Gaber El-Sayed Mohamed Ghanem غانم, senior electrical design engineer

Gaber El-Sayed Mohamed Ghanem غانم

senior electrical design engineer

الاتحاد الهندسي السعودية (خطيب وعلمي)

Location
Saudi Arabia
Education
Bachelor's degree, بكالوريوس هندسة القوى والالات الكهربية
Experience
20 years, 11 Months

Share My Profile

Block User


Work Experience

Total years of experience :20 years, 11 Months

senior electrical design engineer at الاتحاد الهندسي السعودية (خطيب وعلمي)
  • Saudi Arabia - Riyadh
  • My current job since October 2013

• Design and tender document preparing and review, shop drawings, supplier pre-qualification and testing and commissioning for all electrical works of all the following projects: -
1- Power plant (25) Megawatt project at Dwadmi and finalize handover process.
2- Preparing design and tender documents for portable and separable (10) Megawatt power plant.
3- Construction of 132/13.8 KV primary station (100 megavolt-ampere + 50 mega volt-ampere) GIS extension at S/S 9037 (follow up and reporting the construction process).
4- Preparing design and tender documents for chiller plant at AL-HAREQU.
5- Supporting buildings project at DWADMI 400 and this project consist of: -
a. Utilities buildings (R.O plant, Waste water treatment plant (1000m3/day), Chiller plant, Strategic water tank 30000 m3, and Substations buildings (5 substations).
b. Residential buildings (19) buildings such as VIP suites and Furnished flats buildings.
c. Service buildings such as (mosque for 500 persons, Dining hall for 900 persons and VIP, Dining hall for 900 persons and VIP, Sports hall for 400 persons, Administration building, Clinic and self-laundry buildings.
d. All infrastructure works (medium voltage network, low voltage networks, lift stations, irrigation system, site lighting, Etc.).
6- Administrative, service and residential project at DWADMI 700 and this project consist of: -
a. Utilities buildings (R.O plant (1500 m3 /day) double stream, Sewage treatment plant STP (1500 m3 /day), R.O feeder tank 1500 m3, Strategic water tank 30000 m3, Substations buildings (6 substations).
b. Residential buildings (16) buildings such as Furnished flats buildings and VIP suites (3) buildings.
c. Service buildings such as (mosque for 700 persons, Dining hall for 650 persons and VIP, Sports hall for 700 persons, Cultural hall, Officers club, Soldiers club, Administration buildings (3) buildings, Command building, Control and operation building, Communication building).
d. All infrastructure works (medium voltage network, low voltage networks, lift stations, irrigation system, site lighting, Etc.).
7- Administrative, service area project at AL-HAREQU and this project consist of: -
a. Electrical utility interface and grid station (50MVA capacity).
b. Training center building.
c. Administration buildings (3) buildings, Control and operation building, Command building, Dining hall for 650 persons and VIP, Residential buildings (6) buildings such as Furnished flats buildings and VIP suites (1) building)
d. All infrastructure works (medium voltage network, low voltage networks, lift stations, irrigation system, site lighting, Etc.).

head of electrical design unit at مكتب العطيشان مهندسون استشاريون
  • Saudi Arabia - Riyadh
  • My current job since January 2009

• Re-design as needed and shop drawings approval and supervision for (General Auditing Bureau) building at Riyadh which considered high rise building administrative type.
• Re-design and shop drawings approval and supervision for ALDARAH hospital at Riyadh.
• shop drawings approval and re-design as needed for housing city for Tabouk university.
• Design and technical support team at (general design and studies department) building agency in ministry of education.
• Design all electrical drawings for, all projects, according to IEC 60364, IEE regulation 17th edition, BS 7671 and Saudi building code (SBC 401) Such as: -
a. Design switchgear, main distribution panel boards.
b. Design sub main distribution panel boards, final distribution boards and load schedules
c. Design ring main units (RMUs).
d. Design electrical distribution system using underground cables.
e. Design power factor improvement units by using static VAR compensator (SVC).
f. Design earthing system according several arrangement, TN-S, TN-C-S, TT and IT.
g. Design lightening protection system(LPS) according to IEC 62305, BS EN 62305 and
SBC 401-a-802.
h. Design light current system such as: -
i. Design fire alarm system according to NFPA and drawing approval from civil defense.
j. Design computer, data and telephone networks.
k. Design data show network suck as projector and smart board networks.
l. Design public address network.
m. Design closed circuit TV (CCTV) system.
• Prepare BOQ of electrical and electronic works for all projects.
• Modify electrical voltage to new standard voltage 231/400 volts and prepare new drawings for all projects to comply with the new voltage.
• Revision of all electrical drawings for proto-type schools which prepared by foreign consultant (Zas and KB consultant).
• Prepare general specifications and conditions for projects according to specification of construction institute (CSI) Division 16.
• Update materials specifications according to IEC, BS EN, SASO and other relevant standards.
• Work shop drawings and samples approval for all electrical works in projects.
• Prepare an illustrated guide for the adoption of the samples.
• Participation by a worksheet in second electrical safety experts' symposium in Riyadh.

مهندس تصميم اعمال كهربية at العطيشان للاستشارات الهندسية
  • Saudi Arabia - Riyadh
  • September 2009 to October 2013
مهندس قوي كهربية ( استشاري) at مكتب المعماريون السعوديون للاستشارات الهندسية
  • Saudi Arabia - Mecca
  • February 2007 to September 2009

supervision of some project at JEDDAH
1- Cultural hall at king Abdul-Aziz university.
2- Projects of MOE at EL-LIETH GOVERNERATE.
3- 160 beds hospital at EL-LIETH GOVERNERATE.
Project (s)
• workshop drawings approval and revision for all electrical works.
• Preparing of tender documents and BOQ
• Member of the Commission analysis of tenders.
• Supervision of all projects.
• Preparing the shop drawings and execution of 70 km overhead transmission line 33 KV. For (DEMA contracting est. as a part time).

مهندس مشرف على الاعمال الكهربية at شركة الحرمين للمقاولات والتوكيلات العامة
  • Egypt - Cairo
  • May 2001 to January 2005

مهندس مشرف على الاعمال الكهربية للشركة وهي :-
1- انشاء وتركيب بعض محططات التحويل جهد 66/11 ك ف
2- انشاء وتركيب بعض خطوط النقل الهوائية
3- انشاء وتركيب بعض خطوط التوزيع الهوائية
4- انشاء وتركيب محركات لمضخات المياه ببعض محطات الصرف الصحي
5- انشاء وتركيب وحدات ups
6- الاشراف على مشاريع الشركة في مجال الابنية التعليمية والمنشاءات الصحية ودراسة عطاءات مقاولين الباطن

Education

Bachelor's degree, بكالوريوس هندسة القوى والالات الكهربية
  • at كلية الهندسة - جامعة المنصورة
  • May 2001

Specialties & Skills

Languages

English
Expert

Memberships

الهيئة السعودية للمهندسين
  • محترف
  • January 2010
نقابة المهندسين المصرية
  • مهندس
  • August 2001

Training and Certifications

ETAP software (Training)
Training Institute:
كلية الهندسة - جامعة المنصورة
Date Attended:
September 2001
Duration:
48 hours
محاضر بالندوه الثانية لخبراء السلامة الكهربية (Certificate)
Date Attended:
March 2012
ABB DOCWIN (Training)
Training Institute:
شركة ABB السعودية
Date Attended:
August 2010
Duration:
35 hours
SOFWAREE-CODIAL (Training)
Training Institute:
شركة شنايدر الكتريك
Date Attended:
October 2009
Duration:
35 hours