation of monthly, quarterly and annual reports.
▪ Provide technical input to spares enquiries and orders to ensure that the correct components to the latest design are used and to ensure quality control.
▪ Preparation of Work Progress Reports.
▪ Workshop and tools / equipment inventory control.
▪ Support the generation of Fabrication improvements for the benefit of customers.
▪ Ensuring that all the measuring instruments i.e. pressure gauges, temperature gauges, flow meters and pressure relief valves are calibrated and certificates are attached in the package.
▪Checking and observing the equipment for noise, vibration, leak, high pressure, and overheating during operation.
▪Noting the data of equipment i.e. pumps, heaters, motors, AHU’s, FCU’s, and PRV’s during operation and comparing it with the design data for conformance.
▪Checking the ampere, voltage, frequencies & shaft rpm of electric motors during operation and compare it with the design data for conformance.

Designing and estimation of flow line for different projects. (3D, 2D)
▪ Study and designing of different parts used in machines and projects.
▪Site surveillance before scheduling the commissioning date & time to ensure that activity is ready to proceed in order to avoid wastage of valuable time of client and third party.
▪ Modification and changing of parts drawing during site construction if necessary while using Auto CAD.
▪ Responsible to customer’s queries and problems to the customer’s full satisfaction.
▪ Designing, installation, inspection and commissioning of flow line for 20 bar air compressor.
▪ Estimating and making of drawing for different parts during project by using Auto CAD.
▪Planning, executing, leading and controlling the testing & commissioning process as per Method of Statement.
▪Instructing the test & commissioning crew on every step so that the activity could be carried out safely.
▪ Preparation of monthly, quarterly and annual reports.
▪ Provide technical input to spares enquiries and orders to ensure that the correct components to the latest design are used and to ensure quality control.
▪ Preparation of BOQ (Bill Of Quantity), Preparation of RFP (Request for Purchase) and RFQ (Request for Quotation).
▪ Preparation of Work Progress Reports.
▪ Fabrication of Tanks, Pressure Vessels, Pipes.
▪ Inspection of Welding during fabrication.
▪ Workshop and tools / equipment inventory control.
▪ Carry out research in the different types of fuel and energy, materials handling, strength.
▪ Support the generation of Fabrication improvements for the benefit of customers.
▪ Ensuring that all the measuring instruments i.e. pressure gauges, temperature gauges, flow meters and pressure relief valves are calibrated and certificates are attached in the package.
▪Checking and observing the equipment for noise, vibration, leak, high pressure, and overheating during operation.
▪Noting the data of equipment i.e. pumps, heaters, motors, AHU’s, FCU’s, and PRV’s during operation and comparing it with the design data for conformance.
▪Checking the ampere, voltage, frequencies & shaft rpm of electric motors during operation and compare it with the design data for conformance.

3: Mechanical Commissioning / Maintenance Engineer:
▪ Material and cost estimation for the projects, monitoring daily incoming and outgoing raw material.
▪Complete supervision of site mechanical related activities.
▪ Daily site surveillance to ensure that all the mechanical work is going on as per daily planning with compliance of project standards & specifications.
▪Instructing site crew to perform their duties safely and efficiently.
▪ Prepare regular analysis and reports of Design activities.
▪Responsible for Providing the latest tools, equipment and machinery to workers in order to get the quality production and instructing the workers about the importance of quality work.
▪Ensuring the safety requirement and implementation of housekeeping techniques at site.
▪Complete coordination with Site Engineer, site supervisor in order to perform quality work.
▪ Installation and Commissioning of Pipes and Valves and Other Equipment.
▪Attending weekly and monthly meetings with top management in order to have a look on previous and upcoming targets.
▪Supervision and explanation of site situation during site audit of top management.
▪ Reading and understanding of I.F.C drawings, ensuring that work is going on accordingly. Making as built drawings if required.
▪ Ensuring satisfactory identification of material, proper protection of Ducts, Terminal equipment, Supports.
▪Reading & understanding of construction drawings and ensuring that work is going on accordingly.
▪Complete coordination with Site Engineer, site supervisor in order to perform quality work.
▪ Making and updating of Final Record Book for inspection.
▪ Preparation of monthly, quarterly and annual reports.

Worked as Mechanical Engineer (Maintenance) at Linde Gases (BOC) Pakistan Limited.
(From October 2006 to July 2010)
▪ Prepared schedule for project and procured necessary raw materials and man power for same.
▪ Responsible for Plant’s and Cooling tower’s corrective, preventive repair/maintenance.
▪ Select, specified, installed and managed the maintenance of plant machinery and products.
▪ Overhauling and servicing of pump.
▪ Servicing and Dismantling of air compressors (Multistage).
▪ Servicing and Maintenance of Chiller plant and its components.
▪ Servicing and Maintenance of Cooling towers and its components.
▪ Dismantling and Servicing of Valve, Pipe fitting, Pressure Regulator.
▪ Modification of parts during maintenance of machines.
▪ Eriction and commissioning of 30 tons per day carbon dioxide plant.
▪ Installation and alignment of pumps, compressors, heat exchangers.
▪ Estimation and Installation of air flow line (Pipeline) for 30 TPD Carbon dioxide plant.
▪ Supervised the process and operation of processing plants like Compressors.
Servicing and Repairing of intercooler and heat exchangers.
▪ Prepare regular analysis and reports of maintenance activities.

BOC TAXILA PAKISTAN