Commissioning Engineer
Daewoo Engineering & Construction
مجموع سنوات الخبرة :17 years, 11 أشهر
Kuwait Gulf Operation & Saudi Aramco Joint Venture
1. Prepare and design MS for Pre-Commissioning activity for instrumentation, telecommunication and fire and alarm system work execution for client approval.
2. Evaluated the efficacy and consistency of the performance of actual application and integrity
3. Handled the vendor documentation and coordinated with various departments within the company.
3. Conducted and coordinated with various departments and performed Site Acceptance Tests.
4. Carrying out loop functional test with complete documentation as per Saudi Aramco requirements.
5. Check, test and verify all instrument are in service as per system and sub-system code prior to introduce gas for start-up.
6. Supported activities involving project management and system architecture.
7. Provided technical solution relative to control system.
1. Determined DCS engineering problem and proposed solution.
2. Upgrading field communicator using easy upgrade utility tool for HART & FF type latest DD file for configuration.
3. Performed and assigned under trouble shooting and rectify such
4. Smart type & fieldbus transmitter operation, programing, calibration and fault finding.
b) Control Valve operation, programing (smart & fieldbus positioner), calibration and fault finding.
5. Understanding cause and effect and ESD block diagram.
6. Testing and calibration for fire and gas system and field equipment.
7. Work with the vendor under Site acceptance test such as:
a) Plant air compressor System
b) Hypochlorite package
c) Desalination package
d) DCS, SIS and Fire and gas system
e) Flare System
f) Sea Water Intake Unit
Energy for Industrial Project EPC Contractor
Project Tittle: Installation of 48, 000 m³/day Industrial Wastewater Treatment Plant (IWTP-II) Yanbu
Client: Marafiq Power & Water Company for Jubail & Yanbu Kingdom of Saudi Arabia
1. Material Receiving Inspection and prepare all related documents to be offered to the main client for inspection and approval.
2. Assign to prepare and design ITP, QCP and MS for Instrumentation, telecommunication and fire and alarm system work execution for client approval.
3. Review and comment on quality control program developed by sub-contractors.
4. Observed/ Write Site Observation report (SOR), Non-Compliance Report (NCR).
5. Monitor sub-contractor installation work at site as per project specification and Manufacturer Recommendation.
6. Able to analyzed every area to be survey and witness prior for RFI to be offered to the main client for inspection.
7. Witness and involve for instrument calibration, installation, loop test and function testing to verify and to comply as per project requirements.
8. Involve Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) of DCS System Emerson Delta V.
9. Inspection and witness of installation & testing of Control, Signal and Fiber Optic Cable.
10. Involved in field functional tests, loop tests, calibration of the field instruments including gas and water analyzer systems (i.e. analytical, Chlorine, Turbidity, TOC, pH,
Phosphorous, Dissolve Oxygen etc.), interface with DCS.
PPDC Complex Batangas II Mariveles Bataan Philippines
1. Attending daily jobs allotted by the Maintenance Department like PM Check, Alarm and Trip Checks and other instrument related jobs.
2. Perform and prepare materials tools and equipment prior to start a job assigned.
3. Perform of projects for calibration, installation, commissioning, hot cutover, also involved in plant shutdown under the trouble shooting management team.
4. Test, check, troubleshoot and rectify problems on control loops interfacing with DCS (Yokogawa centum).
5. Removes defective instrument from system decontaminate disassembles and clean instruments and replacing defective parts using hand tools, Lubricate instrument and replaces defective wiring and tubing’s.
6. Procurement of work permits and canceling them once the job is completed, coordinating with the area control room operations and field operators while attending the jobs.
7. Performs the regular routine inspection of all instruments in assigned area. Carries out maintenance and repair work and strips, cleans, checks and recalibrates electrical instrument, as assigned by the supervisor, during shutdowns.
8. Maintain such a loop function test, repair, troubleshoot different types of instruments like level, flow pressure and temperature transmitter and switches.
9. Perform trouble shooting the marshalling cabinet of DCS and MCC.
10. Perform quality of work is my motto as a instrument technician.
11. Complies, the project safety requirements.
12. Maintain such a loop function test, repair, troubleshoot different types of instrument like level, flow pressure and temperature transmitter and switches.
13. Carries out the routine, predictive and preventive maintenance checks on instrumentation and associated systems in any area of the assigned plant. Includes checking for leakages on impulse lines, cleaning transmitters, checking for malfunction.
Daewoo E&C Joint Venture
Project: Q-Chem-II Consortium Project
Industrial City State of Qatar
Daewoo E&C Joint Venture
Project: Qatar Gas Laffan Refinery Consortium Project
Ras Laffan Industrial City State of Qatar
Project: Ethylene Glycol Project (YAEG-2)
Client: Yanbu National Petrochemical Company (Yansab) Yanbu K.S.A
Responsible On;
•Prepare and design MS for Pre-Commissioning activity for instrumentation, telecommunication and fire and alarm system work execution for client approval.
•Evaluated the efficacy and consistency of the performance of actual application and integrity
•Handled the vendor documentation and coordinated with various departments within the company.
•Conducted and coordinated with various departments and performed Site Acceptance Tests.
•Carrying out loop functional test with complete documentation as per Saudi Aramco requirements.
•Check, test and verify all instrument are in service as per system and sub-system code prior to introduce gas for start-up.
•Supported activities involving project management and system architecture.
•Provided technical solution relative to control system.
•Determined DCS engineering problem and proposed solution.
•Upgrading field communicator using easy upgrade utility tool for HART & FF type latest DD file for configuration.
•Performed and assigned under trouble shooting and rectify such a:
•Smart type & fieldbus transmitter operation, programing, calibration and fault finding.
•Control Valve operation, programing (smart & fieldbus positioner), calibration and fault finding.
•Understanding cause and effect and ESD block diagram.
•Testing and calibration for fire and gas system and field equipment.
•Work with the vendor under Site acceptance test such as:
•Plant air compressor System
•Hypochlorite package
•Desalination package
•DCS, SIS and Fire and gas system
•Flare System
•Sea Water Intake Unit