MANAGER
RELIANCE INDUSTRIES LIMITED, DAHEJ MANUFACTURING
Total years of experience :16 years, 11 Months
• To tackle all the emergencies occurring regarding electrical system during the shift.
• To co-ordinate all maintenance activities for plant electrical equipments.
• Testing, Health check, condition monitoring, Maintenance and Overhauling of
Electrical installation.
• Manpower scheduling and organizing to carryout maintenance works and meeting
engineering solution.
• Executing jobs as per SOP & SMP and adopted E-Permit procedures.
• Coordination with process and other maintenance departments for planning and prioritization and execution of tasks, maintaining inter departmental co-ordination
• To ensure availability and reliability of electrical system/equipments.
• Engineering support in the preventive, corrective, trouble shooting, shutdown & major & minor maintenance activities on various types of HV/LV equipments & distribution system.
• Preparation of various reports related to Operation and Maintenance activities.
• Synchronizing of Generators.
• Maximum Demand control in case of generator tripping.
• Synchronizing with grid after islanding.
• Controlling parameters like voltage and frequency in case of islanding.
• Trouble shooting related to protection circuits and relays.
• Maintaining load shedding system.
• Taking 220KV Line Shutdown and restoring them.
• Taking shut down on Bus/Transformer for carrying out shut down activity in 220 KV
Switch yard.
• Co-ordination with GETCO Haldarva in case of line tripping or islanding or any other
transmission line related issues.
• Communication with SLDC in case of Power export/Power wheeling/Short term Open
Access.
• Exposure to SAP-PM & MM
• Management of Non supervisory Manpower.
• Condition monitoring of all the equipments of CPP and IOP.
• Condition monitoring and maintaining fire alarm system.
• Taking safe changeovers for any maintenance activity in HT/LT panels.
• Training to non supervisory Manpower and new joinees.
• Implementation of modifications (MOC) in HT/LT panels.
• Investigating the root cause (RCA) in case of failure of equipment.
•
• Following up of safety procedures and ensuring the same is followed by subordinates also.
• Providing temporary connections as per RIL Standards and thereby avoiding the possibility of Electrical fire.
• Condition monitoring of substations and substation equipments such as HT/LT
Panels, battery banks, battery chargers, UPS etc.
• Preparing and posting of daily electrical power consumption report.
• Operation and maintenance of DG Set.
• KEY AREAS OF KNOWLEDGE:
• Hands on experience of operation and maintenance of various HT/LT equipments.
• Familiar with Layout, Control schemes & interlocks of 220KV Switch yard (ABB Make)
• Familiar with control schemes of 33KV Gas Insulated Switchgear (ABB-Calor Make)
• Detail knowledge of control schemes of PCC, MCC, HT and LT Switchgear (L&T,
BHEL, VOLTAS, SIEMENS, GEC-ALSTOM make)
• Familiar with UPS, Battery chargers, PDB, LDB, EOT crane, DG sets etc.
• Familiar with the Protection Schemes of Grid incomer, Bus bar, Generator,
Transformer, HT/LT Motors etc
• Carrying out Preventive & Breakdown Maintenance of GTG/STG, Transformers,
HT & LT control panels, HT & LT motors, Motor Operated Valves, Circuit Breakers,
Isolators, Battery banks etc
• Trouble shooting and fault analysis.
• Familiar with Synchronizing of Generators.
• Hard wired as well as PLC Based Load shedding scheme and island mode operation.
• Familiar with applicable Electrical codes and standards
• Familiar with SCAP (Synchronizing Control & Annunciation Panel)
• Familiar with various types of Fire Detectors (PSD & ISD) and Fire detection Panels
(Tata Honeywell, DGFAP make)
• MAJOR PROJECTS:
• Installation of 220 KV 0.2s Accuracy class CT/ 0.2 Accuracy class CVT
• Active participation in Gas Turbine Generator Overhauling and Major Inspection
FIELD OPERATIONS AND PANEL ENGINEER
2. 1 year service in HIGH TENSION CELL department at TORRENT POWER LIMITED,
SURAT as Graduate Engineer Trainee (GET) from JUNE 2007 TO JUNE 2008
• JOB PROFILE:
• 66 KV Cable laying, jointing, termination, Testing & Commissioning
• Conducting type and routine tests on 66 KV cable as per IS standards
• 11 KV Underground cable fault Localization & clearing cable fault
• 11 KV cable laying & 11 KV Cable jointing and cable termination
• Cable identification from bunch of cables and Tracing cable route
• 11 K V ring operation, 11 KV ring modification work in existing system
• 11 KV O/H line erection and O/H line Maintenance
• Replacement of H T Switchgear
• Commissioning new 11 KV substation and new H T Consumer
• Operation & Maintenance of various H T switchgear of ABB, C G
LUCY, CROMPTON, SIEMENS, MERLIN GARIN make
• Knowledge of Operation and maintenance of 66/11 K V receiving station, VCB/SF 6
breakers, Availability based tariff, Servicing, Testing and Maintenance of Distribution
Transformer and H T/L T network
• Liaisoning with local agencies like Municipal Corporation, Telecom, Gas etc.
• TRAININGS/WORKSHOPS ATTENDED: 1. "LOW VOLTAGE SWITCHGEAR MAINTENANCE" by M/S Larsen & Toubro
2. "RELIANCE CERTIFIED ELECTRICAL ENGINEERS" at Reliance Corporate Park, Navi Mumbai
3. SUPERVISORY DEVELOPMENT PROGRAMME
MBA-SYMBIOSIS, PUNE with 72 % (Distinction) CORRESPONDENCE DISTANCE LEARNING MODE
B. E. ELECTRICAL ENGINEERING (FULL TIME) with 69 % (Distinction) from South Gujarat University
Diploma in Electrical Engg (FULL TIME) with 68 % (Distinction) from Maharaja Sayajirao University,Baroda
S S C